4.6 Article

Influence of Synthesis-Heating Conditions on the Porosity and Performance of a Carbon Nanotube/SDS-Alumina Nanocomposite for Effective Wastewater Treatment: Fabrication, Characterization, and Adsorption Modeling

Related references

Note: Only part of the references are listed.
Article Chemistry, Applied

High-efficiency foam fractionation of anthocyanin from perilla leaves using surfactant-free active Al2O3 nanoparticle as collector and frother: Performance and mechanism

Lin Chen et al.

Summary: This study developed a surfactant-free active Al2O3 nanoparticle (ANP) modified with adipic acid (AA) as a collector and frother for efficient recovery of anthocyanin (ACN) from perilla leaves. The ANP-AA had a high collection capacity for ACN and formed a stable foam layer at the gas-liquid interface. Under appropriate conditions, ACN recovery of 95.68% with an enrichment ratio of 29.87 was achieved. The recovered ACN also exhibited promising antioxidant properties, highlighting the significance of these findings in the food, colorant, and pharmaceutical industries.

FOOD CHEMISTRY (2023)

Article Chemistry, Multidisciplinary

Facile Strategy for Fabricating an Organosilica-Modified Fe3O4 (OS/Fe3O4) Hetero-nanocore and OS/Fe3O4@SiO2 Core-Shell Structure for Wastewater Treatment with Promising Recyclable Efficiency

Mohamed A. Habila et al.

Summary: A sustainable adsorbent was developed for heavy metal ion remediation, using a simple modification of Fe3O4 magnetic nanoparticles with organosilica. The modified nanoparticles showed excellent adsorption properties for heavy metals and were stable in acidic medium.

ACS OMEGA (2023)

Article Environmental Sciences

Synthesis of nanostructured novel ion-imprinted polymer for selective removal of Cu2+and Sr2+ions from reverse osmosis concentrated brine

Mariam Khan et al.

Summary: This study aimed to prepare an ion-imprinted polymer (IIP) called IIP-Cu, using copper sulfate as a template and potassium persulfate as an initiator, and tested its effectiveness in selectively adsorbing copper ions (Cu2+) and strontium ions (Sr2+) from aqueous solutions. Various characterizations confirmed the successful removal of the template, revealing a rough and porous topology of the IIP-Cu. The adsorption of Cu2+ onto IIP-Cu was best explained using Langmuir models, with a maximum adsorption capacity of 159 mg/g. Furthermore, the efficiency of the prepared IIP-Cu was tested in real brine water, showing promising results in removing Cu2+ and competing ions.

ENVIRONMENTAL RESEARCH (2023)

Article Chemistry, Multidisciplinary

Selective Extraction of Trace Arsenite Ions Using a Highly Porous Aluminum Oxide Membrane with Ordered Nanopores

Hilal Ahmad et al.

Summary: In this study, a through-hole aluminum oxide membrane (AOM) was prepared by electrochemical anodization of aluminum substrates. The AOM with ordered nanopores exhibited high porosity and selective sorption capability for arsenite ions. The AOM was utilized for solid-phase microextraction and preconcentration of arsenite ions in water samples, demonstrating good analytical performance.

ACS OMEGA (2022)

Article Environmental Sciences

Heavy metal associated health hazards: An interplay of oxidative stress and signal transduction

Jagdish Gopal Paithankar et al.

Summary: The oxidative stress induced by heavy metals and its connection with different signaling pathways are complex, which may lead to a variety of health issues. Exposure to heavy metals/metalloids such as Arsenic, Chromium, Cadmium, and Lead can trigger oxidative stress and subsequently cellular and organismal responses, involving regulation of multiple signaling pathways.

CHEMOSPHERE (2021)

Article Chemistry, Inorganic & Nuclear

Adsorption of organic pollutants and heavy metal by Co-doped core-shell MoO2/Mo2C adsorbent

Ya Zhang et al.

Summary: A CoO/MoO2/Mo2C composite with core-shell structure was successfully prepared and exhibited enhanced adsorption performance and stability. This versatile composite material is promising for adsorbing various organic pollutants and heavy metals, showing great potential for practical applications.

JOURNAL OF SOLID STATE CHEMISTRY (2021)

Article Chemistry, Analytical

Sodium dodecyl sulfate-multi-walled carbon nanotubes-coated-membrane solid phase extraction of glucocorticoids in aqueous matrices

Shalene Xue Lin Goh et al.

Summary: A novel membrane-based SPE-UHPLC-MS/MS method was developed for the determination of nine glucocorticoids in water, with the use of SDS-MWCNTs material and membrane device, enhancing the overall extraction efficiency.

TALANTA (2021)

Article Biodiversity Conservation

Heavy metal pollution and potential ecological risk assessment for surficial sediments of Deepor Beel, India

Siddhant Dash et al.

