☆ 4.7 Article

Microstructural, physicochemical properties and starch digestibility of brown rice flour treated with extrusion and heat moisture

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

Endogenous protein and lipid facilitate the digestion process of starch in cooked quinoa flours

Shiyi Lu et al.

Summary: This study investigates the effects of endogenous proteins and lipids on starch digestibility in quinoa flour and explores the physicochemical and textural properties related to the digestion process. Cooked whole quinoa flours have the highest starch digestibility, while pure quinoa starch has the lowest digestibility. Gel network is identified as a primary factor affecting the digestion process of starch in different quinoa flours.

FOOD HYDROCOLLOIDS (2023)

Add to Collection

Article Chemistry, Applied

Effects of extrusion on structural properties, physicochemical properties and in vitro starch digestibility of Tartary buckwheat flour

Zhuo Zhang et al.

Summary: Tartary buckwheat is a healthy pseudocereal, but traditional processing methods can have a destructive effect on its starch structure. Improved extrusion processing technology can enhance the physicochemical properties and starch digestibility of Tartary buckwheat flour.

FOOD HYDROCOLLOIDS (2023)

Add to Collection

Article Chemistry, Applied

Structure, physicochemical properties and in vitro digestibility of extruded starch-lauric acid complexes with different amylose contents

Qing Liu et al.

Summary: This study investigated the effects of amylose content and lauric acid content on the properties and digestibility of extruded starch-lipid complexes. It was found that both amylose and lauric acid content had an impact on the properties and resistant starch content of the complexes, providing theoretical and practical guidance for industrial production of starch-lipid complexes.

FOOD HYDROCOLLOIDS (2023)

Add to Collection

Article Chemistry, Applied

Effects of treatment methods on the formation of resistant starch in purple sweet potato

Hongrui Sun et al.

Summary: All three treatments were able to transform the starch crystalline structure from C-type to B-type, resulting in the formation of resistant starch from purple sweet potato. Resistant starch prepared via pullulanase-autoclaving combination treatment exhibited the highest gelatinisation enthalpy value and the greatest degree of overall thermal stability.

FOOD CHEMISTRY (2022)

Add to Collection

Article Food Science & Technology

Effects of roasting on storage degradability and processing suitability of brown rice powder

Miho Fukui et al.

Summary: This study investigated the storage stability and processing suitability of roasted brown rice powder for the development of new roasted brown rice products. Different roasting levels were applied to the brown rice powder, and various analyses were conducted to evaluate its color, degradability, antioxidant activity, and processing properties. The results showed that darker roasting levels led to lower moisture content and acid value, higher antioxidant activity, and improved processing suitability. The dark roast was identified as the optimal roasting level due to its superior storage stability and functionality.

LWT-FOOD SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Food Science & Technology

In vitro gastric digestion and emptying of cooked white and brown rice using a dynamic human stomach system

Junyan Wang et al.

Summary: This study shows that brown rice has higher pH buffering capacity and larger digesta particle size due to the protective effect of the outer bran layer, resulting in lower starch hydrolysis and overall digestibility in the stomach compared to white rice. Additionally, the in vitro system demonstrated effective size reduction and sieving efficiency in digesta emptied out of the stomach in both white and brown rice during digestion.

FOOD STRUCTURE-NETHERLANDS (2022)

Add to Collection

Article Chemistry, Applied

LF-NMR as a tool for predicting the 3D printability of surimi-starch systems

Yang Liu et al.

Summary: The study found that LF-NMR parameters could accurately predict the 3D printability of the surimi-starch systems, with high correlation coefficients and good predictive performance.

FOOD CHEMISTRY (2022)

Add to Collection

Article Chemistry, Applied

Pre-fermentation of rice flour for improving the cooking quality of extruded instant rice

Shunjing Luo et al.

Summary: Pre-fermentation can improve the cooking quality of extruded instant rice by increasing its hardness, stickiness, and water absorption, and reducing the cooking loss. This is achieved through increased starch and amylose content, as well as changes in the molecular structure of starch, which promote the formation of a strong gel network.

FOOD CHEMISTRY (2022)

Add to Collection

Article Chemistry, Applied

Effects of different hydrocolloids on the water migration, rheological and 3D printing characteristics of ?-carotene loaded yam starch-based hydrogel

Lei Feng et al.

Summary: This study investigated the effects of different gums on the properties of fi-carotene loaded yam starch-based hydrogel. It was found that the addition of certain gums improved water migration, rheological, and 3D printing properties, resulting in better appearance and formability of the printed objects.

FOOD CHEMISTRY (2022)

Add to Collection

Article Food Science & Technology

Effect of steaming and roasting on the quality and resistant starch of brown rice flour with high amylose content

Jiyoung Park et al.

Summary: This study improved the RS content of rice powder through heat treatment. Steaming rough rice and brown rice, followed by roasting the brown rice, enhanced the quality of rice powder.

LWT-FOOD SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Review Chemistry, Applied

A review on structural, digestibility and physicochemical properties of legume starch-lipid complexes

Samson A. Oyeyinka et al.

