Related references
Note: Only part of the references are listed.Preparation and characterization of bioplastics from silylated cassava starch and epoxidized soybean oils
Jianlei Yang et al.
CARBOHYDRATE POLYMERS (2023)
Plasticized hydroxypropyl cassava starch blended PBAT for improved clarity blown films: Morphology and properties
Kiattichai Wadaugsorn et al.
INDUSTRIAL CROPS AND PRODUCTS (2022)
A Comprehensive Review on the Emerging Roles of Nanofillers and Plasticizers towards Sustainable Starch-Based Bioplastic Fabrication
Shiou Xuan Tan et al.
POLYMERS (2022)
Fractionation of technical lignin and its application on the lignin/poly-(butylene adipate-co-terephthalate) bio-composites
Shao-Jun Xiong et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)
Characterisations of cassava starch and poly(butylene adipate-co-terephthalate) blown film with silicon dioxide nanocomposites
Danaya Phothisarattana et al.
INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY (2022)
Effect of maleic anhydride and titanate coupling agent as additives on the properties of poly (butylene adipate-co-terephthalate)/thermoplastic starch films
Zepeng Wang et al.
POLYMER BULLETIN (2022)
Plastic is in the air: Impact of micro-nanoplastics from airborne pollution on Tillandsia usneoides (L.) L. (Bromeliaceae) as a possible green sensor
Sara Falsini et al.
JOURNAL OF HAZARDOUS MATERIALS (2022)
Sustainable Wood-Based Poly(butylene adipate-co-terephthalate) Biodegradable Composite Films Reinforced by a Rapid Homogeneous Esterification Strategy
Shixin Yu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)
Thermoplastic starch from corn and wheat: a comparative study based on amylose content
Mhd. Mazen Altayan et al.
POLYMER BULLETIN (2021)
High content corn starch/Poly (butylene adipate-co-terephthalate) composites with high-performance by physical-chemical dual compatibilization
Chengqiang Li et al.
EUROPEAN POLYMER JOURNAL (2021)
Investigation into lignin modified PBAT/thermoplastic starch composites: Thermal, mechanical, rheological and water absorption properties
Ming Li et al.
INDUSTRIAL CROPS AND PRODUCTS (2021)
Robust multiphase and multilayer starch/polymer (TPS/PBAT) film with simultaneous oxygen/moisture barrier properties
Christina C. Chang et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)
Technical Lignin Valorization in Biodegradable Polyester-Based Plastics (BPPs)
Si-Jie Zhou et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)
Advanced and versatile lignin-derived biodegradable composite film materials toward a sustainable world
Han-Min Wang et al.
GREEN CHEMISTRY (2021)
Effect of sodium citrate/polyethylene glycol on plasticization and retrogradation of maize starch
Kang Zhang et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Effects of sorbitol and formamide plasticizers on molecular motion in corn starch studied using NMR and DMTA
A. Baran et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Economically Competitive Biodegradable PBAT/Lignin Composites: Effect of Lignin Methylation and Compatibilizer
Shao-Jun Xiong et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Ecofriendly Preparation and Characterization of a Cassava Starch/Polybutylene Adipate Terephthalate Film
Tan Yi et al.
PROCESSES (2020)
Effects of high starch content on the physicochemical properties of starch/PBAT nanocomposite films prepared by extrusion blowing
Xiaosong Zhai et al.
CARBOHYDRATE POLYMERS (2020)
Poly(butylene adipate-co-terephthalate)/thermoplastic starch/zeolite 5A films: Effects of compounding sequence and plasticizer content
Kannika Yimnak et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)
Tunable, UV-shielding and biodegradable composites based on well-characterized lignins and poly(butylene adipate-co-terephthalate)
Han-Min Wang et al.
GREEN CHEMISTRY (2020)
Corn starch plasticized with isosorbide and filled with microcrystalline cellulose: Processing and characterization
Miguel R. Area et al.
CARBOHYDRATE POLYMERS (2019)
The effect of plasticizer selection on properties of blends poly(butylene adipate-co-terephthalate) with thermoplastic starch
Frantisek Ivanic et al.
EUROPEAN POLYMER JOURNAL (2019)
Toughening polylactide by direct blending of cellulose nanocrystals and epoxidized soybean oil
Sakil Mahmud et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2019)
Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization
Xin Wang et al.
