☆ 4.7 Article

Fabrication of High-Temperature Polymer- Derived Ceramic Thin-Film Heat Flux Sensor by 3-D Printing and Laser Pyrolysis

IEEE SENSORS JOURNAL (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Additive manufacturing of flexible polymer-derived ceramic matrix composites

Jun Ou et al.

Summary: In this study, an ultraviolet light-curable preceramic polymer slurry was developed for digital light processing printing of flexible green parts in designed shapes. These parts were transformed into complex structures using an assisted secondary molding strategy, and the collapse of bulk pyrolyzed parts was avoided by impregnating their precursors with silicon nitride particles. The composites with 10 wt.% Si3N4 exhibited a bending strength of 130.61 +/- 16.01 MPa and a Vickers hardness of 6.43 +/- 0.12 GPa.

VIRTUAL AND PHYSICAL PROTOTYPING (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Rapid Printing of High-Temperature Polymer-Derived Ceramic Composite Thin-Film Thermistor with Laser Pyrolysis

Guicai Fang et al.

Summary: This work introduces a rapid and flexible method of using laser pyrolysis combined with direct ink writing process for printing double-layer high-temperature antioxidant polymer-derived ceramic (PDC) thin-film thermistors. The PDC composite antioxidant layer effectively prevents oxygen intrusion and exhibits high-temperature stability with a low resistance change. The electrical behavior of the thermistor is in agreement with the Mott's variable range hopping mechanism, and the feasibility of the thermistor on the surface of high-temperature components, such as an aeroengine blade, is demonstrated.

ACS APPLIED MATERIALS & INTERFACES (2023)

Add to Collection

Article Materials Science, Ceramics

Processing and 3D printing of SiCN polymer-derived ceramics

Mohammadreza Mahmoudi et al.

Summary: Preceramic polymer resins are ideal for 3D printing ceramic components, and the outcomes of the process strongly depend on parameters like catalyst concentration and cross-linking duration, affecting ceramic density and yield. Thermal analysis and FTIR are used to quantify these relationships and determine the best parameters for 3D printing PDC components, providing guidelines for future additive manufacturing of PDCs.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2022)

Add to Collection

Review Materials Science, Ceramics

Advances in ultra-high temperature ceramics, composites, and coatings

Dewei Ni et al.

Summary: Ultra-high temperature ceramics (UHTCs) have ultra-high melting points, outstanding mechanical properties, and ablation resistance at elevated temperatures, making them promising materials for structural applications in extreme environments such as rockets and hypersonic vehicles. The development of high-entropy UHTCs is an emerging direction for ultra-high temperature materials.

JOURNAL OF ADVANCED CERAMICS (2022)

Add to Collection

Article Materials Science, Ceramics

Electrically conductive silicon oxycarbide thin films prepared from preceramic polymers

Emmanuel I. I. I. Ricohermoso et al.

Summary: This study focuses on the preparation and characterization of silicon oxycarbide thin films, optimizing the deposition process using the Taguchi method. It was found that increasing carbon content is beneficial for crack-free film preparation and resulting ceramic films have higher electrical conductivity, suitable for use in miniaturized piezoresistive strain gauges.

INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2022)

Add to Collection

Article Nanoscience & Nanotechnology

In Situ Laser Fabrication of Polymer-Derived Ceramic Composite Thin-Film Sensors for Harsh Environments

Lida Xu et al.

Summary: This study proposes a novel method of rapid in situ fabrication of polymer-derived ceramic (PDC) composite thin-film sensors by laser pyrolysis, which can quickly obtain a sensitive PDC composite film layer with high-quality graphite and is more flexible and efficient compared to traditional furnace thermolysis. The reaction differences between laser pyrolysis and furnace thermolysis are also analyzed. The approach pioneers the in situ laser fabrication of functional PDC films for sensors and shows great potential for in situ sensing of complex curved surfaces in harsh environments.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Electrical & Electronic

High-Sensitive Thin Film Heat Flux Gauge With ITO/In2O3 Thermopile on Nickel Alloys for Turbine Blade Applications

Xin Li et al.

