☆ 4.7 Article

Effect of processing temperature on nanolignin quality during ultrafine friction grinding

INDUSTRIAL CROPS AND PRODUCTS (2023)

Related references

Note: Only part of the references are listed.

Article Agricultural Engineering

Recent advances of lignin valorization techniques toward sustainable aromatics and potential benchmarks to fossil refinery products

Rabia Jalil Khan et al.

Summary: This article provides an overview of the recent advances and challenges in the utilization of lignin as a substitute for conventional aromatics. It highlights the discovery of unexplored lignin structures and their potential functionalities. The breakthroughs in lignin-first pretreatment, catalytic lignin depolymerization, and the production of high-value products comparable to modern aromatics are reviewed, along with the possibility of retrofitting conventional petroleum refineries for lignin products.

BIORESOURCE TECHNOLOGY (2022)

Add to Collection

Article Agricultural Engineering

Gas-driven shearing nanonization of lignin particles for efficient reduction of graphene oxide

Zhiliang Zhang et al.

Summary: Nanonization of lignin into nanoparticles enhances its reduction ability, and the gas-driven shearing nanonization method offers a green and simple alternative for the preparation of LNs.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Green solvents-based molecular weight controllable fractionation process for industrial alkali lignin at room temperature

Huiqi Jin et al.

Summary: A green solvent system was developed for the molecular weight-controllable fractionation of industrial alkali lignin. The fractionation process, achieved by adjusting the ratio of water, ethanol, and gamma-Valerolactone, resulted in six levels of lignin with stepwise controllable molecular weight. The fractionation was confirmed to be a physical process without altering the chemical structure of lignin. The fractionated lignin with higher molecular weight exhibited narrower polydispersity and the fractionated lignin with lower molecular weight had higher content of hydroxyl and carboxyl groups, which could enhance its chemical reactivity in downstream applications.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Review Biochemistry & Molecular Biology

A recent advancement on preparation, characterization and application of nanolignin

M. Hazwan Hussin et al.

Summary: Each year, millions of lignin are produced as by-products worldwide, with most of it being burnt for energy production. However, the conversion of lignin into nanolignin is gaining attention and has various potential applications in different fields.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Highly efficient and selective modification of lignin towards optically designable and multifunctional lignocellulose nanopaper for green light-management applications

Yan Jiang et al.

Summary: This study developed a highly efficient, controllable and eco-friendly lignin modification strategy for adjusting the optical performance of transparent lignocellulose nanopaper (LNP) and achieving patterning. The lignin-modified LNP showed high visible light transmittance, high haze, and excellent UV-shielding capacity. It also exhibited water and thermal stability, barrier properties, durability, and biodegradability, making it suitable for practical applications.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Agricultural Engineering

Characterization of different types of lignin and their potential use in green adhesives

Jeanne Gendron et al.

Summary: This study characterized different types of lignin and incorporated them into a pressure sensitive adhesive formulation. It was found that organosolv lignin with lower molecular weight and higher amounts of phenolic OH groups positively affected the adhesive properties.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Different Kraft lignin sources for electrospun nanostructures production: Influence of chemical structure and composition

Luisa Garcia-Fuentevilla et al.

Summary: This study focuses on the structural features and physicochemical properties of different Kraft lignins and their influence on the electrospinning process to obtain nanostructures. The results show that under appropriate conditions, Kraft lignins can form fibrous structures at the nanoscale.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Agricultural Engineering

Production of lignin-containing cellulose nanofibrils by the combination of different mechanical processes

Malek Khadraoui et al.

Summary: This study aims to address the high energy consumption issue in the production of cellulose nanofibrils. By extracting lignin-containing cellulose nanofibrils from Posidonia oceanica waste and using environmentally friendly and low energy consuming processes for microfibrillation, the properties of the obtained gels were evaluated through various analysis methods. It was concluded that steam explosion could be an alternative method for fiber extraction.

INDUSTRIAL CROPS AND PRODUCTS (2022)

Add to Collection

Article Biochemistry & Molecular Biology

Preparation, characterization and formation mechanism of size-controlled lignin nanoparticles

Yingying Yang et al.

