☆ 4.7 Article

The versatile world of cellulose-based materials in healthcare: From production to applications

INDUSTRIAL CROPS AND PRODUCTS (2023)

Related references

Note: Only part of the references are listed.

Article Biochemistry & Molecular Biology

Carboxymethyl cellulose based sustainable hydrogel for colon-specific delivery of gentamicin

Ankit Verma et al.

Summary: The current research focuses on synthesizing and improving the NaCMC-cl-DMAA/AAc hydrogel and controlling the release of gentamicin in different pH environments. The hydrogel was modified using boron nitride nanosheets to enhance adsorption rate. Various analyses were conducted on the hydrogel, including FTIR, XRD, FESEM, TGA/DSC, swelling, and cell viability analysis. The results showed that the hydrogel had cytocompatibility and the drug release properties could be controlled by changing the pH environment.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

Add to Collection

Article Food Science & Technology

Effect of co-culture of Komagataeibacter nataicola and selected Lactobacillus fermentum on the production and characterization of bacterial cellulose

Huanyuan Jiang et al.

Summary: The co-culture of K. nataicola and Lactobacillus spp. strains in pre-fermented coconut water has varied effects on the production of bacterial cellulose (BC), with the co-culture of K. nataicola Q2 and L. fermentum SR showing the most effective improvement in BC production. This is achieved by affecting the formation of 13-1,4-glucan chains and crystallization of microfibrils. The co-culture system involves both direct and indirect pathways in promoting the formation of 13-1,4-glucan chains. The resulting BC membrane has higher crystallinity but lower thermal degradation, hardness, adhesiveness, and water holding capacity.

LWT-FOOD SCIENCE AND TECHNOLOGY (2023)

Add to Collection

Article Biochemistry & Molecular Biology

A Facile One-Pot Preparation and Properties of Nanocellulose-Reinforced Ionic Conductive Hydrogels

Xinmin Huang et al.

Summary: Nanocellulose-reinforced ionic conductive hydrogels were prepared using cellulose nanofiber (CNF) and polyvinyl alcohol (PVA) as raw materials in a DMSO/water binary solvent. The hydrogels exhibited high elongation at break (206%) and firmness (up to 335 KPa). They also showed good tensile strength, toughness, and elasticity. The hydrogels were assembled into a self-powered strain sensor with a high sensitivity in bend sensing testing. Addition of DMSO solvents improved the anti-freezing and water retention properties of the hydrogels.

MOLECULES (2023)

Add to Collection

Article Polymer Science

Extraction and Characterization of Fiber and Cellulose from Ethiopian Linseed Straw: Determination of Retting Period and Optimization of Multi-Step Alkaline Peroxide Process

Kibrom Feleke et al.

Summary: This study focused on extracting fiber and cellulose from linseed straw through optimization of retting time and a multi-step alkaline peroxide extraction process. The results showed that retting for 216 hours at room temperature offered adequate retting efficiency and fiber characteristics. The cellulose yield of 70% was successfully extracted using specific conditions of solvent concentration, reaction temperature, and time.

POLYMERS (2023)

Add to Collection

Review Environmental Sciences

Microalgae-Enabled Wastewater Treatment: A Sustainable Strategy for Bioremediation of Pesticides

Pei Sean Goh et al.

Summary: Pesticides are major pollutants in waterways, posing a significant threat to aquatic organisms and ecosystems. Bioremediation using microalgae to convert pesticides into harmless or less harmful compounds has become a promising strategy for pesticide treatment, offering advantages such as simultaneous wastewater treatment, nutrient recovery, and reduced toxic sludge formation.

WATER (2023)

Add to Collection

Article Biochemistry & Molecular Biology

Antibody Immobilization on Sulfated Cellulose Nanocrystals

Uma M. Nori et al.

Summary: This study reports a reaction scheme that enables both hydrolytic stability and antibody immobilization using sulfated cellulose nanocrystals. The modification of the nanocrystals was confirmed through infrared spectroscopy and thermogravimetric analysis. Both aqueous dispersions and films were tested using this general reaction scheme.

BIOMACROMOLECULES (2023)

Add to Collection

Article Engineering, Multidisciplinary

Investigation of the mechanical stability of polyethylene glycol hydrogel reinforced with cellulose nanofibrils for wound healing: Molecular dynamics simulation

Amin Koochaki et al.

Summary: Wound healing can be improved through various materials, and nanocomposites are considered promising structures for this purpose. In this study, a PEG hydrogel-cellulose nanocomposite was introduced to enhance wound healing. Molecular dynamics simulations were used to analyze the mechanical stability of the nanocomposite, showing its physical stability at standard conditions. The results demonstrated that the inclusion of cellulose into the PEG hydrogel improved its mechanical performance, making it suitable for clinical applications.

ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS (2023)

Add to Collection

Article Biochemistry & Molecular Biology

Improved production of bacterial cellulose using Gluconacetobacter sp. LYP25, a strain developed in UVC mutagenesis with limited viability conditions

Jeongho Lee et al.

Summary: By UV-induced random mutagenesis, 60 mutants of Gluconacetobacter xylinus ATCC 53524 were obtained, among which the cellulose production of LYP25 and LYP23 increased by 46.4% and 44.9% respectively. Fermentation profiling showed that LYP25 exhibited 13.8% higher glucose consumption and 41.0% higher cellulose production compared to the control strain. The physicochemical properties of LYP25-derived bacterial cellulose were similar to those of the control strain, indicating that this mutant strain has the potential to be a promising producer of bacterial cellulose in the bio-industry.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

Add to Collection

Article Multidisciplinary Sciences

Application of TOPSIS algorithm in describing bacterial cellulose-based composite hydrogel performance in incorporating methylene blue as a model drug

Touraj Amrabadi et al.

Summary: A multi-component hydrogel was developed using bacterial cellulose, alginate, and gelatin with the aid of glycerol. The physical/chemical properties of the hydrogel were characterized by FTIR, XRD, SEM, and TGA. The release characteristics of a model drug in the hydrogel were studied at different pH levels, and the preferred kinetic model was determined using TOPSIS algorithmic technique. The results showed the potential usage of the developed hydrogel in drug delivery systems.

SCIENTIFIC REPORTS (2023)

Add to Collection

Article Polymer Science

Spatial-Temporal Heterogeneity in Large Three-Dimensional Nanofibrillar Cellulose Hydrogel for Human Pluripotent Stem Cell Culture

Jin Hao et al.

Summary: One approach to cell expansion is to use large hydrogel for growing a large number of cells. Nanofibrillar cellulose (NFC) hydrogel has been used for human induced pluripotent stem cell (hiPSCs) expansion. This study aims to understand the heterogeneity of hiPSCs at the single-cell level inside large NFC hydrogel during culture, especially in terms of spatial-temporal variations in biochemical composition. The results suggest that factors such as concentration gradients of growth factors and pH changes contribute to the heterogeneity observed in protein structure, glycosylation, and pluripotency of cells cultured in NFC hydrogel.

GELS (2023)

Add to Collection

Article Biotechnology & Applied Microbiology

Effects of pullulan additive and co-culture of Aureobasidium pullulans on bacterial cellulose produced by Komagataeibacter hansenii

Hetian Hu et al.

Summary: The addition of pullulan significantly improved the mechanical properties and production of BC nanocomposites, while co-culture fermentation further enhanced the properties of BC.

BIOPROCESS AND BIOSYSTEMS ENGINEERING (2022)

Add to Collection

Review Chemistry, Applied

Bacterial cellulose-based biomaterials: From fabrication to application

Chuntao Chen et al.

