☆ 4.7 Article

In Situ Monitoring of Melt Pool and Signal Modification in Laser Powder Bed Fusion

IEEE SENSORS JOURNAL (2023)

Related references

Note: Only part of the references are listed.

Article Computer Science, Artificial Intelligence

In-situ monitoring laser based directed energy deposition process with deep convolutional neural network

Jiqian Mi et al.

Summary: This paper presents a new image recognition system based on a deep convolutional neural network for quality monitoring of L-DED processed parts. The system utilizes lightweight architectures to reduce detection time and improves accuracy through the enhancement of the penalty function.

JOURNAL OF INTELLIGENT MANUFACTURING (2023)

Add to Collection

Article Optics

Effect of axial static magnetic field on microstructure evolution, performance, and melt pool signals of AlSi10Mg fabricated by laser powder bed fusion

Hanxiang Zhou et al.

Summary: Static magnetic field (SMF) assisted laser powder bed fusion (LPBF) has the potential to improve the mechanical properties of AlSi10Mg parts, mainly by increasing relative density and refining the microstructure. The mechanism of the magnetic field within the melt pool is still unknown. In-situ monitoring technology provides valuable information about the melt pool area, temperature gradient, radiation emission, and spatters, enhancing understanding of the SMF-assisted LPBF process.

OPTICS AND LASER TECHNOLOGY (2023)

Add to Collection

Article Engineering, Industrial

Motion feature based melt pool monitoring for selective laser melting process

Xin Lin et al.

Summary: The research highlights the importance of melt pool monitoring in the SLM process and introduces new motion features to accurately describe the variation of melt pool. By using clustering algorithm, the link between melt pool states and processing parameters is established for quality control purposes.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Engineering, Manufacturing

Differentiation of materials and laser powder bed fusion processing regimes from airborne acoustic emission combined with machine learning

Rita Drissi-Daoudi et al.

Summary: This study investigates the use of a low-cost microphone combined with state-of-the-art machine learning algorithms as online process monitoring for differentiating materials and process regimes in Laser-Powder Bed Fusion (LPBF). The study demonstrates that the acoustic emission (AE) features are related to the laser-material interaction, and a single model can accurately classify different process regimes and materials. By using a Convolutional Neural Network (CNN) with a multi-label architecture, a very high classification accuracy can be achieved for both materials and process regimes. This research shows the potential of our approaches for online LPBF process monitoring of different materials and regimes.

VIRTUAL AND PHYSICAL PROTOTYPING (2022)

Add to Collection

Review Engineering, Manufacturing

Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg

Lv Zhao et al.

Summary: This review article summarizes the recent progress in the characterization of microstructure, assessment of strengthening and damage mechanisms, and evaluation of fracture and fatigue resistance of LPBF Al alloys. It aims to build a comprehensive link between mechanical performance and microstructure and provides an outlook on further efforts needed to maximize the potential of mechanical performance through optimizing microstructure.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Application of an improved variational mode decomposition algorithm in leakage location detection of water supply pipeline

Juan Li et al.

Summary: An improved adaptive VMD method is proposed in this paper, which can adaptively determine the quadratic penalty item a for each BLIMF based on the frequency characteristics of the signal. The energy loss coefficient and the correlation of adjacent BLIMFs are used as evaluation indices to determine the best number of modes K. This method significantly improves the accuracy of leak location in water pipelines.

MEASUREMENT (2021)

Add to Collection

Article Acoustics

Novel self-adaptive vibration signal analysis: Concealed component decomposition and its application in bearing fault diagnosis

Prashant Tiwari et al.

Summary: This paper proposes a novel signal processing method called Concealed Component Decomposition (CCD) for developing a precise bearing fault diagnosis model, which has been validated over different simulated and experimental datasets of different fault types, demonstrating its superiority over other existing signal decomposition approaches.

JOURNAL OF SOUND AND VIBRATION (2021)

Add to Collection

Article Engineering, Manufacturing

A method for objectively evaluating the defect detection performance of in-situ monitoring systems

Henry C. de Winton et al.