Summary: This study presents a simple and rapid approach for the fabrication of size-controlled lignin nanoparticles (LNPs) using a titrimetric nanoprecipitation method. The prepared LNPs have spherical shapes with porous surfaces and controllable particle sizes. The chemical structural characteristics of LNPs are similar to those of the original lignin.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Environmentally sustainable, high-performance lignin-derived universal adhesive

Sandip K. Singh et al.

Summary: This paper introduces a novel lignin-based adhesive synthesized through the synergistic reaction between lignin, dimethylformamide, and acrylic acid under a basic environment. The characterized adhesive shows excellent adhesive performance on various substrates and exhibits good physical-mechanical strength under neutral, acidic, or basic media. It is a versatile and universally applicable adhesive.

GREEN CHEMISTRY (2022)

Add to Collection

Review Biochemistry & Molecular Biology

Biological Activities and Emerging Roles of Lignin and Lignin-Based Products-A Review

Fan Shu et al.

Summary: Bioactive substances derived from plants, such as lignin, have shown various health benefits and medical applications. Lignin not only possesses intrinsic bioactivities against phytopathogens, but also has potential for antitumor, antivirus activities, regulation of plant growth, and enzymatic hydrolysis of cellulose. This review highlights the bioactive potential of lignin in various fields and explores its bonding mechanisms with biotissues and cells for the conversion into value-added materials.

BIOMACROMOLECULES (2021)

Add to Collection

Article Energy & Fuels

A Sequential Autohydrolysis-Ionic Liquid Fractionation Process for High Quality Lignin Production

Jing Wang et al.

Summary: The study proposes a two-step biomass fractionation strategy for separating cellulose, hemicellulose, and lignin with higher efficiency and purity. The process significantly improved enzymatic saccharification, resulting in a higher lignin yield compared to single-stage treatments. Structural characterization showed that the isolated lignin maintained minimal modifications and had unique functionality, highlighting the benefits of this process for lignin fractionation.

ENERGY & FUELS (2021)

Add to Collection

Review Engineering, Environmental

Lignin based nano-composites: Synthesis and applications

G. Parvathy et al.

Summary: Lignin, a renewable material with excellent properties, has gained research interest for its potential applications in various fields, making it a valuable material in the composite arena.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

New Mechanistic Insights into the Lignin β-O-4 Linkage Acidolysis with Ethylene Glycol Stabilization Aided by Multilevel Computational Chemistry

Alessandra De Santi et al.

Summary: Acidolysis combined with stabilization of reactive intermediates is a powerful method for lignin depolymerization, leading to high yields of aromatic monomers. This study aims to elucidate key mechanistic questions using a combination of experimental and computional approaches.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Review Biotechnology & Applied Microbiology

Lignin nanoparticles enter the scene: A promising versatile green tool for multiple applications

Willian Daniel Hahn Schneider et al.

Summary: Lignin nanoparticles are considered a green and sustainable way to utilize renewable resources in various applications. Produced from different lignin types using different methods, these nanoparticles exhibit varying characteristics in terms of morphology, size, and stability. Studies have shown their potential in fields such as antioxidants, drug carriers, and more, making them a promising area of research in biotechnology and green chemistry.

BIOTECHNOLOGY ADVANCES (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fabricating Nanodiamonds from Biomass by Direct Laser Writing under Ambient Conditions

Yan Lin et al.

Summary: Commercial nanodiamonds were successfully produced on paper made from nanolignin/cellulose nanofibrils composite film by means of direct laser writing at ambient temperature and air pressure. The generation of NDs was largely dependent on high laser power, while suitable cellulose content in LCNFs can accelerate laser carbonization.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Natural Organic Ultraviolet Absorbers from Lignin

Keigo Mikame et al.

Summary: Excessive exposure to UV-A and UV-B radiation can cause premature skin aging, inflammation, and skin cancers. UV-absorbing compounds can minimize the harmful effects of solar radiation. Lignin, a biomass resource, can be used to produce UV absorbers through specific chemical modifications, resulting in compounds with UV-A and UV-B absorbing properties. The development of lignin-derived compounds with defined chemical structures from various plant biomass sources offers natural UV-absorbing materials for cosmetics and resin additives.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Phosphorus containing group and lignin toward intrinsically flame retardant cellulose nanofibril-based film with enhanced mechanical properties

Shanshan Zhang et al.