Summary: Heat flux is a key parameter for evaluating the heat dissipation of turbine blade. This paper presents an innovative design of a thin film heat flux gauge with a membrane structure on nickel alloys, enabling in-situ surface heat flux measurement. The sensor utilizes an ITO/In2O3 thermopile to improve sensitivity. Experimental results demonstrate the high sensitivity and response frequency of the sensor, indicating its potential in optimizing cooling systems in aeronautics and astronautics.

IEEE SENSORS JOURNAL (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

Laser pyrolysis in papers and patents

Christian Spreafico et al.

Summary: This paper presents a critical review of laser pyrolysis, analyzing a representative pool of scientific papers and patents from the last 20 years to understand the efforts spent on improving this technology. The study showed that the main use of laser pyrolysis is to produce nanoparticles and coatings, mainly working with silicon and carbon dioxide materials for catalysts activity and electrical conductivity. CO2 lasers are the most commonly used and versatile compared to others. Additionally, the technology has been developed in various sizes and processes, leading to a wide range of results and stimulating new areas of experimentation in recent years, such as biomedical applications, additive manufacturing, and waste disposal.

JOURNAL OF INTELLIGENT MANUFACTURING (2022)

Add to Collection

Article Materials Science, Ceramics

Thin-film temperature sensor made from particle-filled polymer-derived ceramics pyrolyzed in vacuum

Zaifu Cui et al.

Summary: This study proposes the pyrolysis of polymer-derived ceramics (PDC) thin films in vacuum to solve the oxidation issue and verifies its application in high-temperature sensors. It provides a feasible method for the fabrication of high-temperature PDC thin-film sensors.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Chemistry, Physical

An anti-oxidative coating made from particle-filled SiCN precursor for applications up to 800 °C

Zaifu Cui et al.

Summary: Thin-film sensors have advantages over bulk sensors in high-temperature applications, but oxidation at high temperatures can affect their reliability. This study proposes a thin-film anti-oxidative coating based on polymer-derived ceramics, which can effectively protect the sensor from oxidation in temperatures ranging from room temperature to 800 degrees C.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Review Crystallography

Polymer-Derived Ceramics Technology: Characteristics, Procedure, Product Structures, and Properties, and Development of the Technology in High-Entropy Ceramics

Jiabei He et al.

Summary: The traditional preparation of ceramic materials is time-consuming and expensive, limiting their application in various industries. The advent of polymer-derived ceramics technology has enabled the application of ceramics to a wider range including fibers, composites, coatings, and films. This paper reviews the progress in polymer-derived ceramics technology and its recent development in high-entropy ceramics.

CRYSTALS (2022)

Add to Collection

Article Materials Science, Ceramics

Electrical property of joints made of polymer-derived SiAlCN ceramic via adhesive joining

Yigao Chen et al.

Summary: The electrical properties of joints made with polymer-derived silicoaluminum carbonitride (SiAlCN) ceramics were investigated, showing successful preparation of high-strength joints. The DC and AC conductivity measurements in a temperature range revealed unique conductive behavior, compared to free SiAlCN ceramics, indicating the potential practical application in high-temperature sensors.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Polymer-derived ceramic thin-film temperature sensor

Zaifu Cui et al.

Summary: This work successfully addresses the monitoring challenges of machines in harsh environments by fabricating an ultra-thin-film temperature sensor, providing a new solution for aerospace applications.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

Add to Collection

Article Materials Science, Ceramics

Low/intermediate temperature pyrolyzed polysiloxane derived ceramics with increased carbon for electrical applications

Michelle Greenough et al.

Summary: This study investigates the chemistry, thermal stability, and electrical conductivity of polysiloxane derived ceramics under low/intermediate pyrolysis temperature conditions. The addition of carbon from divinylbenzene was found to enhance the electrical conductivity, surpassing previously reported values for similar ceramics.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Review Instruments & Instrumentation

A review on thin film fast response heat transfer gauges

Tanweer Alam et al.

