Related references
Note: Only part of the references are listed.
Article
Automation & Control Systems
Feiming Liu et al.
Summary: This article proposes a zero-voltage switching modulation scheme with constant switching frequency and simple real-time calculation to minimize the rms inductor current. By using a 2-D look-up table within a small range of input and output voltage, the proposed scheme achieves minimized inductor current. The derived zero-voltage switching conditions are accurate and simple, providing additional assistance in minimizing the rms inductor current.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2023)
Article
Engineering, Electrical & Electronic
Minh Ngo et al.
Summary: Due to increased loss per unit volume in power transformers when operating at higher frequency, the increase in cooling system size can outweigh high-frequency transformer (HFT) size reduction benefits. Conventional air-cooling approach simply adopts oversized cooling fans with high airflow to keep the transformer below a temperature limit, resulting in a large footprint and high power consumption.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2023)
Article
Engineering, Electrical & Electronic
Feng Jin et al.
Summary: Integrated transformer with built-in leakage inductors simplifies the system by integrating discrete leakage inductors into the transformer. This article proposes a matrix integrated transformer with controllable leakage inductance, achieving evenly distributed flux and reduced core loss.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2023)
Article
Engineering, Electrical & Electronic
Zheqing Li et al.
Summary: In this article, an innovative compact transformer structure is proposed to handle medium-voltage insulation. The transformer not only provides medium-voltage insulation but also significantly affects the power density of the module.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2023)
Article
Engineering, Electrical & Electronic
Xingchen Zhao et al.
Summary: This article proposes an ultracompact multifunctional gate driver that integrates the driving circuit, Rogowski coil current sensor, and commutation path for a 211-kW SiC-based three-level propulsion inverter. The optimized commutation path and RCCS provide multiple functions, including suppressing overshoot voltage, ultrafast short-circuit protection, and ac load current sampling. By controlling the electric field of the gate driver through printed circuit board (PCB)-based shielding and shaping, the PD at high altitudes can be eliminated, thus improving power density and reducing insulation risk.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2023)
Article
Engineering, Electrical & Electronic
Yuliang Cao et al.
Summary: The demand for isolated bidirectional dc transformers (DCX) is increasing due to the rapid development of energy storage systems, data center power supplies, and transportation electrification. This article proposes a dual-active synchronization (DAS) modulation for traditional CLLC-DCX to solve power flow and current distortion issues, and introduces a desirable switching transition called Sync-ZVS with zero-voltage switching and load-independent voltage gain. The proposed ACS method and DAS modulation are verified through prototype testing with high efficiency.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2022)
Article
Automation & Control Systems
Jie Fang et al.
Summary: This article proposes a pulsewidth modulation plus phase-shift control scheme to achieve zero-voltage-switching for all the power switches in full input voltage and load range, and minimize the inductor current ripple and root mean square (RMS) value. Experimental results confirm the effectiveness of the proposed control scheme.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2022)
Article
Automation & Control Systems
Lin Tian et al.
Summary: This article introduces the advantages of the four-switch buck-boost (FSBB) converter in dc-dc applications that require step-up and step-down. To reduce the size of the inductor and improve efficiency, various zero-voltage switch (ZVS) control schemes for FSBB with four segments of inductor current have been investigated. Among these schemes, storing the optimized control variable as lookup table data achieves the minimum root-mean-square (RMS) inductor current without complex real-time calculations. However, using an external flash to store the lookup table data for wide input and output voltage ranges leads to significant time consumption for data invocation and affects the dynamic performance. To address this issue, a simplified real-time control algorithm is proposed, dividing the operation into defined Discontinuous Conduction Mode (DCM) and Continuous Conduction Mode (CCM) operation, ensuring minimum RMS inductor current and ZVS operation throughout the voltage range without complex calculations and mode transients. A 300 W dc-dc prototype is also built to verify the theoretical analysis and proposed control scheme using a low-cost real-time digital controller.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2022)
Article
Engineering, Electrical & Electronic
Yuliang Cao et al.
Summary: This article introduces an overall design procedure for a bidirectional soft-switching resonant-type PP converter. A decoupled design method is proposed for the parameters design to simplify the DCXs design. In the hardware design part, a two-direction flux cancellation method and an intraleaving winding structure are proposed to improve the efficiency and power density.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2022)
Article
Engineering, Electrical & Electronic
Yuning Bai et al.
Summary: The inherent limitations of the four-switch buck-boost converter in multimode control and smooth transition are analyzed in this article. A model predictive control method is proposed to achieve multimode control and smooth transition. Experimental results show the effectiveness of the method, and it improves the efficiency by 0.4% compared to traditional four-mode control.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2022)
Proceedings Paper
Energy & Fuels
Yuliang Cao et al.
Summary: This paper proposes a two-stage intelligent power stage (IPS) unit for future grid-interface applications with flexible dc bus. By using a three-level four-switch buck-boost (3-L FSBB) dc-dc converter with fully zero voltage switching (ZVS), zero common-mode (CM) voltage emissions and step-up and step-down voltage gain are achieved. Advanced fiberoptic communication and integrated current and voltage sensors are also implemented for enhanced gate drivers and monitoring.
