Related references
Note: Only part of the references are listed.
Article
Engineering, Electrical & Electronic
Long Chen et al.
Summary: In this paper, a Bidirectional Staggered Solenoid Structure (BSSS) with high anti-offset performance is proposed for wireless power transfer (WPT) system. A parameter optimization method for the traditional flat solenoid coil (FSC) is proposed to reduce the core volume without compromising the anti-offset ability. The structure's anti-offset performance is analyzed and compared with other coil structures, and the results show that it maintains a high power transfer efficiency even at large offset distances.
JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY
(2023)
Article
Engineering, Electrical & Electronic
Huan Yuan et al.
Summary: This article proposes a novel antioffset interdigital electrode capacitive wireless power transfer system for mobile desktop applications. The coupler consists of two pairs of series connected interdigital electrodes at transmitter side and two copper plates at receiver side, and a detailed generalized design methodology is provided. The system utilizes a switch array to achieve antioffset and maintain stable coupling coefficient at any misalignment distance. No additional position detection sensors are required, simplifying the system and reducing production cost. The experimental results show good agreement with theoretical analysis, indicating the effectiveness of the proposed system.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2023)
Article
Engineering, Electrical & Electronic
Hao Liu et al.
Summary: This study proposes an optimized laminated magnetic coupler (LMC) to improve the performance of wireless charging systems (WCSs) by achieving alignment and stable output without additional control methods. Experimental results demonstrate that the optimized LMC enables high-efficiency constant voltage charging within a certain misalignment range.
JOURNAL OF POWER ELECTRONICS
(2023)
Article
Engineering, Multidisciplinary
Jing Lian et al.
Summary: This article introduces an LCLC-LC compensated CPT charger, which can achieve an efficient charging profile while maintaining nearly unity power factor and soft switching characteristics. The design principle and sensitivity analysis of the CPT charger are discussed, and an experimental prototype is built to verify the analysis.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS
(2022)
Article
Engineering, Electrical & Electronic
Brandon Regensburger et al.
Summary: This article introduces a kilowatt-scale large air-gap capacitive wireless power transfer system for electric vehicle charging that achieves high-power transfer density and high efficiency. The system operates at a multi-MHz frequency and utilizes innovatively designed matching networks to enable effective power transfer. It also utilizes new interleaved-foil air-core coupled inductors to achieve high efficiency. The performance of the interleaved-foil inductors is validated through analytical formulations, finite-element analysis, and measurements. A prototype system utilizing TIF inductors achieves record-breaking performance for a capacitive EV charging system.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2022)
Article
Automation & Control Systems
Yao Wang et al.
Summary: A basic capacitive power transfer topology with series-parallel compensation is developed for load-independent step-up voltage output. The proposed system achieves constant-voltage output and high efficiency.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2022)
Article
Engineering, Electrical & Electronic
Xiaodong Qing et al.
Summary: This article proposes a dual-loop control CPT system to reduce the impact of coupling misalignment and load variation. The frequency tuning is achieved by tracking the input and output voltage, allowing for accurate tracking of the CV frequency and avoiding operation at other resonant frequencies. Experimental results show that the CPT system can operate in a load-independent CC/CV mode and control the output voltage/current within 2% error even with variations in load resistance and coupling misalignment.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2022)
Article
Engineering, Electrical & Electronic
Minghua Zhou et al.
Summary: In this article, a parameter design methodology for high-power and medium-range-distance magnetically coupled resonant wireless power transfer (MCR WPT) applications was proposed to achieve high system efficiency. By building an accurate time-domain system model, designing key parameters, and adopting a double-layer coil configuration and LCCL-TT compensation network, coil losses were reduced, current sharing was achieved, and system efficiency was maximized.
IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION
(2022)
Article
Engineering, Electrical & Electronic
Yipeng Liu et al.
Summary: The proposed interleaved capacitive coupler effectively utilizes coupling space with more plates to achieve the required self- and mutual capacitance and minimize cross coupling effects. This structure also helps reduce the radiative electric field and significantly decrease radiation in high-radiation regions.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2021)
Article
Engineering, Electrical & Electronic
Jianwei Mai et al.
Summary: The article discusses the importance of misalignment tolerance in inductive power transfer systems and proposes conditions for high tolerance compensation topologies. It is proven that proper parameter design can improve misalignment tolerance. The characteristics of impedance and two 300 W prototypes with strong misalignment tolerance are analyzed and verified.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2021)
Article
Engineering, Electrical & Electronic
Xingran Gao et al.
Summary: This article presents the design, analysis, and verification of a new hybrid wireless power transfer system, which achieves high efficiency and space-saving design by simplifying the coupling elements and realizing superposition of inductive and capacitive coupling. The mechanism of efficiency improvement is explained through a detailed analysis of the system's reflected impedance. Experimental results show a 14% increase in efficiency compared to pure inductive power transfer at a 35 cm distance, validating the effectiveness of the proposed system. Moreover, the effects of varying the resonant frequency are investigated to guide practical system design.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2021)
Article
Engineering, Electrical & Electronic
Yu Wu et al.
Summary: This article proposes a parameter design method to improve the dc-dc efficiency of capacitive power transfer systems. By adjusting the external capacitance, the optimal load condition can be achieved, leading to an experimental verification of the effectiveness of the proposed design method.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2021)
Article
Engineering, Electrical & Electronic
Wei Zhou et al.
Summary: A general mutual coupling model for MIMO capacitive coupling interface with self-capacitance and mutual capacitance definitions has been proposed. The model simplifies the analysis of power transfer performance and has been validated through a specific example setup.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2021)
Article
Energy & Fuels
Lantian Li et al.
Article
Engineering, Multidisciplinary
Bo Luo et al.
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS
(2020)
Article
Engineering, Electrical & Electronic
Yang Chen et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2020)
Article
Engineering, Electrical & Electronic
Xiao-Dong Qing et al.
IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS
(2020)
Article
Automation & Control Systems
Zhen Zhang et al.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
(2019)
Article
Engineering, Electrical & Electronic
Lei Zhao et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2019)
Article
Engineering, Electrical & Electronic
Jia-Qi Zhu et al.
IEEE TRANSACTIONS ON POWER ELECTRONICS
(2019)
Article
Engineering, Electrical & Electronic
Ryosuke Hasaba et al.
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES
(2019)
Article
Engineering, Electrical & Electronic
Jongwook Kim et al.
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY
(2019)
Article
Automation & Control Systems
Chenyang Xia et al.
IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY
(2017)
Article
Physics, Nuclear
Gautam Sinha et al.
PHYSICAL REVIEW SPECIAL TOPICS-ACCELERATORS AND BEAMS
(2011)