Summary: This article provides a review of the research advancement and applications of BC-based biomaterials in the field of biomedicine. It includes the modifications and generation of BC-based composites using nanotechnology. The preparation methods and potential applications of these materials are summarized and discussed in detail, with a focus on important factors such as degradation and pore structure characteristic. Furthermore, the challenges and potential advances in future development are also discussed.

CARBOHYDRATE POLYMERS (2022)

Add to Collection

Review Materials Science, Textiles

Development of bacterial cellulose nanocomposites: An overview of the synthesis of bacterial cellulose nanocomposites with metallic and metallic-oxide nanoparticles by different methods and techniques for biomedical applications

Muhammad Wasim et al.

Summary: Bacterial cellulose is a material with high purity, excellent mechanical properties, high crystallinity, and water-holding capacity. Modification of bacterial cellulose with metal nanoparticles can enhance its antibacterial characteristics, making it widely used in the medical field.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

Add to Collection

Article Materials Science, Textiles

Effect of natural filler materials on fiber reinforced hybrid polymer composites: An Overview

Praveenkumara Jagadeesh et al.

Summary: Researchers have faced numerous challenges in providing environmentally friendly materials for product making. Natural fiber reinforced polymer composites are a new class of sustainable materials that offer good mechanical properties. The use of filler materials has been shown to further enhance the performance of these composites.

JOURNAL OF NATURAL FIBERS (2022)

Add to Collection

Article Multidisciplinary Sciences

Evolution of microscopic heterogeneity and dynamics in choline chloride-based deep eutectic solvents

Stephanie Spittle et al.

Summary: This article investigates the relationship between micro and macroscopic properties in deep eutectic solvents (DESs) Glyceline and Ethaline using computational and experimental techniques. The authors find that systematic addition of choline chloride leads to microscopic heterogeneities that alter structural relaxation and result in new dynamic modes strongly correlated to the macroscopic properties of the DESs formed.

NATURE COMMUNICATIONS (2022)

Add to Collection

Review Materials Science, Biomaterials

Cellulose: a fascinating biopolymer for hydrogel synthesis

Sachin Bhaladhare et al.

Summary: This review provides a comprehensive overview of the synthesis, design, properties, and applications of cellulose-based hydrogels. The high water absorption capacity and stimuli responsiveness of cellulose-based hydrogels make them promising biomaterials for various fields such as biomedical, agriculture, and flexible electronics.

JOURNAL OF MATERIALS CHEMISTRY B (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Structure of In Vitro-Synthesized Cellulose Fibrils Viewed by Cryo-Electron Tomography and 13C Natural-Abundance Dynamic Nuclear Polarization Solid-State NMR

Fabien Deligey et al.

Summary: In this study, synthesized fibers were characterized using cryo-electron tomography and dynamic nuclear polarization solid-state NMR. The results showed structural similarity between the synthesized fibers and native fibers in plant cell walls, providing insights into cell wall synthesis and contributing to the development of cellulosic materials.

BIOMACROMOLECULES (2022)

Add to Collection

Article Food Science & Technology

Applying ultrasound-assisted processing to obtain cellulose fibres from rice straw to be used as reinforcing agents

Pedro A. Freitas et al.

Summary: The ultrasound-reflux heating method is an eco-friendly way to obtain cellulose fibers with higher yield and better hydrophilicity from rice straw. These fibers show similar reinforcing capabilities, enhancing the stretchability and resistance in films. This method has industrial relevance in the food packaging field and agro-industrial waste valorization.

INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2022)

Add to Collection

Review Biochemistry & Molecular Biology

Cellulose-Based Nanomaterials Advance Biomedicine: A Review

Hani Nasser Abdelhamid et al.

Summary: This article reviews the applications of cellulose in the field of biomedicine, including antibacterial agents, antifouling, wound healing, drug delivery, tissue engineering, and bone regeneration. Cellulose-based materials possess customizable chemical, mechanical, and physical properties, making them suitable for biomedical applications.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Add to Collection

Article Engineering, Biomedical

3D-Printed composite scaffolds based on poly(ε-caprolactone) filled with poly(glutamic acid)-modified cellulose nanocrystals for improved bone tissue regeneration

Ilia Averianov et al.

Summary: This study proposes a novel personalized scaffold for bone tissue regeneration based on 3D printing technology. The scaffold demonstrates suitable mechanical properties for human trabecular bone and shows good biocompatibility and bone tissue regeneration effects through in vitro mineralization study and animal experiments.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2022)

Add to Collection

Article Dermatology

An injectable metal nanoparticle containing cellulose derivative-based hydrogels: Evaluation of antibacterial and in vitro-vivo wound healing activity in children with burn injuries

Yuming Qiu et al.

Summary: Preparing hydrogels with high antibacterial properties and good biosafety for wound healing can be challenging, but the HMC-HA/AgNPs hydrogels synthesized by introducing silver nanoparticles have shown excellent antibacterial activities and biocompatibility in experiments.

INTERNATIONAL WOUND JOURNAL (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Insight into the extraction and characterization of cellulose nanocrystals from date pits

Sara A. Wahib et al.

Summary: This study successfully extracted and characterized cellulose nanocrystals (CNCs) from date pits using mechanical stirrer and Soxhlet apparatus methods, revealing differences in morphology and structure between the two methods. The cellulose microfibrils produced through sulfuric acid hydrolysis showed a packed structure, with most lignin and hemicellulose components removed. Both methods demonstrated high CNCs yield (>10%) and method 1 was found to be less expensive than method 2 based on cost breakdown analysis for CNCs production.

ARABIAN JOURNAL OF CHEMISTRY (2022)

Add to Collection

Article Polymer Science

Biopolymer: A Sustainable Material for Food and Medical Applications

Jaya Baranwal et al.

Summary: Biopolymers are highly valuable functional materials that attract researchers and professionals from various disciplines. Interdisciplinary research is crucial to explore the fundamental and applied aspects of biopolymers in addressing complex problems related to health and well-being. Efforts have been made to replace synthetic polymers with biodegradable materials derived from natural resources to reduce environmental impact. This review focuses on the diverse applications of biopolymers in the food and medical industry and provides an outlook for the future of this industry.

POLYMERS (2022)

Add to Collection

Article Microbiology

Characterization of Bacterial Cellulose Produced by Komagataeibacter maltaceti P285 Isolated from Contaminated Honey Wine

Narumol Thongwai et al.

Summary: Bacterial strain P285, isolated from contaminated honey wine in a honey factory, has a high potential for BC production, especially when grown in high initial media pH.

MICROORGANISMS (2022)

Add to Collection

Article Agricultural Engineering

Cellulosic fibres-based epoxy composites: From bioresources to a circular economy

Neha Uppal et al.

Summary: This review provides insights into the use of bio-based fibers as reinforcement in polymer matrix composites, specifically focusing on their effect on the tensile characteristics of epoxy composites. While previous studies have mainly focused on improving the strength of the composites, there is limited scientific knowledge regarding modulus and its reinforcing capabilities. Further research is needed to understand the impact of dense regions with high moduli, less dense regions with insignificant moduli, and point-to-point variation in the matrix.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Agricultural Engineering

Coproduction of exopolysaccharide and polyhydroxyalkanoates from Sphingobium yanoikuyae BBL01 using biochar pretreated plant biomass hydrolysate

Shashi Kant Bhatia et al.

Summary: Sphingobium yanoikuyae BBL01 can produce exopolysaccharides (EPS) and polyhydroxyalkanoates (PHAs). Side products from pre-treatment of biomass have varying effects on the growth, EPS production, and PHB accumulation of S. yanoikuyae BBL01. Optimal concentrations of these side products can improve the growth and production of the bacteria. Different C/N ratios can favor the production of EPS or the accumulation of PHB. Detoxified pine biomass hydrolysate promotes the co-production of EPS and PHB.

