☆ 4.6 Article

Novel CFD-DEM Model for Spouted Bed Drying Incorporating Intraparticle Heat and Mass Diffusion

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Intermittent Drying of Soybeans in Conical Spouted Beds: Modeling Approach

Ronaldo Correia de Brito et al.

Summary: This study aims to propose a fully predictive model for intermittent drying in conical spouted bed dryers. The proposed model provides physically consistent results and is coherent with the experimental data. It contributes to obtain optimal drying parameters in order to minimize drying costs and improve product quality.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2023)

Add to Collection

Article Engineering, Environmental

PEPT validated CFD-DEM model of aspherical particle motion in a spouted bed

Hanqiao Che et al.

Summary: Computational Fluid Dynamics coupled with Discrete Element Method (CFD-DEM) was used to model the dynamics of aspherical particles in a spouted bed. The CFD-DEM results were rigorously validated against experimental data acquired using Positron Emission Particle Tracking (PEPT). The study showed that the Young's modulus, Poisson's ratio, and restitution coefficient did not significantly affect the system's dynamics, and that Gidaspow's correlation using equivalent intrinsic particle density was suitable for modelling drag forces. The analysis demonstrated that the PEPT-validated CFD-DEM models accurately captured key features of the system, including particle circulation time, velocity and occupancy distributions, and residence time in different regions. The study also showed that models using simple, spherical particles could quantitatively reproduce the dynamics of highly aspherical materials.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Engineering, Chemical

CFD-DEM-IBM simulation of particle drying processes in gas-fluidized beds

Bin Lan et al.

Summary: Drying processes are important in industrial dryers and require understanding of flow behavior, mass and heat transfer. This study developed a CFD-DEM method to simulate particle drying processes and validated the model by comparing with experimental data.

CHEMICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Engineering, Chemical

Investigation of gas-solid heat and mass transfer in a Wurster coater using a scaled CFD-DEM model

H. Q. Che et al.

Summary: This study proposes a complete and reliable CFD-DEM model to investigate the Wurster coating process, with a focus on numerical methods for inter-phase heat and mass transfer and a novel scaling approach for coating processes with many particles. The simulations reveal particle drying modes in the coating process and suggest a method for predicting over-spraying.

POWDER TECHNOLOGY (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Numerical investigation of the particle circulation characteristics in a tapered fluidized bed

Hanqiao Che et al.

Summary: The objective of this study is to investigate the particle circulation characteristics in a tapered fluidized bed (TFB). The study explores an appropriate method to quantify particle circulation time, the effects of operational parameters on particle circulation time, and the relationship between particle mixing and particle circulation. The findings suggest that air velocity, wall inclination angle, particle size, inter-particle cohesive forces, and the open area ratio of the central region of the air distributor all have significant effects on particle circulation. The study provides valuable insights for the design, optimization, and control of processes involving TFBs.

ENGINEERING COMPUTATIONS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

On the Applicability of the Coarse Grained Coupled CFD-DEM Model to Predict the Heat Transfer During the Fluidized Bed Drying of Pharmaceutical Granules

Hossain Aziz et al.

Summary: Fluidized bed dryer is commonly used in pharmaceutical industry for drying wet granules. A coarse grained coupled CFD-DEM method has been developed to reduce the number of particles to be tracked in the simulation and accurately simulate the dynamics of fluidized particles by scaling the interaction forces appropriately.

PHARMACEUTICAL RESEARCH (2022)

Add to Collection

Article Engineering, Chemical

Mass transfer in conical spouted beds equipped with internal devices

Xabier Sukunza et al.

Summary: The gas-solid contact in spouted beds is characterized by high heat and mass transfer rates. The mass transfer coefficient in conical spouted beds equipped with internal devices can be accurately predicted using a new correlation that takes into account bed material properties, air inlet temperature and velocity, and dimensions of the internals.

POWDER TECHNOLOGY (2022)

Add to Collection

Review Engineering, Chemical

Coarse-Grain DEM Modelling in Fluidized Bed Simulation: A Review

Alberto Di Renzo et al.

Summary: In the past decade, the application of CFD-DEM for fluidized beds has expanded from small, lab-scale units to larger scale systems, benefiting greatly from coarse graining methods. By introducing coarse graining procedures based on different physical backgrounds, the number of particles that can be simulated has increased, covering pilot-scale and industrially relevant systems. The review discusses scaling for contact forces, hydrodynamic forces, and cohesive forces, quantifying computational savings in terms of coarse graining degree and presenting recent applications and future directions in the field.

PROCESSES (2021)

Add to Collection

Review Energy & Fuels

Shrinkage, effective diffusion coefficient, surface transfer coefficients and their factors during solar drying of food products-A review

Vishnuvardhan Reddy Mugi et al.

Summary: Solar drying of food products offers economical and environmentally friendly method for extending shelf-life. Various factors such as shrinkage, effective diffusion coefficient (De), surface transfer coefficients play a major role in influencing the solar drying process. Mathematical models are utilized to determine these factors and their influencing factors like moisture content, air temperature, velocity, thickness and geometry of the product are discussed. This review provides valuable insights and recommendations for further research in solar drying area.

SOLAR ENERGY (2021)

Add to Collection

Article Engineering, Chemical

Modeling of inter- and intra-particle coating uniformity in a Wurster fluidized bed by a coupled CFD-DEM-Monte Carlo approach

Zhaochen Jiang et al.

CHEMICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Engineering, Chemical

CFD-DEM study of the effects of food grain properties on drying and shrinkage in a fluidised bed

Jannatul Azmir et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

DEM Investigation of the Influence of Particulate Properties and Operating Conditions on the Mixing Process in Rotary Drums: Part 1-Determination of the DEM Parameters and Calibration Process

Jakub Hlosta et al.

PROCESSES (2020)

Add to Collection

Article Engineering, Chemical

CFD-DEM simulation of drying of food grains with particle shrinkage

Jannatul Azmir et al.

POWDER TECHNOLOGY (2019)

Add to Collection

Article Engineering, Chemical

Real-time monitoring of milk powder moisture content during drying in a spouted bed dryer using a hybrid neural soft sensor

Gustavo N. A. Vieira et al.

DRYING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Environmental

Numerical investigation of a coarse-grain discrete element method in solid mixing in a spouted bed

Kazuya Takabatake et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Chemical

Influence of gas inflow modelling on CFD-DEM simulations of three-dimensional prismatic spouted beds

Paul Kieckhefen et al.

POWDER TECHNOLOGY (2018)

Add to Collection

Article Engineering, Chemical

Simulation of flow and drying characteristics of high-moisture particles in an impinging stream dryer via CFD-DEM

Patiwat Khomwachirakul et al.

DRYING TECHNOLOGY (2016)

Add to Collection

Article Engineering, Chemical

Recurrence CFD - A novel approach to simulate multiphase flows with strongly separated time scales

T. Lichtenegger et al.

CHEMICAL ENGINEERING SCIENCE (2016)

Add to Collection

Article Engineering, Chemical

Investigation of gas-solids flow characteristics in a conical fluidized bed dryer by pressure fluctuation and electrical capacitance tomography

Ruihuan Ge et al.

DRYING TECHNOLOGY (2016)

Add to Collection

Article Thermodynamics

A modeling study for moisture diffusivities and moisture transfer coefficients in drying of passion fruit peel

Carolina Vieira Bezerra et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2015)

Add to Collection

Article Engineering, Chemical

Influence of drying conditions on layer porosity in fluidized bed spray granulation

C. Rieck et al.

POWDER TECHNOLOGY (2015)

Add to Collection

Review Green & Sustainable Science & Technology

Applications of software in solar drying systems: A review

Prashant Singh Chauhan et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Add to Collection

Article Engineering, Chemical

Moisture Prediction During Paste Drying in a Spouted Bed

B. S. Nascimento et al.

DRYING TECHNOLOGY (2013)

Add to Collection

Article Engineering, Chemical

Determining the effective diffusion coefficient of water in banana (Prata variety) during osmotic dehydration and its use in predictive models

Barbara D. A. Porciuncula et al.

JOURNAL OF FOOD ENGINEERING (2013)

Add to Collection

Article Engineering, Chemical

Computational Study of the Effects of Material Properties on Heat Transfer in Gas Fluidization

Qin-Fu Hou et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2012)

Add to Collection

Article Thermodynamics

Models, algorithms and validation for opensource DEM and CFD-DEM

Christoph Kloss et al.

PROGRESS IN COMPUTATIONAL FLUID DYNAMICS (2012)

Add to Collection

Review Pharmacology & Pharmacy

Mechanistic modelling of fluidized bed drying processes of wet porous granules: A review

Severine Therese F. C. Mortier et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2011)

Add to Collection

Article Engineering, Chemical

CFD-DEM simulation of gas-solid reacting flows in fluid catalytic cracking (FCC) process

Changning Wu et al.

CHEMICAL ENGINEERING SCIENCE (2010)

Add to Collection

Article Thermodynamics

Mathematical modelling of the thin layer solar drying of banana, mango and cassava

Kamenan Blaise Koua et al.

ENERGY (2009)

Add to Collection

Article Engineering, Chemical

Statistical modelling of the spouted bed coating process using positron emission particle tracking (PEPT) data

C. Seiler et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2008)

Add to Collection

Article Engineering, Chemical

Characterization of the pneumatic behavior of a novel spouted bed apparatus with two adjustable gas inlets

O. Gryczka et al.

CHEMICAL ENGINEERING SCIENCE (2008)

Add to Collection

Article Engineering, Chemical

Modelling of batch fluidised bed drying of pharmaceutical granules

H. G. Wang et al.

CHEMICAL ENGINEERING SCIENCE (2007)

Add to Collection

Article Engineering, Chemical

A generic population balance model for simultaneous agglomeration and drying in fluidized beds

Mirko Peglow et al.

CHEMICAL ENGINEERING SCIENCE (2007)

Add to Collection

Article Engineering, Chemical

Modern modelling methods in drying

Thomas Metzger et al.

TRANSPORT IN POROUS MEDIA (2007)

Add to Collection

Article Engineering, Chemical

Spray dryers: Modeling and simulation

VS Birchal et al.

DRYING TECHNOLOGY (2006)

Add to Collection

Article Engineering, Chemical

Flow regimes in a spout-fluid bed: A combined experimental and simulation study

JM Link et al.

CHEMICAL ENGINEERING SCIENCE (2005)

Add to Collection

Article Engineering, Chemical

Influence of shapes of selected vegetable materials on drying kinetics during fluidized bed drying

W Senadeera et al.

JOURNAL OF FOOD ENGINEERING (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.