Summary: In this study, a methodology and set of metrics are proposed for the objective comparison of in-situ monitoring systems in additive manufacturing processes. The comparison between photodiodes and high-speed cameras showed that the camera-based system offers a better trade-off between detection and false alarms in detecting part-wide porosity increases.ROC and POD curves were used to quantify the detection capabilities of the two systems, with the camera-based system outperforming the photodiode system in most cases.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Physics, Applied

Thermoelectric Magnetohydrodynamic Model for Laser-Based Metal Additive Manufacturing

Lu Wang et al.

Summary: The application of magnetic fields in metal additive manufacturing can control the dynamics of the molten pool and dendritic morphology. Studies have shown that external magnetic fields can damp keyhole fluctuations, smooth fluid flow fields in the molten pool, and increase the ratio of equiaxed grains in the solidification front.

PHYSICAL REVIEW APPLIED (2021)

Add to Collection

Article Multidisciplinary Sciences

Controlling interdependent meso-nanosecond dynamics and defect generation inmetal 3D printing

Saad A. Khairallah et al.

SCIENCE (2020)

Add to Collection

Article Computer Science, Artificial Intelligence

Fault diagnosis of rolling bearing of wind turbines based on the Variational Mode Decomposition and Deep Convolutional Neural Networks

Zifei Xu et al.

APPLIED SOFT COMPUTING (2020)

Add to Collection

Article Geosciences, Multidisciplinary

Noise suppression for magnetotelluric using variational mode decomposition and detrended fluctuation analysis

Jin Li et al.

JOURNAL OF APPLIED GEOPHYSICS (2020)

Add to Collection

Article Engineering, Industrial

Temperature determination in laser welding based upon a hyperspectral imaging technique

Tobias Staudt et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Engineering, Mechanical

Underdetermined blind separation of bearing faults in hyperplane space with variational mode decomposition

Guozheng Li et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

Add to Collection

Article Engineering, Mechanical

Adaptive variational mode decomposition method for signal processing based on mode characteristic

Jijian Lian et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Additive manufacturing of metallic components - Process, structure and properties

T. DebRoy et al.

PROGRESS IN MATERIALS SCIENCE (2018)

Add to Collection

Article Engineering, Manufacturing

Melt pool temperature and cooling rates in laser powder bed fusion

Paul A. Hooper

ADDITIVE MANUFACTURING (2018)

Add to Collection

Article Engineering, Mechanical

Research on variational mode decomposition in rolling bearings fault diagnosis of the multistage centrifugal pump

Ming Zhang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2017)

Add to Collection

Article Engineering, Manufacturing

Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi 10Mg composites

Donghua Dai et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

Add to Collection

Article Optics

A 3D shape retrieval method for orthogonal fringe projection based on a combination of variational image decomposition and variational mode decomposition

Biyuan Li et al.

OPTICS AND LASERS IN ENGINEERING (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Filter bank property of variational mode decomposition and its applications

Yanxue Wang et al.

SIGNAL PROCESSING (2016)

Add to Collection

Article Engineering, Mechanical

Research on variational mode decomposition and its application in detecting rub-impact fault of the rotor system

Yanxue Wang et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Variational Mode Decomposition

Konstantin Dragomiretskiy et al.

IEEE TRANSACTIONS ON SIGNAL PROCESSING (2014)

Add to Collection

Article Automation & Control Systems

In situ quality control of the selective laser melting process using a high-speed, real-time melt pool monitoring system

S. Clijsters et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Geochemistry & Geophysics

Quantitative Identification of Near-Fault Pulse-Like Ground Motions Based on Energy

Changhai Zhai et al.

BULLETIN OF THE SEISMOLOGICAL SOCIETY OF AMERICA (2013)

Add to Collection

Article Engineering, Industrial

Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: Effect of processing conditions and powder properties

E. O. Olakanmi

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)

Add to Collection

Article Automation & Control Systems

Study on energy input and its influences on single-track,multi-track, and multi-layer in SLM

Wang Di et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Thermoelectric currents in laser induced melts pools

Adrian Lange et al.

JOURNAL OF LASER APPLICATIONS (2009)

Add to Collection

Article Mathematics, Interdisciplinary Applications

ENSEMBLE EMPIRICAL MODE DECOMPOSITION: A NOISE-ASSISTED DATA ANALYSIS METHOD

Zhaohua Wu et al.

ADVANCES IN DATA SCIENCE AND ADAPTIVE ANALYSIS (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.