2022 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE)
(2022)
Proceedings Paper
Energy & Fuels
Yuliang Cao et al.
Summary: This study proposes a 3-level four-switch buck-boost (3L-FSBB) converter for dc-dc applications, and optimizes the design of the coupled inductor and introduces a two-board design to improve efficiency and thermal performance.
2022 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE)
(2022)
Proceedings Paper
Energy & Fuels
Vladimir Mitrovic et al.
Summary: Communication inside a power converter can bring hardware abstraction and flexibility, enabling distributed control. This paper presents an example of a communication protocol developed between gate drivers and a local controller in a unit of a modular multilevel converter.
2022 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE)
(2022)
Proceedings Paper
Automation & Control Systems
Vladimir Mitrovic et al.
Summary: Communication inside a power converter provides hardware abstraction, flexibility, and distributed control. Through communication, the number of sensors in the system can be reduced and the controller hardware can be simplified.
2022 IEEE 23RD WORKSHOP ON CONTROL AND MODELING FOR POWER ELECTRONICS (COMPEL 2022)
(2022)
Article
Engineering, Electrical & Electronic
Qi Liu et al.
Summary: The article proposes an integrated bridge combining a four-switch noninverting buck-boost converter with an LLC resonant converter, enhancing the soft switch capability of the integrated bridge through current accumulation during the dead time, reducing conduction losses through current commutation during the conduction period. The advantages of the integrated bridge make the proposed converter suitable for high-frequency and high-efficiency applications.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2021)
Article
Engineering, Electrical & Electronic
Jian Liu et al.
Summary: This article introduces the hybrid modular multilevel converter (HMMC) family, which can effectively reduce chain-link voltage, improve power density and efficiency. Compared with traditional MMC topologies, HMMC can save more devices, capacitors, and power losses at different medium voltage levels.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2021)
Proceedings Paper
Green & Sustainable Science & Technology
Yuliang Cao et al.
Summary: A simplified time-domain gain model for the CLLC resonant converter was proposed in this paper, based on the superposition principle and energy conservation law, which showed higher accuracy compared to the FHA method and could be used with both resistance and battery load. The boundary conditions between different operation modes in the CLLC converter were also analyzed. The proposed time-domain gain model was verified through simulated and experimental results of a 15 kW prototype.
2021 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE)
(2021)
Proceedings Paper
Green & Sustainable Science & Technology
Yuliang Cao et al.
Summary: This paper introduces a new method of dual-active-synchronization (DAS) modulation to address the issue of bidirectional power flow and current distortion in CLLC-DCX with traditional synchronization rectification (SR), and after studying seven different switching transition types, a Sync-ZVS transition is preferred due to its advantages of ZVS, no deadtime conduction loss, and load-independent voltage transfer ratio.
2021 IEEE ENERGY CONVERSION CONGRESS AND EXPOSITION (ECCE)
(2021)
Proceedings Paper
Engineering, Electrical & Electronic
Yuliang Cao et al.
Summary: This paper proposes an overall design procedure for input-parallel output-series (IPOS) partial power (PP) converter for use in dc distribution converter (DDC) in medium-voltage DC (MVDC) system. The design process is validated through an 18 kW, 500 kHz PP DDC prototype with 98.8% peak efficiency and 142 W/in(3) power density achieved.
2021 IEEE FOURTH INTERNATIONAL CONFERENCE ON DC MICROGRIDS (ICDCM)
(2021)
Proceedings Paper
Energy & Fuels
Minh Ngo et al.
Summary: This paper presents the design of an 18 kW transformer for a bi-directional CLLC resonant dc-dc converter, focusing on reducing leakage inductance and improving current sharing. The designed transformer achieves high efficiency and power density.
2021 THIRTY-SIXTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC 2021)
(2021)
Proceedings Paper
Energy & Fuels
Yuliang Cao et al.
Summary: This research introduces a high-efficiency isolated bi-directional resonant converter with a partial power processing architecture for energy storage systems, achieving high efficiency and power density. By utilizing a low voltage buck regulator for battery interface, the system avoids some issues in traditional designs and improves overall performance.
2021 THIRTY-SIXTH ANNUAL IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION (APEC 2021)
(2021)
Article
Engineering, Electrical & Electronic
Thomas Guillod et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2020)
Article
Engineering, Electrical & Electronic
Yu-Chen Liu et al.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2020)
Article
Engineering, Electrical & Electronic
Jian Liu et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2020)
Article
Engineering, Electrical & Electronic
Zongjie Zhou et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2019)
Article
Engineering, Electrical & Electronic
Kun Xia et al.
IET POWER ELECTRONICS
(2019)
Article
Engineering, Multidisciplinary
Dong Dong et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS
(2018)
Article
Engineering, Electrical & Electronic
Biao Zhao et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2014)
Article
Engineering, Electrical & Electronic
Ping-Ching Huang et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2010)
Article
Engineering, Electrical & Electronic
Stefan Waffler et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2009)
Article
Engineering, Electrical & Electronic
Young-Joo Lee et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2009)
Article
Engineering, Electrical & Electronic
Young-Joo Lee et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2009)
Article
Engineering, Electrical & Electronic
B Sahu et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2004)
