☆ 4.5 Article

Preparation optimization by response surface and performance characterization of PEG-urea-dialdehyde starch adhesive

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Competitive reaction effect of vinyl acetate on preparation and characterization of thermosetting starch-based wood adhesives grafted by N-methylol acrylamide

Li Cheng et al.

Summary: N-methylol acrylamide (NMA) was added to a formaldehyde-free starch-based adhesive with the addition of vinyl acetate (VAc) to improve its thermosetting properties and wet strength. VAc reduced graft density and improved the uniformity of NMA, resulting in a starch-based adhesive with better stability and fluidity. The reaction between VAc and NMA inhibited overreaction and improved the water resistance of the adhesive.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2023)

Add to Collection

Article Engineering, Chemical

Environmentally friendly chitosan adhesives for plywood bonding

Xuedong Xi et al.

Summary: In this study, chitosan was used to prepare an environmentally friendly wood adhesive, with oxidized carbohydrates as hardeners to enhance bonding performance and water resistance. Thermal analysis showed that the chitosan-oxidized starch adhesive cured at a lower temperature than other adhesives, contributing to its improved bonding performance.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Preparation and characterization of a water-resistant polyamide-oxidized starch-methyl methacrylate eco-friendly wood adhesive

Mengdie Su et al.

Summary: The water-resistant P-OS-M adhesive with zero formaldehyde-emission showed superior wet shear strength compared to traditional starch and oxidized starch, with good water resistance and thermal stability, suitable for wood adhesives.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Engineering, Chemical

Preparation and characterization of formaldehyde-free wood adhesive from mangrove bark tannin

Norizaty Irman et al.

Summary: This study investigates the possibility of using tannin as a formaldehyde-free wood adhesive. Tannins extracted from Mangrove bark were modified into tanninacetone-phenol-glyoxal (TAPG) and tannin-methanol-phenol-glyoxal (TMPG) adhesives. The properties of the extracted tannins were characterized using various techniques, and the physico-chemical and mechanical properties of TAPG and TMPG adhesives were determined. Results show that both TAPG and TMPG adhesives have superior tensile strength compared to the control adhesive containing formaldehyde.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

Add to Collection

Article Engineering, Environmental

Ozone Processing of Cassava Starch

Damaris Carvalho Lima et al.

Summary: This study evaluated the ozonation of cassava starch, showing that ozonation increased the number of carbonyl and carboxyl groups while reducing large and branched molecules. These structural changes significantly influenced the pasting properties and gel texture, with ozonated starch hydrogels being 280% stronger than native starch. Additionally, the ozonated starch pastes remained consistent even at acidic conditions and were clearer than native ones.

OZONE-SCIENCE & ENGINEERING (2021)

Add to Collection

Article Chemistry, Applied

Polyethyleneimine grafted starch nanocrystals as a novel biosorbent for efficient removal of methyl blue dye

QiJie Chen et al.

Summary: In this study, a novel biosorbent SNCs-PEI was successfully prepared and exhibited good adsorption performance for the anionic dye methyl blue. The adsorption process of MB by SNCs-PEI was found to be a spontaneous and endothermic process.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Engineering, Chemical

Preparation and characterization of a melamine-urea-glyoxal resin and its modified soybean adhesive

Yufei Kan et al.

Summary: A formaldehyde-free crosslinking agent, MUG resin, was developed for soybean meal adhesive to improve bond properties, with the need to control the melamine content for stability. Melamine plays a crucial role in the adhesive properties, but excessive addition can lead to a reduction in storage time and bonding quality.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

Add to Collection

Article Engineering, Chemical

Preparation of a starch-based adhesive cross-linked with furfural, furfuryl alcohol and epoxy resin

Jun Zhang et al.

Summary: The renewable starch-furanic adhesive developed using furfural and furfuryl alcohol from agriculture as crosslinkers showed good water resistance and bonding performance. Analysis indicated that the adhesive had longer gel time, better dry shear strength, and enhanced water resistance when cross-linked with 9% epoxy resin compared to traditional adhesives.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

Add to Collection

Article Engineering, Chemical

Oxidized cornstarch - Urea wood adhesive for interior particleboard production

Salise Oktay et al.