Summary: There is a growing interest in alternative sources of starch, with legume starches being considered suitable alternatives. The formation of V-amylose complexes through lipid modification has improved properties and is regarded as a clean-label ingredient. This review highlights the current research on V-amylose complexes formed using legume starches and suggests research gaps for better utilization in the industry.

FOOD CHEMISTRY (2021)

Add to Collection

Article Food Science & Technology

Effect of twin-xuscrew extrusion combined with cold plasma on multi-scale structure, physicochemical properties, and digestibility of potato starches

Xiangxiang Sun et al.

Summary: The study found that cold plasma treatment slightly changed starch granule morphology, increased crystallinity, and resistant starch content. The combination of twin-screw extrusion and cold plasma promoted depolymerization of starch chains and solubility, enhancing the degree of hydrolysis of modified starch.

INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2021)

Add to Collection

Article Food Science & Technology

Process optimization, digestibility and antioxidant activity of extruded rice with Agaricus bisporus

Zihan Shao et al.

Summary: The study successfully optimized the process parameters of Agaricus bisporus extruded rice through extrusion technology and addition of mushroom powder, improving its texture, antioxidant activity, and other properties.

LWT-FOOD SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Applied

The effect of heat moisture treatment on crystallinity and physicochemical-digestibility properties of purple yam flour

Asranudi et al.

Summary: Purple yam flour was successfully modified through heat moisture treatment (HMT) in three cycles using an oven (OHMT) and autoclave (AHMT) at different temperatures and moisture levels. The study analyzed the molecular structural changes, swelling capacity, solubility, and digestibility parameters of the native and modified flours. Results showed that the treatments decreased swelling capacity, solubility, and rapidly digestible starch (RDS), while resistant starch (RS) and slowly digestible starch (SDS) increased relative to the native flour. FT-IR analysis revealed changes in absorption bands, and XRD patterns indicated a starch type change from B to A with increased relative crystallinity in most samples after HMT. Overall, the study suggested that the treatments improved the functional properties of purple yam flour, making it suitable for various food industries.

FOOD HYDROCOLLOIDS (2021)

Add to Collection

Article Entomology

Characteristics of functional brown rice prepared by parboiling and microwave drying

Wenyan Huang et al.

Summary: The study showed that parboiling and microwave drying processes significantly increased resistant starch and total dietary fiber content of brown rice, enhanced umami taste, reduced hardness, acidity, and bacterial counts, leading to a longer shelf-life.

JOURNAL OF STORED PRODUCTS RESEARCH (2021)

Add to Collection

Article Food Science & Technology

Extrusion pregelatinization improves texture, viscoelasticity and in vitro starch digestibility of mango and amaranth flours

Daniel E. Garcia-Valle et al.

Summary: The study investigated the impact of extruding pregelatinization on amaranth and mango flours, revealing significant changes in the characteristics of the flours, such as disruption of starch structure and alterations in starch digestibility. Amaranth flour, with higher protein content, demonstrated higher levels of slowly digestible starch, potentially due to its ability to form complexes with starch. Extrusion was found to have a strong effect on the properties of both flours, as indicated by principal component analysis.

JOURNAL OF FUNCTIONAL FOODS (2021)

Add to Collection

Article Chemistry, Applied

Introduction of chlorogenic acid during extrusion affects the physicochemical properties and enzymatic hydrolysis of rice flour

Yuxue Zheng et al.

Summary: The study found that chlorogenic acid had a negative impact on the physicochemical properties and starch hydrolysis of rice flour during extrusion, promoting the formation of V-type crystals, increasing the binding amount of CHA, reducing rapidly digestive starch, and increasing resistant starch. This information could provide important guidance for utilizing CHA in the processing of healthy starchy foods in the future.

FOOD HYDROCOLLOIDS (2021)

Add to Collection

Review Biochemistry & Molecular Biology

Starch-lipid interaction alters the molecular structure and ultimate starch bioavailability: A comprehensive review

Veda Krishnan et al.

Summary: The article discusses the impact of starch-lipid interactions on bioavailability, focusing on the roles of endogenous and exogenous lipids in the food matrix, and the influence of different types and concentrations of fatty acids on bioavailability.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Physical modification on the in vitro digestibility of Tartary buckwheat starch: Repeated retrogradation under isothermal and non-isothermal conditions

Xiaojiang Wu et al.

Summary: This study investigated the effects of repeated retrogradation at different temperatures on the in vitro digestibility and structures of Tartary buckwheat starch. The results indicated that repeated retrogradation treatment could improve the slow-digesting properties of starch and alter its crystallization type.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Food Science & Technology

Thermal, pasting, and rheological properties of potato starch dual-treated with CaCl2 and dry heat

Hongcai Zhang et al.

Summary: CaCl2 treatment alone increased thermal transition parameters, while DH treatment alone reduced them. Dual treatment with CaCl2 and DH caused substantial decreases in examined properties of PS, leading to cooked suspensions with extremely low shear viscosity.

LWT-FOOD SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Food Science & Technology

Effect of defatting and extruding treatment on the physicochemical and storage properties of quinoa (Chenopodium quinoa Wild) flour

Ruihan Huang et al.

