☆ 4.7 Article

Bifurcated divergent microchannel heat sinks for enhanced micro-electronic cooling

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2023)

Related references

Note: Only part of the references are listed.

Article Thermodynamics

Porous-fin microchannel heat sinks for future micro-electronics cooling

Mostafa Fathi et al.

Summary: Porous-fin microchannel heat sinks have the potential to improve the thermal and hydraulic performances of microelectronic cooling systems. However, the reduced effective thermal conductivity of porous fins compared to solid fins can negatively impact the thermal performance of the microchannel heat sinks. This research confirms that replacing solid with porous fins can simultaneously enhance the thermal and hydraulic performances of microchannel heat sinks.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2023)

Add to Collection

Article Thermodynamics

A numerical study on thermo-hydraulic performance of micro pin-fin heat sink using hybrid pin-fins arrangement for electronic cooling devices

Amir Rezazad Bari et al.

Summary: This study investigated the effect of hybrid pin-fin patterns on a heat sink's performance and studied flow characteristics such as secondary flow formation and flow-wall interaction. The findings showed that hybrid arrangements perform better than single pin-fin patterns. Case 3, in particular, exhibited the highest performance evaluation criteria with a value of 1.84 at Re = 900. The study also revealed that the instantaneous change in pattern from elliptical to hexagonal increased secondary flow and maximum velocity in the channel's cross-section.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2023)

Add to Collection

Article Thermodynamics

Investigation of double-layered wavy microchannel heatsinks utilizing porous ribs with artificial neural networks

Ozgur Bayer et al.

Summary: This study investigates the thermal performance of a double layered microchannel heatsink with wavy up-down and porous ribs. By using Computational Fluid Dynamics (CFD) and Artificial Neural Network (ANN), the best design with improved heat transfer efficiency is identified. The introduction of Dean vortices and wavy channels increases the Nusselt number and improves the thermal performance, although it also leads to an increase in pressure drop.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Thermodynamics

Gradient wick channels for enhanced flow boiling HTC and delayed CHF

Masoud Ahmadi et al.

Summary: By introducing gradient wick channels, this study delays the capillary limit, enhances boiling heat transfer coefficient, and prolongs critical heat flux. The gradient wick channel structure optimizes liquid supply and vapor escape pathways, demonstrating superior flow boiling performance.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Experimental investigations on a variable channel width double layered minichannel heat sink

Nirav Patel et al.

Summary: The development of modern electronics and communication technologies has led to compact and efficient devices, but also poses challenges such as heat generation in electronic devices. A Variable Channel Width Double Layered Minichannel Heat Sink is proposed as a solution for high heat flux dissipation and has shown improved thermal performance.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

A study on thermal characteristics of double-layered microchannel heat sink: Effects of bifurcation and flow configuration

Pankaj Srivastava et al.

Summary: A comparative study was conducted on the flow and thermal characteristics in a double-layered microchannel with bifurcation, showing that the bifurcation plates reduce the overall thermal resistance but increase pressure drop and pumping power. Nusselt number is higher in parallel-flow than counter-flow, but the difference is greater at low Re values and diminishes with increasing flow rate. Counter-flow offers a more uniform temperature distribution essential for thermal system reliability.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Add to Collection

Article Thermodynamics

Thermal performance improvement of microchannel heat sinks by utilizing variable cross-section microchannels filled with porous media

M. R. Hajmohammadi et al.

Summary: The study focuses on optimizing microchannel heat sink design by utilizing variable cross-section microchannels filled with porous media to improve thermal performance. Parametric optimization based on coolant passage widths and heights shows a positive impact on reducing pumping power. The results indicate that there is an optimum design for MCHS with a porous material, which can enhance conventional microchannel heat sinks performance significantly.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Thermodynamics

Effect of branching level on the performance of constructal theory based Y-shaped liquid cooling heat sink

Zhihao Lu et al.

APPLIED THERMAL ENGINEERING (2020)

Add to Collection

Article Thermodynamics

The shape of the elemental system in a porous medium designed for thermochemical energy storage

Alexandre Malley-Ernewein et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

Add to Collection

Article Thermodynamics

Role of flow architectures on the design of radiant cooling panels, a constructal approach

Mohamed Mosa et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

A parametric study on thermal performance of microchannel heat sinks with internally vertical bifurcations in laminar liquid flow

Han Shen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Review Green & Sustainable Science & Technology

A comprehensive review on single phase heat transfer enhancement techniques in heat exchanger applications

Tabish Alam et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Add to Collection

Article Thermodynamics

Heat rate distribution in converging and diverging microchannel in presence of conjugate effect

V. S. Duryodhan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

Add to Collection

Article Thermodynamics

Stepwise varying width microchannel cooling device for uniform wall temperature: Experimental and numerical study

Sara Riera et al.

APPLIED THERMAL ENGINEERING (2015)

Add to Collection

Article Thermodynamics

Experimental and numerical evaluation of an elongated plate-fin heat sink with three sections of stepwise varying channel width

I. K. Karathanassis et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Thermodynamics

Convective heat transfer in diverging and converging microchannels

V. S. Duryodhan et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Thermodynamics

Numerical Analysis of Constructal Water-Cooled Microchannel Heat Sinks with Multiple Bifurcations in the Entrance Region

Ruiping Zhang et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2015)

Add to Collection

Article Thermodynamics

Constructal design and thermal analysis of microchannel heat sinks with multistage bifurcations in single-phase liquid flow

Gongnan Xie et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection

Article Thermodynamics

Laminar thermal performance of microchannel heat sinks with constructal vertical Y-shaped bifurcation plates

Yanlong Li et al.

APPLIED THERMAL ENGINEERING (2014)

Add to Collection

Article Thermodynamics

A NUMERICAL STUDY OF THE THERMAL PERFORMANCE OF MICROCHANNEL HEAT SINKS WITH MULTIPLE LENGTH BIFURCATION IN LAMINAR LIQUID FLOW

Gongnan Xie et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2014)

Add to Collection

Article Thermodynamics

Experimental and numerical investigation of a multi-pass branching microchannel heat sink

Ercan M. Dede et al.

APPLIED THERMAL ENGINEERING (2013)

Add to Collection

Article Thermodynamics

Thermal performance of porous microchannel heat sink: Effects of enlarging channel outlet

Tu-Chieh Hung et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2013)

Add to Collection

Article Thermodynamics

Three-dimensional flow effects on forced convection heat transfer in a channel with stepwise-varying width

I. K. Karathanassis et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Liquid flow through a diverging microchannel

V. S. Duryodhan et al.

MICROFLUIDICS AND NANOFLUIDICS (2013)

Add to Collection

Article Thermodynamics

Numerical Analysis of Flow and Thermal Performance of Liquid-Cooling Microchannel Heat Sinks with Bifurcation

Gongnan Xie et al.

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2013)

Add to Collection

Article Thermodynamics

Optimum Nusselt Number for Simultaneously Developing Internal Flow Under Conjugate Conditions in a Square Microchannel

Manoj Kumar Moharana et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2012)

Add to Collection

Article Thermodynamics

Viscous flow in variable cross-section microchannels of arbitrary shapes

M. Akbari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2011)

Add to Collection

Review Thermodynamics

Single-phase heat transfer in microchannels: The importance of scaling effects

P. Rosa et al.

APPLIED THERMAL ENGINEERING (2009)

Add to Collection

Article Thermodynamics

Investigation of heat transfer in rectangular microchannels

PS Lee et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)

Add to Collection

Article Thermodynamics

Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink

WL Qu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.