BIORESOURCE TECHNOLOGY (2022)

Add to Collection

Review Agricultural Engineering

A critical review on biomass-based sustainable biorefineries using nanobiocatalysts: Opportunities, challenges, and future perspectives

Rijuta Ganesh Saratale et al.

Summary: Biocatalysts, including live microbial cells/enzymes, have been recognized as a predominant tool for biomass conversion. The use of nanobiocatalysts with different nano-supports can overcome stability and reusability issues, making biomass-based biorefinery profitable and sustainable. This review provides a comprehensive analysis of nanobiocatalyst systems and discusses their applications in waste biomass conversion and commercialization.

BIORESOURCE TECHNOLOGY (2022)

Add to Collection

Article Agricultural Engineering

Lignocellulosic hydrolysate based biorefinery for marine exopolysaccharide production and application of the produced biopolymer in environmental clean-up

Ranjit Gurav et al.

Summary: This study investigated the utilization of lignocellulosic hydrolysate-based carbon source for exopolysaccharide (EPS) production using a marine bacterium, Echinicola sediminis BBL-M-12. The bacterium showed different EPS production and composition when different carbon sources were supplied, and exhibited excellent environmental applications.

BIORESOURCE TECHNOLOGY (2022)

Add to Collection

Article Agricultural Engineering

Cellulose/polyaniline hybrid nanocomposites: Design, fabrication, and emerging multidimensional applications

Ashvinder K. Rana et al.

Summary: Polyaniline, a special class of intrinsic conducting polymers, has potential applications in various fields. By blending with biomaterials like cellulose, the degradation rate and processibility of polyaniline can be improved. These biodegradable and environmentally friendly conducting polymers have significant potential in water treatment, electronic devices, and biomedical applications.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Nanocellulose for Paper and Textile Coating: The Importance of Surface Chemistry

Laura Spagnuolo et al.

Summary: Nanocellulose has garnered immense scientific interest due to its abundance, easy manufacturing process, biodegradability, and low cost. Cellulose nanocrystals and cellulose nanofibers are ideal alternatives to plastic coatings in the textile and paper industry. Their ability to form a network held together by hydrogen bonds allows nanocelluloses to greatly strengthen cellulose and other fiber-based materials. In addition, their use enables greener application processes, such as water deposition.

CHEMPLUSCHEM (2022)

Add to Collection

Article Polymer Science

Drug Delivery System Based on Carboxymethyl Cellulose Containing Metal-Organic Framework and Its Evaluation for Antibacterial Activity

Fatimah A. T. Alsaaed et al.

Summary: A novel drug delivery system based on carboxymethyl cellulose containing copper oxide and zinc oxide was prepared and characterized. The system demonstrated a high activity index against S. aureus and E. coli.

POLYMERS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Extraction of Cellulose from Sugarcane Bagasse Optimization and Characterization

Getu T. Melesse et al.

Summary: Cellulose was extracted from sugarcane bagasse through a five-step treatment and optimized for the highest yield and composition. The remaining lignin was removed by a solution treatment, and the morphology, thermal properties, and crystallinity of the cellulose were analyzed.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Extraction of cellulose nanocrystals from agricultural by-products: a review

Kilole Tesfaye Chaka

Summary: In recent studies, the reuse, recycle, and recovery of biomass wastes for high value-added bioproducts have gained significant attention. This review provides a brief overview of the extraction of cellulose nanocrystals (CNCs) from various agricultural wastes and discusses the advantages and disadvantages of common extraction methods. CNCs have been widely used in high-performance materials due to their lightweight, excellent mechanical strength, biocompatibility, biodegradability, renewability, high surface area, and tunable surface chemistry. The review also discusses the challenges in CNCs production, limitations in physicochemical properties and applications, and future prospects of CNCs.

GREEN CHEMISTRY LETTERS AND REVIEWS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Isolation and Properties of Cellulose Nanocrystals Fabricated by Ammonium Persulfate Oxidation from Sansevieria trifasciata Fibers

Nafiis Lazuardi Indirasetyo et al.

Summary: Cellulose nanocrystals (CNCs) were successfully prepared from Sansevieria trifasciata fibers (STFs) using ammonium persulfate (APS) oxidation. The optimum conditions for maximum crystallinity were found to be an oxidation temperature of 70 degrees C, a reaction time of 16 h, and an APS concentration of 1.5 M. The CNCs showed potential as nanocomposite reinforcement materials.

FIBERS (2022)

Add to Collection

Article Polymer Science

Extraction and Characterization of Cellulose from Agricultural By-Products of Chiang Rai Province, Thailand

Orapan Romruen et al.

Summary: This study investigated the cellulose extracted from rice straw, corncob, Phulae pineapple leaves, and Phulae pineapple peels through alkaline extraction and bleaching processes. The highest extraction yield and lowest undesired components were found in the alkaline-extracted cellulose from corncob samples. Microstructure and thermal analysis showed that the alkaline-extracted corncob cellulose had similar properties to commercial cellulose, with higher thermal stability and crystallinity index.

POLYMERS (2022)

Add to Collection

Review Environmental Sciences

Wastewater based microalgal biorefinery for bioenergy production: Progress and challenges

Shashi Kant Bhatia et al.

Summary: Treatment of industrial and domestic wastewater is crucial for protecting health and meeting freshwater demand. Microalgae-based technology offers a feasible solution for resource recovery from wastewater, but faces various challenges.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Chemistry, Applied

Natural acidic deep eutectic solvent to obtain cellulose nanocrystals using the design of experience approach

L. Douard et al.

Summary: This study successfully optimized the extraction of cellulose nanocrystals using acidic natural deep eutectic solvents through design of experiment method. The mathematical model accurately described the crystallinity, while the prediction for CNC yield was more of a tendency. The experimental results confirmed the effectiveness of the predictive models.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Chemistry, Applied

Dual-drug delivery system based on the hydrogels of alginate and sodium carboxymethyl cellulose for colorectal cancer treatment

Yanshan Sheng et al.

Summary: A dual-drug delivery system is proposed for improving chemotherapy efficacy and relieving pain associated with colorectal cancer. This system utilizes hydrogels to protect drugs and achieve dual pH-responsive drug delivery. The findings have significant implications for medical science and pharmaceutics.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Comprehensive review on plant fiber-reinforced polymeric biocomposites

Sakil Mahmud et al.

Summary: The expansion of environment-friendly materials based on natural sources, particularly plant-based natural fibers in reinforced polymer composite materials, has drawn significant interest from manufacturers. Plant fiber-based materials are widely used in construction, automotive, packaging, sports, biomedical, and defense sectors due to their superior characteristics.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Agricultural Engineering

Adding value to poly (butylene succinate) and nanofibrillated cellulose-based sustainable nanocomposites by applying masterbatch process

Oskars Platnieks et al.

Summary: The study demonstrates the beneficial effects of premixing highly loaded poly (butylene succinate) (PBS) / nanofibrillated cellulose (NFC) nanocomposites under solution conditions and using them as a masterbatch for melt blending. The masterbatch process significantly reduces solvent usage and improves NFC dispersion in the polymer matrix. Samples processed with the masterbatch show enhanced overall mechanical properties compared to conventional solvent casting, indicating a high potential for high-performance materials.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Review Materials Science, Paper & Wood

Cellulose and its derivatives: towards biomedical applications

Hadi Seddiqi et al.