Summary: This study aimed to evaluate sediment pollution loadings and ecological risks, with three objectives. Through hierarchical clustering and principal component analysis, it was found that wetlands are most affected during the post-monsoon season, with most sites falling under moderate risk category. Cd was identified as the primary contributor to ecological risk. Chemical speciation analyses revealed different heavy metals' availability forms in sediment, highlighting the negative impact of Cr, Mn, and Mg on aquatic ecology.

ECOLOGICAL INDICATORS (2021)

Article Energy & Fuels

Boosting high-rate-partial-state-of-charge performance of lead-acid batteries by incorporating trace amount of sodium dodecyl sulfate modified multi-walled carbon nanotubes into negative active materials

Li Dong et al.

Summary: By incorporating SDS-MWCNTs into the negative active materials of lead acid battery, the 3BS percentage and crystal size are significantly improved. The interconnected Pb rod morphology in the NAMs containing SDS-MWCNTs accelerates the electrochemical reactions between Pb and PbSO4, leading to an extended cycle-life for the battery.

JOURNAL OF ENERGY STORAGE (2021)

Article Thermodynamics

Influence of surfactants on thermal performance of Al2O3/water nanofluids in a two-phase closed thermosyphon

Seungyeop Baek et al.

Summary: Experimental study showed that adding SDBS to distilled water and alumina nanofluid can decrease surface tension and reduce thermal resistance. However, a significant decrease in surface tension may lead to an increase in thermal resistance.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Article Nanoscience & Nanotechnology

Multiwalled Carbon Nanotubes Coated with Nitrogen-Sulfur Co-Doped Activated Carbon for Detecting Fenitrothion

Krishna Jangid et al.

Summary: This study presents a nonenzymatic electrochemical sensor for sensitive and specific detection of fenitrothion (FT) using a glassy carbon electrode modified with nitrogen-sulfur co-doped activated carbon-coated multiwalled carbon nanotubes (NS-AC-MWCNTs). By optimizing the synthesis of NS-AC-MWCNTs and sensor parameters, the sensor achieves a linear current response and a low detection limit of 4.91 nM for FT, with the ability to detect FT in real water samples.

ACS APPLIED NANO MATERIALS (2021)

Article Chemistry, Multidisciplinary

Fabrication of renewable palm-pruning leaves based nano-composite for remediation of heavy metals pollution

Zeid A. Alothman et al.

Arabian Journal of Chemistry (2020)

Article Multidisciplinary Sciences

Environmental exposure to metal mixtures and linear growth in healthy Ugandan children

Emily C. Moody et al.

PLOS ONE (2020)

Article Chemistry, Multidisciplinary

Activated Carbon from Spent Coffee Grounds: A Good Competitor of Commercial Carbons for Water Decontamination

Egle Rosson et al.

APPLIED SCIENCES-BASEL (2020)

Article Biochemistry & Molecular Biology

Phosphonium-based Ionic Liquid Modified Activated Carbon from Mixed Recyclable Waste for Mercury(II) Uptake

Mohamed A. Habila et al.

MOLECULES (2019)

Review Chemistry, Multidisciplinary

Nanomaterials for the Removal of Heavy Metals from Wastewater

Jinyue Yang et al.

NANOMATERIALS (2019)

Article Materials Science, Biomaterials

Adsorption capacity of heavy metal ions using sultone-modified magnetic activated carbon as a bio-adsorbent

Vajihe Nejadshafiee et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Article Environmental Sciences

A review of heavy metal pollution levels and health risk assessment of urban soils in Chinese cities

Libo Pan et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)

Article Engineering, Environmental

A ligand anchored conjugate adsorbent for effective mercury(II) detection and removal from aqueous media

Khalid Abbas et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Review Environmental Sciences

Adsorption of heavy metals on conventional and nanostructured materials for wastewater treatment purposes: A review

Alexander E. Burakov et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2018)

Review Environmental Sciences

Low-cost Adsorbents Derived from Agricultural By-products/Wastes for Enhancing Contaminant Uptakes from Wastewater: A Review

Mohamed Sulyman et al.

POLISH JOURNAL OF ENVIRONMENTAL STUDIES (2017)

Article Materials Science, Multidisciplinary

Adsorption Equilibrium for Heavy Metal Divalent Ions (Cu2+, Zn2+, and Cd2+) into Zirconium-Based Ferromagnetic Sorbent

Agnes Yung Weng Lee et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2017)

Review Chemistry, Multidisciplinary

Modelling and Interpretation of Adsorption Isotherms

Nimibofa Ayawei et al.

JOURNAL OF CHEMISTRY (2017)

Article Engineering, Chemical

Dye removal and kinetics of adsorption by magnetic chitosan nanoparticles

Fatemeh Hosseini et al.

