4.4 Article

AC Loss Reduction in HTS Coil Windings Coupled With an Iron Core

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Experimental and numerical study on AC loss reduction in a REBCO coil assembly by applying high saturation field powder-core flux diverters

Shuangrong You et al.

Summary: AC loss is a key issue in designing HTS devices. The use of magnetic flux diverters (MFDs) in close proximity to HTS coil windings is an effective method for reducing AC loss. Two types of low-loss powder-core MFDs - high flux (HF) and molypermalloy-powder (MPP) MFDs - were applied in a REBCO coil assembly, resulting in a significant reduction of total loss.

CRYOGENICS (2022)

Article Engineering, Electrical & Electronic

Design, Fabrication and Test of a 1.5 T Cryogen-Free HTS Dipole Magnet for the Heavy Ion Spectrometer

Yuquan Chen et al.

Summary: A 1.5 T high-temperature superconducting (HTS) dipole magnet has been fabricated and tested. It consists of four HTS coils and a warm iron yoke, generating a central field of 1.5 T at an operation current of 280 A.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)

Article Engineering, Electrical & Electronic

AC Loss Simulation in HTS Coil Windings Coupled With an Iron Core

Yue Wu et al.

Summary: In this study, 3D FEM simulations were conducted to analyze the AC loss in Superferric magnets composed of HTS coil windings and iron cores. The results showed that the iron core increased the AC loss in the DPC assemblies, and the increase was positively correlated with the number of DPCs.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2022)

Article Physics, Applied

3D homogenization of the T-A formulation for the analysis of coils with complex geometries

Carlos Roberto Vargas-Llanos et al.

Summary: The modeling and analysis of superconducting coils are crucial in designing devices based on high-temperature superconductors. 2D finite element analysis is commonly used, but it cannot accurately represent complex operating conditions. In this study, a 3D homogenization method using the T-A formulation is proposed for analyzing superconducting coils with complex geometries to overcome the limitations of the 2D approach.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2022)

Article Physics, Applied

Advanced electromagnetic modeling of large-scale high-temperature superconductor systems based on H and T-A formulations

Edgar Berrospe-Juarez et al.

Summary: The development of high-temperature superconductors has allowed for the emergence of diverse superconductor devices, including large-scale HTS systems. Traditional finite element methods and the newly proposed T-A formulation have been used to address electromagnetic issues, and when combined with homogenization and multi-scaling methods, they can reduce the required computational resources.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2021)

Article Engineering, Electrical & Electronic

Reduction of AC Loss in HTS Coils of Superferric Magnets for Rapid-Cycling Synchrotrons by Changing Cross-Section of Coils and Iron Yoke Geometry

Yang Li et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

Article Engineering, Electrical & Electronic

Numerical Study on AC Loss of an HTS Coil Placed on Laminated Silicon Steel Sheets With Distorted AC Transport Currents

Xiaoyong Xu et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2020)

Article Engineering, Electrical & Electronic

Design of a single-phase 6.5 MVA/25 kV superconducting traction transformer for the Chinese Fuxing high-speed train

Wenjuan Song et al.

INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2020)

Article Physics, Applied

Real-time simulation of large-scale HTS systems: multi-scale and homogeneous models using the T-A formulation

Edgar Berrospe-Juarez et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2019)

Article Engineering, Electrical & Electronic

AC Losses in HTS Coils of Superferric Dipole and Combined-Function Magnets for Rapid-Cycling Synchrotrons

Yusuke Sogabe et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2019)

Article Engineering, Electrical & Electronic

AC Loss Characteristics in REBCO Coil Assemblies With Different Geometries and Conductors

Yusuke Sogabe et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2018)

Article Physics, Applied

An efficient 3D finite element method model based on the T-A formulation for superconducting coated conductors

Huiming Zhang et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2017)

Article Engineering, Electrical & Electronic

Numerical Simulation and Analysis of a Saturated-Core-Type Superconducting Fault Current Limiter

Yuelong Jia et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2017)

Article Engineering, Electrical & Electronic

Simulation of AC Loss in Small HTS Coils With Iron Core

Lingfeng Lai et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2015)

Article Engineering, Electrical & Electronic

Design, Construction, and Test Arrangement of a Fast-Cycling HTS Accelerator Magnet

Henryk Piekarz et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2014)

Article Engineering, Electrical & Electronic

Increasing Energy Efficiency of Saturated-Core Fault Current Limiters With Permanent Magnets

Jonathan C. Knott et al.

IEEE TRANSACTIONS ON MAGNETICS (2013)

Article Physics, Applied

AC loss in ReBCO pancake coils and stacks of them: modelling and measurement

E. Pardo et al.

SUPERCONDUCTOR SCIENCE & TECHNOLOGY (2012)

Article Physics, Applied

Transport current losses in HoBaCuO-123 coated conductors with a Ni-alloy substrate

O Tsukamoto et al.

PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS (2005)

Article Engineering, Electrical & Electronic

Status of high temperature superconductor magnet R&D at BNL

R Gupta et al.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2004)