Summary: Cellulose, the most abundant polysaccharide on Earth, can be sourced from various natural materials such as wood, plants, bacteria, algae, and tunicates. This review provides an extensive survey on cellulose and its derivatives, highlighting recent developments in preparation methods for novel properties beneficial for biomedical applications. Despite cellulose's potential for various fields, its extensive use has mainly been limited to industry, prompting a focus on recent advancements for biomedical applications.

CELLULOSE (2021)

Add to Collection

Review Polymer Science

Recent Advances and Applications of Bacterial Cellulose in Biomedicine

Sam Swingler et al.

Summary: Bacterial cellulose produced by Komagateibacter xylinus has unique properties such as high chemical purity, nano-fibrillar matrix, and crystallinity, making it a promising candidate for various applications including biomedical, potable treatment, nano-filters, and functional applications. Its superior performance compared to other natural or synthetic analogues is attributed to these distinct characteristics, making it an ideal subject for further scientific research in biopolymer development.

POLYMERS (2021)

Add to Collection

Review Polymer Science

Insights on Cellulose Research in the Last Two Decades in Romania

Sergiu Coseri

Summary: Cellulose has clear advantages over synthetic fibers in the current global context, with great potential to substitute polluting fossil-based materials harmful to ecosystems. Research in cellulose is mainly aimed at industrial needs worldwide, with Romanian researchers making contributions in cellulose characterization and functionalization, as well as the applications of cellulose-based materials.

POLYMERS (2021)

Add to Collection

Article Chemistry, Analytical

Electrical Characterization of Cellulose-Based Membranes towards Pathogen Detection in Water

Gregoire Le Brun et al.

Summary: This paper explores the potential of using paper-based substrates combined with electrical detection for bacterial detection, demonstrating the feasibility and effectiveness of detecting bacteria in a simple setup. The approach offers high practicality and applicability, especially in fields requiring frequent testing such as water quality monitoring.

BIOSENSORS-BASEL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Carboxymethyl Cellulose, Pluronic, and Pullulan-Based Compositions Efficiently Enhance Antiadhesion and Tissue Regeneration Properties without Using Any Drug Molecules

Jeong Man An et al.

Summary: This study developed biocompatible and biodegradable antiadhesion agents with excellent physical characteristics and stability, showing high effectiveness in preventing postlaparotomy adhesion; in SD rat experiments, they were more effective than the traditional Medicurtain, demonstrating great potential in reducing complications during clinical surgeries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Applied

Enhanced crystallinity and thermal properties of cellulose from rice husk using acid hydrolysis treatment

Halimatun Saadiah Hafid et al.

Summary: Cellulose was extracted from rice husk using an integrated delignification process involving alkaline treatment and acid hydrolysis. HNO3 treatment increased cellulose content and crystallinity, with slightly improved thermal properties. Economic analysis showed chlorine extraction yielded higher cellulose recovery but lower total operation costs compared to HNO3.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Polymer Science

Characterizing Bacterial Cellulose Produced byKomagataeibacter sucrofermentans H-110 on Molasses Medium and Obtaining a Biocomposite Based on It for the Adsorption of Fluoride

Viktor V. Revin et al.

Summary: This study aimed to obtain a biocomposite material with adsorption properties for fluoride ions based on bacterial cellulose using a highly productive strain on molasses medium. The results showed that the new material has high sorption ability for fluoride ions in water.

POLYMERS (2021)

Add to Collection

Review Chemistry, Applied

Nanocellulose and microcrystalline cellulose from agricultural waste: Review on isolation and application as reinforcement in polymeric matrices

Sagnite Ventura-Cruz et al.

Summary: This article reviews the characteristics of nanocellulose and microcrystalline cellulose extracted from lignocellulosic residues, along with the main extraction methods and their contributions to the properties of composite films.

FOOD HYDROCOLLOIDS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

A new biodegradable nano cellulose-based drug delivery system for pH-controlled delivery of curcumin

T. S. Anirudhan et al.

Summary: The study prepared a nano cellulose-based drug delivery system for effective delivery of curcumin, showing high drug loading capacity and maximum drug release at specific pH levels. In vitro studies demonstrated cytotoxicity towards cancer cells, and further investigations suggest its potential application for targeted delivery and controlled release of CUR in cancer treatment.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Review Biochemistry & Molecular Biology

Cellulose nanocrystals: Pretreatments, preparation strategies, and surface functionalization

Ashvinder Kumar Rana et al.

Summary: Cellulose nanocrystals (CNCs) are highly favored by researchers for their unique physicochemical properties and wide range of applications. Ongoing advancements in extraction and surface modification techniques aim to meet the expanding demand for CNCs-based materials. Research focuses on properties, extraction methods, and different surface modification techniques to fulfill the needs of producers.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Simultaneous surface functionalization and drug loading: A novel method for fabrication of cellulose nanocrystals-based pH responsive drug delivery system

Wei Long et al.

Summary: A novel strategy for surface functionalization and drug loading of cellulose nanocrystals through hydrazone bonds was reported. The drug carriers showed negative cytotoxicity and desirable anticancer effects, making this method simple and effective for simultaneous surface functionalization and drug loading.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Microbial fuel cells for remediation of environmental pollutants and value addition: Special focus on coupling diatom microbial fuel cells with photocatalytic and photoelectric fuel cells

Vandana Vinayak et al.

Summary: With the rise in anthropogenic pollution, especially in water, there is potential in using microbes and algae for remediation of pollutants. Coupling microbial fuel cells with photocatalytic and photoelectric fuel cells has the potential to improve power output and efficiently clean the environment.

JOURNAL OF BIOTECHNOLOGY (2021)

Add to Collection

Review Biotechnology & Applied Microbiology

Emerging prospects of macro- and microalgae as prebiotic

Anil Kumar Patel et al.

Summary: Algae-based foods are gaining popularity due to their high nutritional value, with polysaccharides being a particularly promising fraction that can act as potential prebiotics. Algae are not only recognized as prominent protein sources, but also as sources of bioactive compounds with various health benefits, making them potentially valuable in developing an algal-based food industry.

MICROBIAL CELL FACTORIES (2021)

Add to Collection

Review Plant Sciences

Microalgal nanocellulose - opportunities for a circular bioeconomy

Ian L. Ross et al.

Summary: Over 3 billion years, photosynthetic algae have evolved complex uses for cellulose, the most abundant polymer worldwide. Cellulose can be processed to nanocellulose, a promising nanomaterial with novel properties. Microalgae as a source of nanocellulose show potential for sustainable nanomaterials with diverse applications.

TRENDS IN PLANT SCIENCE (2021)

Add to Collection

Article Polymer Science

Structural Characterisation and Assessment of the Novel Bacillus amyloliquefaciens RK3 Exopolysaccharide on the Improvement of Cognitive Function in Alzheimer's Disease Mice

Ravi Gangalla et al.

Summary: The study isolated Bacillus amyloliquefaciens RK3 from a contaminated soil, which was then used to generate a potential polysaccharide with anti-Alzheimer's activity. The purified polysaccharide significantly impacted plaques formed by amyloid proteins during Alzheimer's disease, indicating its potential for various industrial and pharmaceutical applications.

POLYMERS (2021)

Add to Collection

Review Biotechnology & Applied Microbiology

Algal cellulose, production and potential use in plastics: Challenges and opportunities

Enio Zanchetta et al.

Summary: The development of new biodegradable plastic materials from renewable sources is a major challenge for plastic industries to provide sustainable alternatives to petroleum plastic. This review focuses on summarizing the current state of bioplastic production, particularly on algal cellulose and its derivatives for bioplastic applications. Despite the potential of algae as a feedstock for nanocellulose, further research and optimization are needed in terms of cellulose content and downstream processing.

