☆ 4.6 Article

Experimental study on the machining performance of nickel-based superalloy GH4169 milled by AWJ

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Performance comparison of EDM oil and biodiesel flushing media while μED milling of Inconel 718

K. ArunPillai et al.

Summary: Experimental investigation showed that biodiesel can be used as an alternative flushing media to hydrocarbon-based solvents in mu ED milling, providing a safer working environment but with lower metal removal rate and higher surface roughness compared to EDM oil.

MATERIALS AND MANUFACTURING PROCESSES (2023)

Add to Collection

Article Materials Science, Ceramics

Mechanism of Cf/SiC hole making with high shape precision using abrasive waterjet based on response surface method

Yifei Zhang et al.

Summary: This paper aims to explore the accurate control of hole shape for AWJ hole-making of Cf/SiC based on experimental and mathematical analysis methods, and the influence mechanism involved is emphatically analyzed. The results reveal that the standoff distance has the greatest influence on the difference (Ddifference) of hole shape, followed by the traverse speed, while the pressure and the abrasive flow rate have less influence. The traverse speed, pressure, and abrasive flow rate affect the Ddifference by changing the total energy of the jet; while the standoff distance mainly affects the Ddifference by changing the effective impact area, which is fundamentally different from other process parameters. In terms of interaction effects, decreasing the traverse speed and increasing the waterjet pressure can amplify the effect of interaction with the involvement of the standoff distance on the Ddifference. Based on the established Ddifference model and Doffset model, a control method that can achieve the desired hole shape is finally obtained for selecting the process parameters of AWJ machining.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Engineering, Mechanical

Modelling of surface morphology and roughness in fluid jet polishing

Zili Zhang et al.

Summary: Fluid jet polishing (FJP) is widely used in precision molding and optical components, but the understanding of surface morphology evolution on the micro scale is incomplete. This paper develops a physical model combining computational fluid dynamics (CFD) simulation and kinetic analysis to predict surface morphology and roughness after FJP. Different parameters are considered in the model and a series of polishing experiments are conducted to validate it.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Engineering, Mechanical

Complex shaped micro-channels generation using tools fabricated by AWJ milling process

Vijay Kumar Pal et al.

Summary: The fabrication of complex shape micro-tools using abrasive water jet milling strategy has been proposed and implemented in this study. By controlling the step over distance, the geometry of the fabricated micro-tools was analyzed. Experimental results indicate that, under certain conditions, the micro-tools fabricated using this strategy exhibit good performance on soft materials.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

An intelligent approach to predict thermal injuries during orthopaedic bone drilling using machine learning

Raj Agarwal et al.

Summary: A machine-learning model has been proposed in this study to predict temperature elevation during bone drilling and reduce thermal injuries. Through in vitro experiments, the accuracy of the machine-learning models was validated, and the ridge regression model was found to be the most accurate predictive model.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Wear and friction analysis of cubic boron nitride tools with different binders in high-speed turning of nickel-based superalloys

Luqiang Tu et al.

Summary: In this study, the wear and friction behaviors of various-binder cBN tools when turning Inconel 718 were analyzed, friction coefficients between cBN and Inconel 718 were determined, and tool flank temperature distributions were visually presented through FEM simulations under different flank wear conditions.

TRIBOLOGY INTERNATIONAL (2022)

Add to Collection

Article Engineering, Civil

Measurement and analysis of pocket milling features in abrasive water jet machining of Ti-6Al-4V alloy

Yuvaraj Natarajan et al.

Summary: This study investigates the size effect of abrasive water jet milling parameters on the square pockets of Ti-6Al-4V alloy. The results show that the abrasive mesh size, water jet pressure, and traverse rate have significant influence on the pocket features and surface roughness.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2022)

Add to Collection

Article Materials Science, Ceramics

Material removal mechanisms of ceramics turned by abrasive waterjet (AWJ) using a novel approach

Dun Liu et al.

Summary: The study established a prediction model for depth of penetration after AWJ turning of alumina ceramic and analyzed the material removal mechanism. The predicted model showed good results and indicated a mixed removal mechanism of brittle fracture and plastic shear for alumina ceramics turned by AWJ.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Automation & Control Systems

Influence of abrasive water jet parameters on the surface integrity of Inconel 718

Lorena Cano Salinas et al.

Summary: The study examines the impact of AWJ parameters on the surface quality and residual stress of IN718, proposing an empirical model for predicting the depth of cut. The results show that jet pressure is the most influential parameter on the surface roughness and depth of cut, while traverse speed and step-over distance significantly affect the residual stress. Additionally, the validation of the proposed model demonstrates around a 5% error in predicting the actual pocket depth.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Add to Collection

Article Automation & Control Systems

An investigation into the abrasive waterjet milling circular pocket on titanium alloy

Yemin Yuan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

Add to Collection

Article Thermodynamics

PVD AlTiN coating effects on tool-chip heat partition coefficient and cutting temperature rise in orthogonal cutting Inconel 718

Jinfu Zhao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Engineering, Chemical

Investigation on Material Response to Ultrahigh Velocity Impact on Ceramics by Micro Particle

Dun Liu et al.

TRIBOLOGY LETTERS (2016)

Add to Collection

Article Materials Science, Ceramics

Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box-Behnken design

Dun Liu et al.

CERAMICS INTERNATIONAL (2014)

Add to Collection

Article Engineering, Manufacturing

Mask-Less Pocket Milling of Composites by Abrasive Waterjets: An Experimental Investigation

D. S. Srinivasu et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)

Add to Collection

Article Engineering, Manufacturing

Electrochemical Micromachining of Complex Shapes on Nickel and Nickel-Based Superalloys

S. F. Huang et al.

MATERIALS AND MANUFACTURING PROCESSES (2014)

Add to Collection

Article Automation & Control Systems

Identification of the role of machinability and milling depth on machining time in controlled depth milling using abrasive water jet

Vijay Kumar Pal et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

Add to Collection

Article Engineering, Manufacturing

Tool wear characteristics in machining of nickel-based superalloys

Dahu Zhu et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)

Add to Collection

Article Engineering, Mechanical

Numerical simulation of surface roughness and erosion rate of abrasive jet micro-machined channels

R. Haj Mohammad Jafar et al.

WEAR (2013)

Add to Collection

Proceedings Paper Construction & Building Technology

A study on deviations of the jet with traverse speeds on different materials in pocket milling using Abrasive Water Jet Machining Process

T. V. K. Gupta et al.

ADVANCED MATERIALS DESIGN AND MECHANICS II (2013)

Add to Collection

Review Engineering, Manufacturing

Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids

A. Shokrani et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)

Add to Collection

Article Engineering, Industrial

Challenges in using waterjet machining of NiTi shape memory alloys: An analysis of controlled-depth milling

M. C. Kong et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)

Add to Collection

Article Engineering, Industrial

Effects of wire-EDM machining variables on surface roughness of newly developed DC 53 die steel: Design of experiments and regression model

K. Kanlayasiri et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)

Add to Collection

Article Engineering, Manufacturing

Application of Taguchi and response surface methodologies for geometric error in surface grinding process

JS Kwak

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.