Summary: This study successfully prepared bamboo-based phosphorylated cellulose nanofibril films with excellent mechanical performance and remarkable flame resistance, showing promising potential for applications in flame-retardant packaging materials.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fabricating Graphene and Nanodiamonds from Lignin by Femtosecond Laser Irradiation

Yan Lin et al.

Summary: This study demonstrates a new transformation path from lignin to graphene and nanodiamonds using femto-second laser writing in air at ambient temperature and pressure. The results show that laser power is more important than writing speed for the synthesis of carbon nanoparticles, with high power contributing to enhanced electrically conductive performance. Direct laser irradiation technique is a simple, low-cost, and sustainable way to synthesize graphene and NDs, promising for the fabrication of sensors and electric devices.

ACS OMEGA (2021)

Add to Collection

Review Biochemistry & Molecular Biology

The role of lignin and lignin-based materials in sustainable construction-A comprehensive review

Patryk Jedrzejczak et al.

Summary: The construction industry in the 21st century faces increasing global challenges related to environmental concerns. This review focuses on the role of lignin and its derivatives in sustainable construction, which can partially replace petroleum products and make the sector more sustainable. The latest technological developments offer alternative materials for construction with reduced environmental impact, contributing to a more sustainable industry.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Polymer Science

Ultrafine Friction Grinding of Lignin for Development of Starch Biocomposite Films

Seyedeh Najmeh Mousavi et al.

Summary: This study demonstrates the development of starch-lignin biocomposites using fractionalized lignin from soda pulping black liquor, achieving improved mechanical properties and thermal stability through the formation of lignin nanoparticles by ultrafine friction grinding. The research confirms the compatibility between lignin particles and starch in the composites, leading to an enhancement in tensile strain by 40% compared to starch films, and the potential of the composite films to act as an ultraviolet barrier in packaging applications has been demonstrated.

POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Phenolic Hydroxyl Groups in the Lignin Polymer Affect the Formation of Lignin Nanoparticles

Jae Hoon Lee et al.

Summary: In this study, alkaline soda lignin was fractionated and chemoselectively methylated to investigate their impact on nanoparticle formation. The size properties of methylated lignin nanoparticles showed a high negative correlation with the phenolic hydroxyl group amount, suggesting an influence on nucleation or condensation during the nanoprecipitation process. Lignin nanoparticles exhibited high colloidal stability and good in vitro cell viability, presenting a possible approach to control nanoparticle size by blocking specific functional groups.

NANOMATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Structural and molecular-weight-dependency in the formation of lignin nanoparticles from fractionated soft- and hardwood lignins

Ievgen Pylypchuk et al.

Summary: The use of forest lignin as a renewable resource is a greener alternative to the petrochemical industry, advancing the development of environmentally friendly industrial processes. Greater understanding of lignin as a raw material is crucial for creating sustainable value chains. In-depth knowledge of the forces and interactions driving the self-assembly of lignin nanoparticles is required for the development of advanced lignin nanomaterials.

GREEN CHEMISTRY (2021)

Add to Collection

Article Materials Science, Paper & Wood

Lignin nanoparticles modified with tall oil fatty acid for cellulose functionalization

Harri Setala et al.

CELLULOSE (2020)

Add to Collection

Article Food Science & Technology

Effect of ultra-fine friction grinding on the physical and chemical properties of curcuma (Curcuma longa L.) suspensions

A. M. Serpa Guerra et al.

JOURNAL OF FOOD SCIENCE (2020)

Add to Collection

Article Forestry

Isolation and characterization of lignocellulosic nanofibers from four kinds of organosolv-fractionated lignocellulosic materials

Xiaoyu Wang et al.

WOOD SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Agricultural Engineering

Preparation of low carbon impact lignin nanoparticles with controllable size by using different strategies for particles recovery

Leonidas Matsakas et al.

INDUSTRIAL CROPS AND PRODUCTS (2020)

Add to Collection

Article Agricultural Engineering

Effects of hydrothermal pretreatment on nano-mechanical property of switchgrass cell wall and on energy consumption of isolated lignin-coated cellulose nanofibrils by mechanical grinding

Kaimeng Xu et al.

INDUSTRIAL CROPS AND PRODUCTS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Lignin to Materials: A Focused Review on Recent Novel Lignin Applications

Osbert Yu et al.

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Plant Sciences

Possible mechanisms for the generation of phenyl glycoside-type lignin-carbohydrate linkages in lignification with monolignol glucosides

Yasuyuki Miyagawa et al.