ALGAL RESEARCH-BIOMASS BIOFUELS AND BIOPRODUCTS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Production of Microfibrillated Cellulose from Fast-Growing Poplar and Olive Tree Pruning by Physical Pretreatment

David Ibarra et al.

Summary: This study focuses on producing microfibrillated cellulose from fast-growing poplar and olive tree pruning using physical pretreatment before the microfibrillation stage. Both raw materials yielded microfibrillated cellulose with properties comparable to that obtained from commercial industrial eucalypt pulp, generating films with high mechanical properties and low wettability. Various applications for cellulose microfibers suspensions and films are discussed based on these properties.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Review Materials Science, Paper & Wood

RECENT APPLICATIONS AND INNOVATIONS OF CELLULOSE BASED MATERIALS: A CRITICAL REVIEW

Tshwafo Elias Motaung

Summary: Cellulose materials have a wide range of applications in various fields, with the potential to replace synthetic fibers and fossil-based materials. Its key applications revolve around the balance of hydrophilicity, mechanical properties, and optical properties.

CELLULOSE CHEMISTRY AND TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Flexible bacterial cellulose-based BC-SiO2-TiO2-Ag membranes with self-cleaning, photocatalytic, antibacterial and UV-shielding properties as a potential multifunctional material for combating infections and environmental applications

Kifayat U. Rahman et al.

Summary: This research study successfully developed flexible and multifunctional organic-inorganic hybrid membranes based on bacterial cellulose with photocatalytic, self-cleaning, and antibacterial properties. These membranes showed excellent photocatalytic/self-cleaning activity towards dye and reasonable antibacterial activity against bacteria, demonstrating potential applications in self-cleaning and antibacterial surfaces.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Ultrahigh-cell-density heterotrophic cultivation of the unicellular green microalga Scenedesmus acuminatus and application of the cells to photoautotrophic culture enhance biomass and lipid production

Hu Jin et al.

BIOTECHNOLOGY AND BIOENGINEERING (2020)

Add to Collection

Article Materials Science, Paper & Wood

Cellulosic material obtained from Antarctic algae biomass

Oscar G. Paniz et al.

CELLULOSE (2020)

Add to Collection

Article Engineering, Chemical

Isolation of Cellulose from Wheat Straw Using Alkaline Hydrogen Peroxide and Acidified Sodium Chlorite Treatments: Comparison of Yield and Properties

Umair Qasim et al.

ADVANCES IN POLYMER TECHNOLOGY (2020)

Add to Collection

Review Agricultural Engineering

Recent developments in pretreatment technologies on lignocellulosic biomass: Effect of key parameters, technological improvements, and challenges

Shashi Kant Bhatia et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Review Chemistry, Applied

High-performance modified cellulose paper-based biosensors for medical diagnostics and early cancer screening: A concise review

Katarzyna Ratajczak et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Materials Science, Paper & Wood

Cellulose from the green macroalgae Ulva lactuca: isolation, characterization, optotracing, and production of cellulose nanofibrils

Niklas Wahlstrom et al.

CELLULOSE (2020)

Add to Collection

Article Engineering, Environmental

A technology for pilot production of bacterial cellulose from oat hulls

Ekaterina A. Skiba et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Photoprotection capacity of microalgae improved by regulating the antenna size of light-harvesting complexes

Guang-Rong Hu et al.

JOURNAL OF APPLIED PHYCOLOGY (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Highly Loaded Cellulose/Poly (butylene succinate) Sustainable Composites for Woody-Like Advanced Materials Application

Oskars Platnieks et al.

MOLECULES (2020)

Add to Collection

Article Multidisciplinary Sciences

Primary cell wall inspired micro containers as a step towards a synthetic plant cell

T. Paulraj et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Paper & Wood

Characterization of blended cellulose/biopolymer films prepared using ionic liquid

Saerom Park et al.

CELLULOSE (2020)

Add to Collection

Article Polymer Science

Fast Production of Cellulose Nanocrystals by Hydrolytic-Oxidative Microwave-Assisted Treatment

Luana Amoroso et al.

POLYMERS (2020)

Add to Collection

Article Microscopy

Fluorescence visualization of cellulose and pectin in the primary plant cell wall

A. J. Bidhendi et al.

JOURNAL OF MICROSCOPY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Surface Modification of Bacterial Cellulose by Copper and Zinc Oxide Sputter Coating for UV-Resistance/Antistatic/Antibacterial Characteristics

Muhammad Wasim et al.

COATINGS (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Sugar-cane bagasse cellulose-based scaffolds promote multi-cellular interactions, angiogenesis and reduce inflammation for skin tissue regeneration

Honita Ramphul et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Review Biochemistry & Molecular Biology

A comprehensive review on chemical properties and applications of biopolymers and their composites

Ashish George et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Review Chemistry, Analytical

Recent Advances in Cellulose-Based Biosensors for Medical Diagnosis

Samir Kamel et al.

BIOSENSORS-BASEL (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Production of bacterial cellulose from alternative cheap and waste resources: A step for cost reduction with positive environmental aspects

Mazhar Ul-Islam et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Optimized culture conditions for bacterial cellulose production byAcetobacter senegalensisMA1

K. Aswini et al.

BMC BIOTECHNOLOGY (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Fabrication of Bacterial Cellulose-Curcumin Nanocomposite as a Novel Dressing for Partial Thickness Skin Burn

Wasim Sajjad et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

Add to Collection

Review Biochemistry & Molecular Biology

Carboxymethyl cellulose-based materials for infection control and wound healing: A review

Vimala Kanikireddy et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Materials Science, Paper & Wood

Effects of Cellulose Nanocrystals as Extender on Physical and Mechanical Properties of Wood Cement Composite Panels

Mona Shayestehkia et al.

BIORESOURCES (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Porous Silk Fibroin/Cellulose Hydrogels for Bone Tissue Engineering via a Novel Combined Process Based on Sequential Regeneration and Porogen Leaching

Dennis Burger et al.

MOLECULES (2020)

Add to Collection

Proceedings Paper Biochemistry & Molecular Biology

Cellulose extraction from sugar palm (Arenga pinnata) fibre by alkaline and peroxide treatments

N. E. Fitriana et al.

3RD INTERNATIONAL CONFERENCE ON NATURAL PRODUCTS AND BIORESOURCE SCIENCES (2020)

Add to Collection

Article Chemistry, Applied

Hybrid cellulose nanocrystal/magnetite glucose biosensors

Chantal T. Tracey et al.

CARBOHYDRATE POLYMERS (2020)

Add to Collection

Article Chemistry, Applied

Green synthesis of cellulose nanofibers using immobilized cellulase

Mohamed A. Yassin et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Review Chemistry, Applied

A comprehensive review of techniques for natural fibers as reinforcement in composites: Preparation, processing and characterization

M. R. Sanjay et al.

CARBOHYDRATE POLYMERS (2019)

Add to Collection

Review Chemistry, Multidisciplinary

Versatile Application of Nanocellulose: From Industry to Skin Tissue Engineering and Wound Healing

Lucie Bacakova et al.

NANOMATERIALS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Inorganic Salts Induce Thermally Reversible and Anti-Freezing Cellulose Hydrogels

Xiong-Fei Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Add to Collection

Review Materials Science, Paper & Wood

Production of bacterial cellulose from industrial wastes: a review

Zohaib Hussain et al.

CELLULOSE (2019)

Add to Collection

Article Biophysics

Entrapment of bacterial cellulose nanocrystals stabilized Pickering emulsions droplets in alginate beads for hydrophobic drug delivery

Huiqiong Yan et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2019)

Add to Collection

Article Biophysics

Smart graphene-cellulose paper for 2D or 3D origami-inspired human stem cell support and differentiation

Jianfeng Li et al.

