☆ 4.4 Article

Fabrication of Bi-2223 Superconducting Joint by Hot-Pressing Process

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2023)

Related references

Note: Only part of the references are listed.

Article Physics, Applied

The effect of intermediate layer densification on the critical current of a Bi-2223 superconducting joint

Y. Takeda et al.

Summary: This study quantitatively investigated the effect of intermediate layer densification on the critical current (Ic) of Bi-2223 superconducting joints. The results showed that pressing the film samples to increase density can enhance the intergrain critical current density (Jc). Additionally, synthesizing an intermediate layer between two Bi-2223 tapes with uniform uniaxial pressure resulted in reproducible superconducting joints with high Ic.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Physics, Applied

Critical current improvement and resistance evaluation of superconducting joint between Bi2223 tapes

Y. Takeda et al.

Summary: By introducing a two-step sintering process, we have improved the critical current of the superconducting joint between Bi2223 tapes, and successfully demonstrated its in-field transport and ultra-low in-field resistance. This study provides an important technological foundation for the development of Bi2223 superconducting magnets.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

Add to Collection

Review Physics, Applied

Review of the temporal stability of the magnetic field for ultra-high field superconducting magnets with a particular focus on superconducting joints between HTS conductors

Y. Takeda et al.

Summary: This article analyzes the temporal magnetic field drift and fluctuations observed in MRI and NMR magnets operating in the driven mode, and explores effective methods for stabilizing the temporal magnetic field fluctuations. In the past decade, significant progress has been made in superconducting joints between high-temperature superconductors, enabling the development of persistent-mode ultra-high field magnets.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Physics, Applied

An efficient approach for superconducting joint of YBCO coated conductors

Daxing Huang et al.

Summary: This research reports an efficient method for superconducting joints of YBCO coated conductors. By etching microchannels in the YBCO layer, the recovery of critical current in the superconducting joint is accelerated, and a dense joining is formed to enable superconducting current path. This technique can promote the persistent current mode operation of 2G HTS magnets in applications such as magnetic resonance imaging and nuclear magnetic resonance.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

In-Field Evaluation of REBCO Superconducting Joint

Kensuke Kobayashi et al.

Summary: We evaluated the joint resistance and current-carrying capacity of the intermediate grown superconducting (iGS) joint at low temperatures and high magnetic fields using a specially developed evaluation system. The results showed that the iGS joint has a sufficiently high current-carrying capacity at 4.2K in a 3T magnetic field and does not exhibit magnetic field dependence. However, at 77K, the joint resistance was relatively high due to a high load factor.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Superconducting Joint Structures For Bi-2212 Wires Using a Powder-in-Tube Technique

Tayebeh Mousavi et al.

Summary: This study focuses on the design and testing of various joint structures for multifilamentary Bi-2212 wires, including step joints, scarf joints, and etched joints. It was found that scarf joints and step joints can carry higher currents compared to etched joints, due to connecting a larger area of exposed filaments without damage. The performance of etched joints is sensitive to etching parameters, making it difficult to develop a reliable jointing process.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2021)

Add to Collection

Article Physics, Applied

Development of a persistent-mode NMR magnet with superconducting joints between high-temperature superconductors

Y. Yanagisawa et al.

Summary: This paper describes the first persistent-mode medium magnetic field nuclear magnetic resonance (NMR) magnet using superconducting joints between high-temperature superconductors (HTS), aiming to develop a high-resolution NMR magnet. By developing superconducting joints between HTSs and HTSs/LTSs, the authors have successfully demonstrated a magnet that functions properly in a high-resolution NMR system.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Development of a Superconducting Joint Resistance Evaluation System

Kensuke Kobayashi et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

Add to Collection

Article Physics, Applied

High Ic superconducting joint between Bi2223 tapes

Yasuaki Takeda et al.

APPLIED PHYSICS EXPRESS (2019)

Add to Collection

Article Physics, Applied

Superconducting joint between multi-filamentary Bi2Sr2Ca2Cu3O10+δ tapes based on incongruent melting for NMR and MRI applications

Xinzhe Jin et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Physics, Applied

Development of high Jc Bi2223/Ag thick film materials prepared by heat treatment under low PO2

Y. Takeda et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Physics, Applied

Development of a persistent superconducting joint between Bi-2212/Ag-alloy multifilamentary round wires

Peng Chen et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Electrical Resistance Measurement Method to Investigate Superconducting Joints in Bi-2223 Tape

Yuta Ebara et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2017)

Add to Collection

Article Physics, Applied

Fabrication, microstructure and persistent current measurement of an intermediate grown superconducting (iGS) joint between REBCO-coated conductors

K. Ohki et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)

Add to Collection

Article Physics, Applied

First performance test of a 25 T cryogen-free superconducting magnet

Satoshi Awaji et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Successful Upgrading of 920-MHz NMR Superconducting Magnet to 1020 MHz Using Bi-2223 Innermost Coil

Gen Nishijima et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2016)

Add to Collection

Review Physics, Applied

Persistent current joints between technological superconductors

G. D. Brittles et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2015)

Add to Collection

Article Materials Science, Multidisciplinary

A superconducting joint for GdBa2Cu3O7 -δ-coated conductors

Yeonjoo Park et al.

NPG ASIA MATERIALS (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Synthesis of Bi2223 by Low PO2 Sintering

Ryosuke Tajima et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2013)

Add to Collection

Article Instruments & Instrumentation

Transport critical current measurement apparatus using liquid nitrogen cooled high-Tc superconducting magnet with variable temperature insert

G. Nishijima et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2013)

Add to Collection

Review Physics, Applied

Present Status and Future Perspective of Bismuth-Based High-Temperature Superconducting Wires Realizing Application Systems

Ken-ichi Sato et al.

JAPANESE JOURNAL OF APPLIED PHYSICS (2012)

Add to Collection

Article Physics, Applied

Fabrication of joint Bi-2223/Ag superconducting tapes with BSCCO superconducting powders by diffusion bonding

Wei Guo et al.

PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2010)

Add to Collection

Article Physics, Applied

Review of overpressure processing Ag-sheathed (Bi, Pb)2Sr2Ca2Cu3Ox wire

EE Hellstrom et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2005)

Add to Collection

Article Engineering, Electrical & Electronic

The origin of the Pb-rich Bi3Sr2Ca2Cu1Ox (3221) phase during post annealing of (Bi, Pb)2Sr2Ca2Cu3Ox/Ag composite conductors

Y Yuan et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2005)

Add to Collection

Article Physics, Applied

Effect of hot uniaxial pressing on the microstructure and critical current density of (Bi, Pb)-2223 tapes

H Fujii et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2004)

Add to Collection

Article Physics, Applied

Development of high performance Ag sheathed Bi2223 wire

T Kato et al.

PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2004)

Add to Collection

Article Physics, Applied

Through-process study of factors controlling the critical current density of Ag-sheathed (Bi,Pb)2Sr2Ca2Cu3Ox tapes

J Jiang et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.