COMPOSITES PART B-ENGINEERING (2019)
Poly (Lactic Acid)/Thermoplastic Starch Films: Effect of Cardoon Seed Epoxidized Oil on Their Chemicophysical, Mechanical, and Barrier Properties
Rosa Turco et al.
COATINGS (2019)
Elevated ductility, optical, and air barrier properties of poly (butyleneadipate-co-terephthalate) bio-based films via novel thermoplastic starch feature
Shuidong Zhang et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2019)
The effects of blend ratio and storage time on thermoplastic starch/poly(butylene adipate-co-terephthalate) films
Ray Anne Garalde et al.
HELIYON (2019)
Preparation and characterization of poly(lactic acid) plasticized with vegetable oils and reinforced with sisal fibers
A. Orue et al.
INDUSTRIAL CROPS AND PRODUCTS (2018)
Barrier properties and mechanical strength of bio-renewable, heat-sealable films based on gelatin, glycerol and soybean oil for sustainable food packaging
Emiliano M. Ciannamea et al.
REACTIVE & FUNCTIONAL POLYMERS (2018)
Starch, cellulose acetate and polyester biodegradable sheets: Effect of composition and processing conditions
Allan Robledo Fialho e Moraes et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Epoxidized Jatropha Oil as a Sustainable Plasticizer to Poly(lactic Acid)
Buong Woei Chieng et al.
POLYMERS (2017)
A new approach in compatibilization of the poly(lactic acid)/thermoplastic starch (PLA/TPS) blends
Marzieh Akrami et al.
CARBOHYDRATE POLYMERS (2016)
Mechanical Properties, Hydrophobic Properties and Thermal Stability of the Biodegradable Poly(butylene adipate-co-terephthalate)/Maleated Thermoplastic Starch Blown Films
Hongwei Pan et al.
FIBERS AND POLYMERS (2016)
Improving functional properties of chitosan films as active food packaging by incorporating with propolis
Ubonrat Siripatrawan et al.
FOOD HYDROCOLLOIDS (2016)
Green plasticizers derived from soybean oil for poly(vinyl chloride) as a renewable resource material
Puyou Jia et al.
KOREAN JOURNAL OF CHEMICAL ENGINEERING (2016)
Influence of incorporation of starch nanoparticles in PBAT/TPS composite films
Paula Gonzalez Seligra et al.
POLYMER INTERNATIONAL (2016)
Isosorbide, a green plasticizer for thermoplastic starch that does not retrogradate
Daniele Battegazzore et al.
CARBOHYDRATE POLYMERS (2015)
Enhancement of thermoplastic starch final properties by blending with poly(ε-caprolactone)
Mario D. Ninago et al.
CARBOHYDRATE POLYMERS (2015)
Thermoplastic Starch Prepared with Different Plasticizers: Relation between Degree of Plasticization and Properties
Zuo Yingfeng et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2015)
Green films from renewable resources: Properties of epoxidized soybean oil plasticized ethyl cellulose films
Dong Yang et al.
CARBOHYDRATE POLYMERS (2014)
Thermoplasticized starch modified by reactive blending with epoxidized soybean oil
Ramzi Belhassen et al.
INDUSTRIAL CROPS AND PRODUCTS (2014)
Preparation and characterization of poly(lactic acid)/starch composites toughened with epoxidized soybean oil
Zhu Xiong et al.
CARBOHYDRATE POLYMERS (2013)
Acetylated and native corn starch blend films produced by blown extrusion
Olivia V. Lopez et al.
JOURNAL OF FOOD ENGINEERING (2013)
PBAT based nanocomposites for medical and industrial applications
Kikku Fukushima et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)
Biodegradable PBAT/Starch Nanocomposites
S. K. Nayak
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2010)
Thermal processing of starch-based polymers
Hongsheng Liu et al.
PROGRESS IN POLYMER SCIENCE (2009)
In situ compatibilization of maleated thermoplastic starch/polyester melt-blends by reactive extrusion
Jean-Marie Raquez et al.
POLYMER ENGINEERING AND SCIENCE (2008)
The processing of starch as a thermoplastic
RFT Stepto
MACROMOLECULAR SYMPOSIA (2003)