COLLOIDS AND SURFACES B-BIOINTERFACES (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Titanium oxide-bacterial cellulose bioadsorbent for the removal of lead ions from aqueous solution

Annum Shoukat et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Engineering, Biomedical

Fabrication and characterization of novel bacterial cellulose/alginate/gelatin biocomposite film

Nadda Chiaoprakobkij et al.

JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2019)

Add to Collection

Article Polymer Science

Estimation of Aspect Ratio of Cellulose Nanocrystals by Viscosity Measurement: Influence of Aspect Ratio Distribution and Ionic Strength

Qiang Wu et al.

POLYMERS (2019)

Add to Collection

Article Biochemistry & Molecular Biology

Microcrystalline cellulose from Posidonia oceanica brown algae: Extraction and characterization

Ahmed Fouzi Tarchoun et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Materials Science, Biomaterials

Nanocrystalline cellulose decorated quantum dots based tyrosinase biosensor for phenol determination

Fariza Aina Abd Manan et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Molecular Threading-Dependent Mass Transport in Paper Origami for Single-Step Electrochemical DNA Sensors

Dekai Ye et al.

NANO LETTERS (2019)

Add to Collection

Article Polymer Science

Theoretical study and experimental verification of a novel conjugated and coplanar HPBO polymers with hydrogen bond structure

Jianting Zhang et al.

POLYMER (2019)

Add to Collection

Article Polymer Science

Cellulose fiber-reinforced thermosetting composites: impact of cyanoethyl modification on mechanical, thermal and morphological properties

Md Rezaur Rahman et al.

POLYMER BULLETIN (2019)

Add to Collection

Article Optics

Cadmium oxide/TEMPO-oxidized cellulose nanocomposites produced by pulsed laser ablation in liquid environment: Synthesis, characterization, and antimicrobial activity

Eman A. Mwafy et al.

OPTICS AND LASER TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Paper & Wood

Potential Use of Green Alga Ulva sp. for Papermaking

Ana Moral et al.

BIORESOURCES (2019)

Add to Collection

Review Biochemistry & Molecular Biology

Potential and Limitations of Nanocelluloses as Components in Biocomposite Inks for Three-Dimensional Bioprinting and for Biomedical Devices

Gary Chinga-Carrasco

BIOMACROMOLECULES (2018)

Add to Collection

Article Chemistry, Applied

A new method to produce cellulose nanofibrils from microalgae and the measurement of their mechanical strength

Hyun-Ro Lee et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Chemistry, Applied

Use of heparinized bacterial cellulose based scaffold for improving angiogenesis in tissue regeneration

Baoxiu Wang et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Polymer Science

Carboxymethyl cellulose-based superabsorbent hydrogels containing carboxymehtyl beta-cyclodextrin for enhanced mechanical strength and effective drug delivery

Daham Jeong et al.

EUROPEAN POLYMER JOURNAL (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Nano-biocomposite scaffolds of chitosan, carboxymethyl cellulose and silver nanoparticle modified cellulose nanowhiskers for bone tissue engineering applications

Abshar Hasan et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Nanocellulose as a natural source for groundbreaking applications in materials science: Today's state

Dieter Klemm et al.

MATERIALS TODAY (2018)

Add to Collection

Review Chemistry, Multidisciplinary

Importance of Agricultural and Industrial Waste in the Field of Nanocellulose and Recent Industrial Developments of Wood Based Nanocellulose: A Review

Malladi Rajinipriya et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2018)

Add to Collection

Article Materials Science, Biomaterials

Eu/Tb luminescence for alkaline phosphatase and beta-galactosidase assay in hydrogels and on paper devices

Tumpa Gorai et al.

JOURNAL OF MATERIALS CHEMISTRY B (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Bacterial Cellulose as a Supersoft Neural Interfacing Substrate

Junchuan Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Review Biotechnology & Applied Microbiology

Lignin-carbohydrate complexes: properties, applications, analyses, and methods of extraction: a review

Dmitry Tarasov et al.

BIOTECHNOLOGY FOR BIOFUELS (2018)

Add to Collection

Article Biochemistry & Molecular Biology

Synthesis and characterization of cellulose nanofibers (CNF) ramie reinforced cassava starch hybrid composites

Edi Syafri et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Ultrasonic Irradiation Coupled with Microwave Treatment for Eco-friendly Process of Isolating Bacterial Cellulose Nanocrystals

Endarto Yudo Wardhono et al.

NANOMATERIALS (2018)

Add to Collection

Article Energy & Fuels

Nanocellulose: Extraction and application

Patchiya Phanthong et al.

CARBON RESOURCES CONVERSION (2018)

Add to Collection

Article Biotechnology & Applied Microbiology

Recombinant biosynthesis of bacterial cellulose in genetically modified Escherichia coli

Gizem Buldum et al.

BIOPROCESS AND BIOSYSTEMS ENGINEERING (2018)

Add to Collection

Review Engineering, Chemical

Spinning of Cellulose Nanofibrils into Filaments: A Review

Meri J. Lundahl et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)

Add to Collection

Article Biotechnology & Applied Microbiology

Ratiometric fluorescent L-arginine and L-asparagine biosensors based on the oxazine 170 perchlorate-ethyl cellulose membrane

Kido An et al.

ENGINEERING IN LIFE SCIENCES (2017)

Add to Collection

Article Agricultural Engineering

The isolation of cellulose nanocrystals from pistachio shells via acid hydrolysis

Josh Marett et al.

INDUSTRIAL CROPS AND PRODUCTS (2017)

Add to Collection

Review Biochemistry & Molecular Biology

Bacterial cellulose in biomedical applications: A review

Guilherme Fadel Picheth et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

Add to Collection

Review Chemistry, Multidisciplinary

Recent progress in cellulose nanocrystals: sources and production

Djalal Trache et al.

NANOSCALE (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Bacterial cellulose-TiO2 nanocomposites promote healing and tissue regeneration in burn mice model

Ayesha Khalid et al.

RSC ADVANCES (2017)

Add to Collection

Article Multidisciplinary Sciences

Transcriptional Regulation of Cellulose Biosynthesis during the Early Phase of Nitrogen Deprivation in Nannochloropsis salina

Seok Won Jeong et al.

SCIENTIFIC REPORTS (2017)

Add to Collection

Article Biotechnology & Applied Microbiology

Genetic engineering of the Calvin cycle toward enhanced photosynthetic CO2 fixation in microalgae

Bo Yang et al.

BIOTECHNOLOGY FOR BIOFUELS (2017)

Add to Collection

Review Materials Science, Paper & Wood

Glucose, not cellobiose, is the repeating unit of cellulose and why that is important

Alfred D. French

CELLULOSE (2017)

Add to Collection

Review Biotechnology & Applied Microbiology

Tissue engineering Approaches in the Design of Healthy and Pathological In Vitro Tissue Models

Silvia Caddeo et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

High Dielectric Performances of Flexible and Transparent Cellulose Hybrid Films Controlled by Multidimensional Metal Nanostructures

Sangyoon Ji et al.

ADVANCED MATERIALS (2017)

Add to Collection

Article Chemistry, Medicinal

Isolation and Structural Characterization of Cellulose from Arctic Brown Algae

K. G. Bogolitsyn et al.

CHEMISTRY OF NATURAL COMPOUNDS (2017)

Add to Collection

Article Agricultural Engineering

Green synthesis of bacterial cellulose via acetic acid pre-hydrolysis liquor of agricultural corn stalk used as carbon source

Zheng Cheng et al.