Summary: The newly developed OCS - U based adhesive can be used in conjunction with traditional melamine urea formaldehyde resin (MUF) to produce particleboards with low formaldehyde content.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

A novel environmentally friendly hot-pressed peanut meal protein adhesive

Yang Qu et al.

Summary: The study successfully prepared a hot-pressed peanut meal protein (HPMP) adhesive with enhanced bonding strength, exceeding the standard boiling water strength requirement and improved mildew resistance. The solids content and viscosity of HPMP adhesive increased significantly, and the mechanism of bonding strength enhancement was clarified.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Chemistry, Applied

Efficient substrate accessibility of cross-linked levanase aggregates using dialdehyde starch as a macromolecular cross-linker

Noor Hidayah Abd Rahman et al.

Summary: The study focuses on improving substrate accessibility by forming cross-linked levanase aggregates (CLLAs) using a cross-linker, Dialdehyde starch-tapioca (DAST), for levan-type fructooligosaccharides (L-FOS) production. CLLAs-D and CLLAs-DB were successfully developed, with CLLAs-DB showing higher substrate affinity and accessibility, resulting in a higher total L-FOS yield compared to CLLAs-D.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Engineering, Chemical

Incorporation of chitosan into a universal adhesive system: Physicochemical characteristics, gelatinolytic activity, bond strength and interface micromorphology analyses

Rodrigo Dacoreggio et al.

Summary: The study evaluated the physicochemical characteristics of a universal adhesive system containing 0.5% chitosan and its effects on bond strength stability to dentin, dentin-restoration interface, and gelatinolytic activity. The addition of chitosan increased particle size, polydispersity index, and affected zeta potential over time. Both SE and TE strategies with chitosan showed higher collagenolytic activity compared to those without chitosan, while TE strategy had higher microtensile bond strength at 6 months.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

Add to Collection

Article Chemistry, Applied

PEG-crosslinked-chitosan hydrogel films for in situ delivery of Opuntia ficus-indica extract

O. Catanzano et al.

Summary: Chitosan-based wound dressings loaded with Opuntia ficus-indica extract were prepared in this study. The crosslinking of chitosan with low molecular weight diepoxy-poly(ethylene glycol) was confirmed, and the films showed promising characteristics for skin injury repair applications. Scratch tests on keratinocytes monolayers demonstrated the significant enhancement of cell migration in the presence of OPU-loaded samples.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Engineering, Mechanical

Stress concentration factor analysis of countersunk holes using finite element analysis and response surface methodology

Mohammad A. Gharaibeh et al.

Summary: This paper utilizes finite element analysis and response surface methodology to study the stress concentration factor of an isotropic plate with a centrally placed countersunk hole under uniaxial loading. By optimizing the model and establishing equations to analyze influencing factors, an optimal design solution is proposed.

AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Applied

A separable paper adhesive based on the starch-lignin composite

Qin Wu et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Chemistry, Physical

Mechanical properties of basalt fiber improved by starch phosphates sizing agent

Z. T. Wang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Applied

Optimization of human-like collagen composite polysaccharide hydrogel dressing preparation using response surface for burn repair

Huan Lei et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Review Chemistry, Applied

Research advances in chemical modifications of starch for hydrophobicity and its applications: A review

Xiang Wang et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Chemistry, Applied

Improved wet shear strength in eco-friendly starch-cellulosic adhesives for woody composites

Hao Yin et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Novel lignin-containing high-performance adhesive for extreme environment

Heying Zhang et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Agricultural Engineering

The preparation and performance of a novel lignin-based adhesive without formaldehyde

Xiaoyu Gong et al.