Summary: This paper summarizes various research investigations on fast response gauges for short duration measurement in transient state. It focuses on the development, application, and methods of heat estimation from measured transient temperature history using thin-film gauge, categorizing applications in engineering systems. The review also discusses heat flux measurement techniques, trends in heat transfer gauges, and estimation of heat transfer rate from transient temperature data.

REVIEW OF SCIENTIFIC INSTRUMENTS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Design, fabrication and characterization of high temperature thin film heat flux sensors

Congchun Zhang et al.

MICROELECTRONIC ENGINEERING (2019)

Add to Collection

Article Materials Science, Ceramics

The stability and repeatability of high temperature electrical properties of SiAlCN ceramic sensor heads

Yongdong Yu et al.

CERAMICS INTERNATIONAL (2019)

Add to Collection

Review Materials Science, Ceramics

Organosilicon polymer-derived ceramics: An overview

Shengyang Fu et al.

JOURNAL OF ADVANCED CERAMICS (2019)

Add to Collection

Article Materials Science, Ceramics

Preparation and temperature-resistance characteristics of novel dense SiAlCN ceramics

Yongdong Yu et al.

CERAMICS INTERNATIONAL (2018)

Add to Collection

Article Thermodynamics

Effects of rear slant angles on the flow characteristics of Ahmed body

Tural Tunay et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2014)

Add to Collection

Article Thermodynamics

Jet impingement in a crossflow configuration: Convective boiling and local heat transfer characteristics

Geehong Choi et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2014)

Add to Collection

Article Thermodynamics

Flow boiling heat transfer and pressure drop of water in a plate heat exchanger with corrugated channels at low mass flux conditions

Eungchan Lee et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Thermodynamics

Local wall heat flux in confined thermal convection

Robert Kaiser et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Materials Science, Ceramics

Effect of pyrolysis temperature on the electric conductivity of polymer-derived silicoboron carbonitride

Yaohan Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Temperature sensor made of polymer-derived ceramics for high-temperature applications

Ran Zhao et al.

SENSORS AND ACTUATORS A-PHYSICAL (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Fabrication and electrical properties of polymer-derived ceramic (PDC) thin films for high-temperature heat flux sensors

Duckbong Seo et al.

SENSORS AND ACTUATORS A-PHYSICAL (2011)

Add to Collection

Article Thermodynamics

Underhood thermal management: Temperature and heat flux measurements and physical analysis

Mahmoud Khaled et al.

APPLIED THERMAL ENGINEERING (2010)

Add to Collection

Article Engineering, Multidisciplinary

Fast response surface temperature sensor for hypersonic vehicles

H. A. Mohammed et al.

INSTRUMENTS AND EXPERIMENTAL TECHNIQUES (2010)

Add to Collection

Article Thermodynamics

In situ High Temperature Heat Flux Sensor Calibration

Clayton A. Pullins et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2010)

Add to Collection

Article Thermodynamics

Durable Heat Flux Sensor for Extreme Temperature and Heat Flux Environments

Andrew R. Gifford et al.

JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Modeling and fabrication of thin film thermopile sensor

Jung-Kyun Kim et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2009)

Add to Collection

Article Materials Science, Ceramics

Effect of Thermal Initiator Concentration on the Electrical Behavior of Polymer-Derived Amorphous Silicon Carbonitrides

Yansong Wang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)

Add to Collection

Article Nanoscience & Nanotechnology

Polymer-derived SiAlCN ceramics resist oxidation at 1400 °C

Yiguang Wang et al.

SCRIPTA MATERIALIA (2006)

Add to Collection

Article Materials Science, Ceramics

Electrical conductivity measurements as a microprobe for structure transitions in polysiloxane derived Si-O-C ceramics

J Cordelair et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.