DESALINATION AND WATER TREATMENT (2016)

Article Chemistry, Physical

Fabrication of Graphene-Alumina Heterostructured Films with Nanotube Morphology

Arunas Jagminas et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2016)

Article Nanoscience & Nanotechnology

Structural and Morphological Features of Disperse Alumina Synthesized Using Aluminum Nitrate Nonahydrate

Ivan F. Myronyuk et al.

NANOSCALE RESEARCH LETTERS (2016)

Article Nanoscience & Nanotechnology

Structural and Morphological Features of Disperse Alumina Synthesized Using Aluminum Nitrate Nonahydrate

Ivan F. Myronyuk et al.

NANOSCALE RESEARCH LETTERS (2016)

Article Water Resources

Adsorption of textile dyes on raw and decanted Moroccan clays: Kinetics, equilibrium and thermodynamics

R. Elmoubarki et al.

WATER RESOURCES AND INDUSTRY (2015)

Review Environmental Sciences

Sorption of pollutants by porous carbon, carbon nanotubes and fullerene- An overview

Vinod K. Gupta et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2013)

Article Thermodynamics

Multiwall Carbon Nanotube for Adsorption of Acetic Acid

Onder Ozcan et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2013)

Article Chemistry, Physical

Understanding Carbon Dioxide Adsorption in Carbon Nanotube Arrays: Molecular Simulation and Adsorption Measurements

Mahshid Rahimi et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2013)

Article Environmental Sciences

Column with CNT/magnesium oxide composite for lead(II) removal from water

Tawfik A. Saleh et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2012)

Article Chemistry, Analytical

Synthesis and high electrochemical capacitance of N-doped microporous carbon/carbon nanotubes for supercapacitor

Ki-Seok Kim et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2012)

Article Chemistry, Physical

Infrared Spectroscopy of Anionic, Cationic, and Zwitterionic Surfactants

Rommel B. Viana et al.

ADVANCES IN PHYSICAL CHEMISTRY (2012)

Article Nanoscience & Nanotechnology

Mechanism of Li Adsorption on Carbon Nanotube-Fullerene Hybrid System: A First-Principles Study

Wonsang Koh et al.

ACS APPLIED MATERIALS & INTERFACES (2011)

Article Thermodynamics

Separation of Succinic Acid from Aqueous Solution by Alumina Adsorption

Ismail Inci et al.

JOURNAL OF CHEMICAL AND ENGINEERING DATA (2011)

Article Biochemistry & Molecular Biology

Kinetic, Equilibrium and Thermodynamic Studies of Cadmium (II) Adsorption by Modified Agricultural Wastes

Zeid A. Al Othman et al.

MOLECULES (2011)

Article Materials Science, Textiles

A new method for preparing alumina nanofibers by electrospinning technology

Weimin Kang et al.

TEXTILE RESEARCH JOURNAL (2011)

Review Chemistry, Multidisciplinary

Nanomaterials in pollution trace detection and environmental improvement

Lide Zhang et al.

NANO TODAY (2010)

Article Engineering, Chemical

Carbon-Modified Alumina and Alumina-Carbon-Supported Hydrotreating Catalysts

S. K. Maity et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2009)

Article Chemistry, Physical

Controlling Single-Walled Carbon Nanotube Surface Adsorption with Covalent and Noncovalent Functionalization

Monica L. Usrey et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2009)

Article Materials Science, Multidisciplinary

Effect of surfactant on the alumina dispersion and corrosion behavior of electroless Ni-P-Al2O3 composite coatings

D. Liu et al.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2009)

Article Agriculture, Multidisciplinary

Arsenic Speciation in Food and Estimation of the Dietary Intake of Inorganic Arsenic in a Rural Village of West Bengal, India

A. J. Signes-Pastor et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2008)

Review Engineering, Environmental

Heavy metal adsorption onto agro-based waste materials: A review

Ayhan Demirbas

JOURNAL OF HAZARDOUS MATERIALS (2008)

Article Environmental Sciences

Environmental costs of mercury pollution

Lars D. Hylander et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2006)

Article Chemistry, Multidisciplinary

Carbon nanotube-conducting-polymer composite nanowires

J Wang et al.

LANGMUIR (2005)

Article Chemistry, Multidisciplinary

Novel strategies for the removal of toxic metals from soils and waters

DM Roundhill

JOURNAL OF CHEMICAL EDUCATION (2004)

Article Chemistry, Physical

Colloidal processing of carbon nanotube/alumina composites

J Sun et al.

CHEMISTRY OF MATERIALS (2002)

Article Engineering, Environmental

Kinetic modeling of liquid-phase adsorption of reactive dyes and metal ions on chitosan

FC Wu et al.

WATER RESEARCH (2001)