INDUSTRIAL CROPS AND PRODUCTS (2020)

Add to Collection

Article Engineering, Chemical

Improving the properties of urea-lignin-glyoxal resin as a wood adhesive by small addition of epoxy

Hamed Younesi-Kordkheili et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)

Add to Collection

Article Chemistry, Applied

Dialdehyde modified cellulose nanofibers enhanced the physical properties of decorative paper impregnated by aldehyde-free adhesive

Jianfeng Xu et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Construction & Building Technology

Modeling and optimization of mixing conditions for petroleum sludge modified bitumen using response surface methodology

Abdul Muhaimin Memon et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Chitosan used as a specific coupling agent to modify starch in preparation of adhesive film

Dehong Li et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Chemistry, Applied

Preparation and emulsification properties of dialdehyde starch nanoparticles

Yun Chen et al.

FOOD CHEMISTRY (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Preparation, characterization and properties of starch-based adhesive for wood-based panels

Yong Gu et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Materials Science, Paper & Wood

Enhancement of processability, surface, and mechanical properties of paper based on rice straw pulp using biopolymers for packaging applications

Shubhang Bhardwaj et al.

TAPPI JOURNAL (2019)

Add to Collection

Article Engineering, Chemical

Tannin-based adhesive cross-linked by furfuryl alcohol-glyoxal and epoxy resins

Jun Zhang et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2019)

Add to Collection

Article Chemistry, Applied

Environment-friendly urea-oxidized starch adhesive with zero formaldehyde-emission

Xiang-fei Zhao et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Engineering, Chemical

Double etherification of corn starch to improve its adhesion to cotton and polyester fibers

Wei Li et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Physicochemical properties of starch adhesives enhanced by esterification modification with dodecenyl succinic anhydride

Yadong Sun et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Reliability analysis of vibrating electronic assemblies using analytical solutions and response surface methodology

Mohammad A. Gharaibeh

MICROELECTRONICS RELIABILITY (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Enhancing the performance of starch-based wood adhesive by silane coupling agent(KH570)

Lei Chen et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

Add to Collection

Article Biochemistry & Molecular Biology

Preparation and characterization of dialdehyde starch by one-step acid hydrolysis and oxidation

Yingfeng Zuo et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

Add to Collection

Article Chemistry, Applied

Starch behaviors and mechanical properties of starch blend films with different plasticizers

Hoang Phuong Nguyen Vu et al.

CARBOHYDRATE POLYMERS (2016)

Add to Collection

Article Chemistry, Applied

Synthesis, characterization and hydrophobicity of silylated starch nanocrystal

Benxi Wei et al.

CARBOHYDRATE POLYMERS (2016)

Add to Collection

Article Biochemistry & Molecular Biology

Hydrophobic starch nanocrystals preparations through crosslinking modification using citric acid

Jiang Zhou et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)

Add to Collection

Article Chemistry, Applied

Preparation and properties of a starch-based wood adhesive with high bonding strength and water resistance

Yanhua Zhang et al.

CARBOHYDRATE POLYMERS (2015)

Add to Collection

Article Chemistry, Applied

Thermal degradation behavior of hypochlorite-oxidized starch nanocrystals under different oxidized levels

Benxi Wei et al.

CARBOHYDRATE POLYMERS (2015)

Add to Collection

Article Chemistry, Applied

Antioxidant activity and in vitro digestibility of dialdehyde starches as influenced by their physical and structural properties

Liming Zhang et al.

FOOD CHEMISTRY (2014)

Add to Collection

Article Chemistry, Applied

Effects of urea on freeze-thaw stability of starch-based wood adhesive

Zhenjiong Wang et al.

CARBOHYDRATE POLYMERS (2013)

Add to Collection

Article Chemistry, Applied

The preparation and properties of dialdehyde starch and thermoplastic dialdehyde starch

Jiugao Yu et al.

CARBOHYDRATE POLYMERS (2010)

Add to Collection

Article Food Science & Technology

Gelatinization and retrogradation characteristics of wheat (Rosella) starch

Masakuni Tako et al.

FOOD RESEARCH INTERNATIONAL (2008)

Add to Collection

Article Chemistry, Applied

The preparation and characterisation of a series of chemically modified potato starches

JM Fang et al.

CARBOHYDRATE POLYMERS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.