BIORESOURCE TECHNOLOGY (2017)

Add to Collection

Review Chemistry, Physical

Review of Hydrogels and Aerogels Containing Nanocellulose

Kevin J. De France et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Reduced Graphene Oxide/Alumina, A Good Accelerant for Cellulose-Based Artificial Nacre with Excellent Mechanical, Barrier, and Conductive Properties

Kiran Shahzadi et al.

ACS NANO (2017)

Add to Collection

Article Engineering, Environmental

Synthesis of mechanically stiff and bioactive hybrid hydrogels for bone tissue engineering applications

Anuj Kumar et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Chitin Fibers with Aligned Nanofibrillar Architectures: A Nonwoven-Mat Separator for Lithium Metal Batteries

Joong-Kwon Kim et al.

ACS NANO (2017)

Add to Collection

Article Chemistry, Applied

Bacterial cellulose-zinc oxide nanocomposites as a novel dressing system for burn wounds

Ayesha Khalid et al.

CARBOHYDRATE POLYMERS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Cellulose Nanofibers from Softwood, Hardwood, and Tunicate: Preparation-Structure-Film Performance Interrelation

Yadong Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Extreme Light Management in Mesoporous Wood Cellulose Paper for Optoelectronics

Hongli Zhu et al.

ACS NANO (2016)

Add to Collection

Article Materials Science, Paper & Wood

A comparison of cellulose nanofibrils produced from Cladophora glomerata algae and bleached eucalyptus pulp

Zhouyang Xiang et al.

CELLULOSE (2016)

Add to Collection

Article

Physicochemical analysis of cellulose from microalgae Nannochloropsis gaditana

HAMED Samia BABA et al.

AFRICAN JOURNAL OF BIOTECHNOLOGY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Paper-Based Electrical Respiration Sensor

Firat Gueder et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Article Biochemistry & Molecular Biology

Cellulose Structural Polymorphism in Plant Primary Cell Walls Investigated by High-Field 2D Solid-State NMR Spectroscopy and Density Functional Theory Calculations

Tuo Wang et al.

BIOMACROMOLECULES (2016)

Add to Collection

Article Agricultural Engineering

Optimization study on the hydrogen peroxide pretreatment and production of bioethanol from seaweed Ulva prolifera biomass

Yinping Li et al.

BIORESOURCE TECHNOLOGY (2016)

Add to Collection

Review Agricultural Engineering

The role of pretreatment in improving the enzymatic hydrolysis of lignocellulosic materials

Shaoni Sun et al.

BIORESOURCE TECHNOLOGY (2016)

Add to Collection

Article Biophysics

Paper-based α-amylase detector for point-of-care diagnostics

Satarupa Dutta et al.

BIOSENSORS & BIOELECTRONICS (2016)

Add to Collection

Article Chemistry, Applied

Production of new cellulose nanomaterial from red algae marine biomass Gelidium elegans

You Wei Chen et al.

CARBOHYDRATE POLYMERS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Chemically-modified cellulose paper as smart sensor device for colorimetric and optical detection of hydrogen sulfate in water

Jordi Rull-Barrull et al.

CHEMICAL COMMUNICATIONS (2016)

Add to Collection

Article Chemistry, Physical

Millisecond Pulsed Films Unify the Mechanisms of Cellulose Fragmentation

Christoph Krumm et al.

CHEMISTRY OF MATERIALS (2016)

Add to Collection

Review Chemistry, Multidisciplinary

Hydrogels based on cellulose and chitin: fabrication, properties, and applications

Xiaoping Shen et al.

GREEN CHEMISTRY (2016)

Add to Collection

Review Biochemistry & Molecular Biology

Microcrystalline cellulose: Isolation, characterization and bio-composites application-A review

Djalal Trache et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Using Commercial Enzymes to Produce Cellulose Nanofibers from Soybean Straw

Milena Martelli-Tosi et al.

JOURNAL OF NANOMATERIALS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Comprehensive morphological and structural investigation of cellulose I and II nanocrystals prepared by sulphuric acid hydrolysis

Wilson Pires Flauzino Neto et al.

RSC ADVANCES (2016)

Add to Collection

Article Multidisciplinary Sciences

Bacterial cellulose synthesis mechanism of facultative anaerobe Enterobacter sp FY-07

Kaihua Ji et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Chemistry, Applied

Cellulose acetate based 3-dimensional electrospun scaffolds for skin tissue engineering applications

Deniz Atila et al.

CARBOHYDRATE POLYMERS (2015)

Add to Collection

Article Chemistry, Applied

Structural modification and characterization of bacterial cellulose-alginate composite scaffolds for tissue engineering

Suchata Kirdponpattara et al.

CARBOHYDRATE POLYMERS (2015)

Add to Collection

Article Chemistry, Applied

Development of silver sulfadiazine loaded bacterial cellulose/sodium alginate composite films with enhanced antibacterial property

Wei Shao et al.

CARBOHYDRATE POLYMERS (2015)

Add to Collection

Article Agricultural Engineering

Preparation and characterization of new cellulose nanocrystals from marine biomass Posidonia oceanica

Fedia Bettaieb et al.

INDUSTRIAL CROPS AND PRODUCTS (2015)

Add to Collection

Article Biotechnology & Applied Microbiology

Chemical composition and functional properties of dietary fibre extracted by Englyst and Prosky methods from the alga Ulva lactuca collected in Tunisia

Hela Yaich et al.

ALGAL RESEARCH-BIOMASS BIOFUELS AND BIOPRODUCTS (2015)

Add to Collection

Article Biotechnology & Applied Microbiology

Bacterial cellulose production by Gluconacetobacter xylinus by employing alternative culture media

Angela Faustino Jozala et al.

APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Comparison of the Properties of Cellulose Nanocrystals and Cellulose Nanofibrils Isolated from Bacteria, Tunicate, and Wood Processed Using Acid, Enzymatic, Mechanical, and Oxidative Methods

Iulia A. Sacui et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Add to Collection

Article Biotechnology & Applied Microbiology

Ultrasound assisted ammonia pretreatment of sugarcane bagasse for fermentable sugar production

Govindarajan Ramadoss et al.

BIOCHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection

Review Biochemistry & Molecular Biology

The Potential of Cellulose Nanocrystals in Tissue Engineering Strategies

Rui M. A. Domingues et al.

BIOMACROMOLECULES (2014)

Add to Collection

Article Agricultural Engineering

Factors affecting cellulose hydrolysis based on inactivation of adsorbed enzymes

Zhuoliang Ye et al.

BIORESOURCE TECHNOLOGY (2014)

Add to Collection

Article Polymer Science

Nanocellulose in biomedicine: Current status and future prospect

Ning Lin et al.

EUROPEAN POLYMER JOURNAL (2014)

Add to Collection

Article Food Science & Technology

Preparation using Pectinase and Characterization of Nanofibers from Orange Peel Waste in Juice Factories

Akihiro Hideno et al.

JOURNAL OF FOOD SCIENCE (2014)

Add to Collection

Review Pharmacology & Pharmacy

A review of bacterial cellulose-based drug delivery systems: their biochemistry, current approaches and future prospects

Muhammad Mustafa Abeer et al.

JOURNAL OF PHARMACY AND PHARMACOLOGY (2014)

Add to Collection

Article Biochemistry & Molecular Biology

More Than Meets the Eye in Bacterial Cellulose: Biosynthesis, Bioprocessing, and Applications in Advanced Fiber Composites

Koon-Yang Lee et al.

MACROMOLECULAR BIOSCIENCE (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Surface modification of cellulose nanocrystals

Samuel Eyley et al.