Summary: The study developed novel quinoa flours through defatting and extruding treatments, with defatting treatment preventing lipid oxidation effectively and extruding treatment affecting proximate composition and physical properties. The extruded flour showed advantages in certain food applications like food for elderly or weaning food, but exhibited poor storage behavior. The findings aim to provide a scientific basis for future industrial development of quinoa flour.

LWT-FOOD SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Food Science & Technology

In Vitro Digestibility and Predicted Glycemic Index of Chemically Modified Rice Starch by One-Step Reactive Extrusion

Canxin Cai et al.

STARCH-STARKE (2020)

Add to Collection

Article Chemistry, Applied

Microwave pretreatment promotes the annealing modification of rice starch

Yejun Zhong et al.

FOOD CHEMISTRY (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Effect of heat-moisture treatment on the structure and physicochemical properties of ball mill damaged starches from different botanical sources

Chong Liu et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Chemistry, Applied

Multivariate data analysis of trace elements in bivalve molluscs: Characterization and food safety evaluation

Isa dos S. Barbosa et al.

FOOD CHEMISTRY (2019)

Add to Collection

Article Chemistry, Applied

The effect of extrusion puffing on the physicochemical properties of brown rice used for saccharification and Chinese rice wine fermentation

Chia-Hung Kuo et al.

FOOD HYDROCOLLOIDS (2019)

Add to Collection

Article Food Science & Technology

Effects of extrusion process conditions on system parameters; physicochemical properties and cooking characteristics of extruded fortified rice kernels

Chandrakant Genu Dalbhagat et al.

JOURNAL OF CEREAL SCIENCE (2019)

Add to Collection

Article Biochemistry & Molecular Biology

The combined effects of extrusion and heat-moisture treatment on the physicochemical properties and digestibility of corn starch

Xiang Yan et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Chemistry, Applied

Effects of debranching and repeated heat-moisture treatments on structure, physicochemical properties and in vitro digestibility of wheat starch

Meng-Na Li et al.

FOOD CHEMISTRY (2019)

Add to Collection

Article Chemistry, Applied

Starch digestibility and molecular weight distribution of proteins in rice grains subjected to heat-moisture treatment

Wyller Max Ferreira Silva et al.

FOOD CHEMISTRY (2017)

Add to Collection

Article Chemistry, Applied

Effects of whey protein concentrate, feed moisture and temperature on the physicochemical characteristics of a rice-based extruded flour

Carla da Silva Teba et al.

FOOD CHEMISTRY (2017)

Add to Collection

Article Food Science & Technology

Impact of heat-moisture treatment applied to brown rice flour on the quality and digestibility characteristics of Korean rice cake

Min-Ji Kim et al.

FOOD SCIENCE AND BIOTECHNOLOGY (2017)

Add to Collection

Article Biochemistry & Molecular Biology

Effect of reaction solvents on the multi-scale structure of potato starch during acid treatment

Binghua Sun et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

Add to Collection

Article Food Science & Technology

Stabilization of Tarom and Domesiah cultivars rice bran: Physicochemical, functional and nutritional properties

Ali Rafe et al.

JOURNAL OF CEREAL SCIENCE (2017)

Add to Collection

Article Food Science & Technology

Heat-moisture treatment and acid hydrolysis of corn starch in different sequences

Jun-Jie Xing et al.

LWT-FOOD SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Applied

Effect of heat-moisture treatment on multi-scale structures and physicochemical properties of breadfruit starch

Xiaoyan Tan et al.

CARBOHYDRATE POLYMERS (2017)

Add to Collection

Article Chemistry, Applied

Molecular structure and physicochemical properties of starch isolated from hydrothermally treated brown rice flour

Linlin Bian et al.

FOOD HYDROCOLLOIDS (2016)

Add to Collection

Article Chemistry, Applied

Effect of extrusion on phytochemical profiles in milled fractions of black rice

Huihui Ti et al.

FOOD CHEMISTRY (2015)

Add to Collection

Article Chemistry, Applied

Effect of single and dual heat-moisture treatments on properties of rice, cassava, and pinhao starches

Bruna Klein et al.

CARBOHYDRATE POLYMERS (2013)

Add to Collection

Article Chemistry, Applied

Synthesis, characterisation and in vitro digestibility of carboxymethyl potato starch rapidly prepared with microwave-assistance

Jia Liu et al.

FOOD CHEMISTRY (2012)

Add to Collection

Article Chemistry, Applied

Effect of heat-moisture treatment on rice starch of varying amylose content

Elessandra da Rosa Zavareze et al.

FOOD CHEMISTRY (2010)

Add to Collection

Article Chemistry, Applied

Impact of annealing on the molecular structure and physicochemical properties of normal, waxy and high amylose bread wheat starches

H. Lan et al.

FOOD CHEMISTRY (2008)

Add to Collection

Article Engineering, Chemical

The effect of extrusion conditions on the physicochemical properties and sensory characteristics of rice-based expanded snacks

QB Ding et al.

JOURNAL OF FOOD ENGINEERING (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.