PLANT JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Green Synthesis and Characterization of Gold Nanoparticles Using Lignin Nanoparticles

Baobin Wang et al.

NANOMATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Comparing multistage liquid-liquid extraction with cold water precipitation for improvement of lignin recovery from deep eutectic solvents

Dion Smink et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Synergic Effect of Nanolignin and Metal Oxide Nanoparticles into Poly(L-lactide) Bionanocomposites: Material Properties, Antioxidant Activity, and Antibacterial Performance

Erlantz Lizundia et al.

ACS APPLIED BIO MATERIALS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Greener synthesis of lignin nanoparticles and their applications

Siavash Iravani et al.

GREEN CHEMISTRY (2020)

Add to Collection

Article Biochemistry & Molecular Biology

Highly mechanical properties nanocomposite hydrogels with biorenewable lignin nanoparticles

Ying Chen et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Lignin Particles for Multifunctional Membranes, Antioxidative Microfiltration, Patterning, and 3D Structuring

Oriol Cusola et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Chemistry, Applied

Isolation and characterisation of cellulose nanocrystals from sago seed shells

Subair Naduparambath et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High-strength lignin-based carbon fibers via a low-energy method

Zhong Dai et al.

RSC ADVANCES (2018)

Add to Collection

Article Multidisciplinary Sciences

Direct evidence for α ether linkage between lignin and carbohydrates in wood cell walls

Hiroshi Nishimura et al.

SCIENTIFIC REPORTS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Lignin-Containing Photoactive Resins for 3D Printing by Stereolithography

Jordan T. Sutton et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Colloidal Lignin Particles as Adhesives for Soft Materials

Maija-Liisa Mattinen et al.

NANOMATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Cellulose-Lignin Biodegradable and Flexible UV Protection Film

Hasan Sadeghifar et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Agricultural Engineering

Preparation and formation mechanism of size-controlled lignin nanospheres by self-assembly

Fuquan Xiong et al.

INDUSTRIAL CROPS AND PRODUCTS (2017)

Add to Collection

Review Biochemistry & Molecular Biology

An overview of natural renewable bio-polymer lignin towards nano and biotechnological applications

Selvaraj Mohana Roopan

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Alkaline Pretreatment Severity Leads to Different Lignin Applications in Sugar Cane Biorefineries

Fabricia Farias de Menezes et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Chemistry, Multidisciplinary

New insights into the structure and composition of technical lignins: a comparative characterisation study

Sandra Constant et al.

GREEN CHEMISTRY (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Structural elucidation of whole lignin from Eucalyptus based on preswelling and enzymatic hydrolysis

Jia-Long Wen et al.

GREEN CHEMISTRY (2015)

Add to Collection

Article Agricultural Engineering

Kraft lignin as filler in PLA to improve ductility and thermal properties

Oihana Gordobil et al.

INDUSTRIAL CROPS AND PRODUCTS (2015)

Add to Collection

Article Acoustics

Obtaining lignin nanoparticles by sonication

Iulian Andrei Gilca et al.

ULTRASONICS SONOCHEMISTRY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

High Shear Homogenization of Lignin to Nanolignin and Thermal Stability of Nanolignin-Polyvinyl Alcohol Blends

Sandeep S. Nair et al.

CHEMSUSCHEM (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Thermomechanical Properties of Lignin-Based Electrospun Nanofibers and Films Reinforced with Cellulose Nanocrystals: A Dynamic Mechanical and Nanoindentation Study

Mariko Ago et al.

ACS APPLIED MATERIALS & INTERFACES (2013)

Add to Collection

Article Agricultural Engineering

Effects of grinding processes on enzymatic degradation of wheat straw

Gabriela Ghizzi D. Silva et al.

BIORESOURCE TECHNOLOGY (2012)

Add to Collection

Article Engineering, Chemical

Stability of particle suspensions after fine grinding

S. L. A. Hennart et al.

POWDER TECHNOLOGY (2010)

Add to Collection

Article Engineering, Geological

PARTICLE CRUSHING AND DEFORMATION BEHAVIOUR

Mamoru Kikumoto et al.

SOILS AND FOUNDATIONS (2010)

Add to Collection

Article Engineering, Chemical

Wood dowel bonding by high-speed rotation welding

A Pizzi et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.