NANOSCALE (2014)

Add to Collection

Article Chemistry, Physical

Probing crystal structure and mesoscale assembly of cellulose microfibrils in plant cell walls, tunicate tests, and bacterial films using vibrational Sum Frequency Generation (SFG) spectroscopy

Christopher M. Lee et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)

Add to Collection

Article Multidisciplinary Sciences

Molecular Modeling and Imaging of Initial Stages of Cellulose Fibril Assembly: Evidence for a Disordered Intermediate Stage

Candace H. Haigler et al.

PLOS ONE (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Chemical modification of cellulose extracted from sugarcane bagasse: Preparation of hydroxyethyl cellulose

E. S. Abdel-Halim

ARABIAN JOURNAL OF CHEMISTRY (2014)

Add to Collection

Article Biotechnology & Applied Microbiology

Investigation of biomass concentration, lipid production, and cellulose content in Chlorella vulgaris cultures using response surface methodology

Ana-Maria Aguirre et al.

BIOTECHNOLOGY AND BIOENGINEERING (2013)

Add to Collection

Article Chemistry, Applied

Graft copolymers from cellulose: Synthesis, characterization and evaluation

Vijay Kumar Thakur et al.

CARBOHYDRATE POLYMERS (2013)

Add to Collection

Article Chemistry, Applied

Bacterial cellulose and bacterial cellulose-chitosan membranes for wound dressing applications

Wen-Chun Lin et al.

CARBOHYDRATE POLYMERS (2013)

Add to Collection

Article Materials Science, Paper & Wood

Iα → Iβ transition of cellulose under ultrasonic radiation

Benjamin Briois et al.

CELLULOSE (2013)

Add to Collection

Article Chemistry, Applied

Hydrothermal synthesis of bacterial cellulose/AgNPs composite: A green route for antibacterial application

Guang Yang et al.

CARBOHYDRATE POLYMERS (2012)

Add to Collection

Article Chemistry, Applied

Homogeneous isolation of nanocellulose from sugarcane bagasse by high pressure homogenization

Jihua Li et al.

CARBOHYDRATE POLYMERS (2012)

Add to Collection

Review Materials Science, Multidisciplinary

A critical review of all-cellulose composites

Tim Huber et al.

JOURNAL OF MATERIALS SCIENCE (2012)

Add to Collection

Article Chemistry, Applied

Optimization of the nanofabrication by acid hydrolysis of bacterial cellulose nanowhiskers

Marta Martinez-Sanz et al.

CARBOHYDRATE POLYMERS (2011)

Add to Collection

Review Chemistry, Applied

Cellulose-based hydrogels: Present status and application prospects

Chunyu Chang et al.

CARBOHYDRATE POLYMERS (2011)

Add to Collection

Review Chemistry, Multidisciplinary

Cellulose nanomaterials review: structure, properties and nanocomposites

Robert J. Moon et al.

CHEMICAL SOCIETY REVIEWS (2011)

Add to Collection

Review Polymer Science

Cellulose-Based Bio- and Nanocomposites: A Review

Susheel Kalia et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2011)

Add to Collection

Article Engineering, Biomedical

Electromagnetically Controlled Biological Assembly of Aligned Bacterial Cellulose Nanofibers

Michael B. Sano et al.

ANNALS OF BIOMEDICAL ENGINEERING (2010)

Add to Collection

Review Chemistry, Multidisciplinary

Cellulose Nanocrystals: Chemistry, Self-Assembly, and Applications

Youssef Habibi et al.

CHEMICAL REVIEWS (2010)

Add to Collection

Article Pharmacology & Pharmacy

Development of swelling/floating gastroretentive drug delivery system based on a combination of hydroxyethyl cellulose and sodium carboxymethyl cellulose for Losartan and its clinical relevance in healthy volunteers with CYP2C9 polymorphism

Ray-Neng Chen et al.

EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2010)

Add to Collection

Review Chemistry, Multidisciplinary

Crystalline cellulose: structure and hydrogen bonds

V. I. Kovalenko

RUSSIAN CHEMICAL REVIEWS (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Cellulose Nanocrystals/Cellulose Core-in-Shell Nanocomposite Assemblies

Washington Luiz Esteves Magalhaes et al.

LANGMUIR (2009)

Add to Collection

Article Chemistry, Applied

An alternative carbon source from konjac powder for enhancing production of bacterial cellulose in static cultures by a model strain Acetobacter aceti subsp xylinus ATCC 23770

Feng Hong et al.

CARBOHYDRATE POLYMERS (2008)

Add to Collection

Article Cell & Tissue Engineering

Engineering microporosity in bacterial cellulose scaffolds

Henrik Backdahl et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Production of bacterial cellulose by a static cultivation using the waste from beer culture broth

Jung Hwan Ha et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2008)

Add to Collection

Article Polymer Science

Synthesis and characterization of bacterial cellulose/alginate blend membranes

Muenduen Phisalaphong et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

Add to Collection

Article Biotechnology & Applied Microbiology

Effective cellulose production by a coculture of Gluconacetobacter xylinus and Lactobacillus mali

Akira Seto et al.

APPLIED MICROBIOLOGY AND BIOTECHNOLOGY (2006)

Add to Collection

Article Agriculture, Multidisciplinary

Isolation and characterization of cellulose obtained from ultrasonic irradiated sugarcane bagasse

Chuan-Fu Liu et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of specific bonding interactions in poly(ε-caprolactone)/silica hybrid materials on optical transparency and melting behavior

KM Nie et al.

MATERIALS LETTERS (2005)

Add to Collection

Review Chemistry, Multidisciplinary

Cellulose: Fascinating biopolymer and sustainable raw material

D Klemm et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2005)

Add to Collection

Review Polymer Science

Rodlike cellulose microcrystals: Structure, properties, and applications

MMD Lima et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2004)

Add to Collection

Article Biotechnology & Applied Microbiology

Bacterial cellulose production by fed-batch fermentation in molasses medium

S Bae et al.

BIOTECHNOLOGY PROGRESS (2004)

Add to Collection

Article Biochemistry & Molecular Biology

Cellulose derivative-hyaluronic acid-based microporous hydrogels cross-linked through divinyl sulfone (DVS) to modulate equilibrium sorption capacity and network stability

A Sannino et al.

BIOMACROMOLECULES (2004)

Add to Collection

Article Engineering, Chemical

Optimization of multiple-frequency sonochemical reactors

AV Prabhu et al.

CHEMICAL ENGINEERING SCIENCE (2004)

Add to Collection

Article Chemistry, Multidisciplinary

Crystal structure and hydrogen bonding system in cellulose 1α, from synchrotron X-ray and neutron fiber diffraction

Y Nishiyama et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2003)

Add to Collection

Article Biochemistry & Molecular Biology

TEMPO-mediated oxidation of cellulose III

DD Perez et al.

BIOMACROMOLECULES (2003)

Add to Collection

Article Agricultural Engineering

Increased production of bacterial cellulose by Acetobacter sp V6 in synthetic media under shaking culture conditions

HJ Son et al.

BIORESOURCE TECHNOLOGY (2003)

Add to Collection

Review Polymer Science

Conformation and packing of various crystalline cellulose fibers

P Zugenmaier

PROGRESS IN POLYMER SCIENCE (2001)

Add to Collection

Article Biochemistry & Molecular Biology

Optimization of fermentation conditions for the production of bacterial cellulose by a newly isolated Acetobacter sp A9 in shaking cultures

HJ Son et al.

BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY (2001)

Add to Collection

Article Chemistry, Applied

A cellulosic exopolysaccharide produced from sugarcane molasses by a Zoogloea sp.

M Paterson-Beedle et al.

CARBOHYDRATE POLYMERS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.