☆ 4.7 Article

Lignin meets MOFs: Design of spherical carbon-based NiCo catalysts for catalytic hydrogen transfer of 5-hydroxymethylfurfural to 5-methylfurfuryl alcohol

FUEL PROCESSING TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Review Engineering, Environmental

A review of bio-refining process intensification in catalytic conversion reactions, separations and purifications of hydroxymethylfurfural (HMF) and furfural

Jernej Slak et al.

Summary: This review explores the utilization of process intensification (PI) techniques in the biorefining industry for 5-HMF and FUR production and purification, highlighting the potential of reactive extraction in microreactors and other approaches. While mineral acid-catalyzed aqueous systems yield the highest product yields, their purification and recycling are costly and laborious. Solid-acid catalysts in biphasic solvent systems show promise, with NaCl improving extraction power and selectivity. The pervaporation assisted continuous membrane reactor holds potential for large-scale FUR production.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Furfural and 5-(hydroxymethyl)furfural valorization using homogeneous Ni(0) and Ni(II) catalysts by transfer hydrogenation

Tamara Jurado-Vazquez et al.

Summary: This study utilized the complex [dippeNi(COD)] as a catalytic precursor to achieve high yields in the valorization of furfural and 5-(hydroxymethyl)furfural. Additionally, it is the first report of reductive amination of FF using a homogeneous Ni catalyst in a hydrogen transfer protocol.

JOURNAL OF ORGANOMETALLIC CHEMISTRY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Hydrogenolysis of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran Over a Modified CoAl-Hydrotalcite Catalyst

Jing Xia et al.

Summary: A novel mixed metal oxide catalyst was prepared and applied for the hydrogenolysis of 5-hydroxymethylfurfural to 2,5-dimethylfuran. The CuCoNiAl-MMO catalyst exhibited high initial activity and selectivity under relatively mild reaction conditions. Characterization studies revealed the structural features of the catalyst surface have important implications for selective DMF synthesis.

FRONTIERS IN CHEMISTRY (2022)

Add to Collection

Article Chemistry, Physical

Strategic Design of a WO3/PdOx-Carbon Shell Composite Photocatalyst: Visible Light-Mediated Selective Hydrogenation of 5-Hydroxymethylfurfura

Alok Kumar et al.

Summary: In this study, an efficient WO3/PdOx-carbon shell composite photocatalyst was synthesized and used for visible light-assisted selective hydrogenation of 5-hydroxymethylfurfural. The catalyst showed high activity and selectivity, producing 5-bis(hydroxymethyl)furan, which is a valuable feedstock for polymer industries. The pH range of the reaction medium was found to have a significant influence on the conversion efficiency and selectivity. The photocatalyst exhibited excellent stability and reusability for multiple cycles.

ACS APPLIED ENERGY MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Cu-Based Nanoparticles as Catalysts for Selective Hydrogenation of Biomass-Derived 5-Hydroxymethylfurfural to 1,2-Hexanediol

Yuewen Shao et al.

Summary: Cu-based nanocatalysts derived from Mg-Al layered double hydroxides were used to catalyze the conversion of HMF to 1,2-HDO. The introduction of Mg species facilitated the formation of Cu nanoparticles with a smaller size, mesoporous structures, abundant basic sites, and more surface area of metallic Cu sites, resulting in superior catalytic behavior and reusability.

ACS APPLIED NANO MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Carbon-Supported Ag Nanoparticle Aerogel for Electrocatalytic Hydrogenation of 5-(Hydroxymethyl)furfural to 2,5-Hexanedione Under Acidic Conditions

Sonali Panigrahy et al.

Summary: There is a growing interest in the electrochemical conversion of biomass-derived compounds due to the high sustainability and potential for generating value-added products and renewable electricity. In this study, a carbon-supported silver nanoparticle aerogel was synthesized and used as a catalyst for the electrocatalytic hydrogenation of 5-(hydroxymethyl)furfural. The conversion of furfural to hexanedione was demonstrated using ambient pressure and temperature, eliminating the need for high pressure and temperature. The results showed high Faradic efficiency and selectivity for the conversion of furfural to hexanedione under certain conditions.

ACS APPLIED NANO MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

A unique Co@CoO catalyst for hydrogenolysis of biomass-derived 5-hydroxymethylfurfural to 2,5-dimethylfuran

Shuang Xiang et al.

Summary: The authors report a unique core-shell structured Co@CoO catalyst which shows excellent performance in the hydrogenolysis and deoxygenation reactions of biomass-derived compounds. This study reveals the great potential of simple metal-oxide-based catalysts for the conversion of renewable biomass into chemical feedstocks.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Engineering Pore Nanostructure of Carbon Cathodes for Zinc Ion Hybrid Supercapacitors

Wenbin Jian et al.

Summary: Zinc ion hybrid supercapacitors (ZIHCs) have great potential for energy storage applications due to their high power density and energy density. However, the large radius of hydrated Zn2+ ions hinders their efficient storage in micropores with limited sizes, resulting in limited specific capacitance and rate capability of ZIHCs. Therefore, understanding the extent to which pore size influences the storage of hydrated Zn2+ ions in small pores is crucial.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Selective hydrodeoxygenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) over carbon supported copper catalysts using isopropyl alcohol as a hydrogen donor

Yung Wei Hsiao et al.

Summary: In this study, a simple and green pathway for the hydrodeoxygenation of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) using copper catalyst and isopropyl alcohol (IPA) was revealed. The density functional theory calculations showed that the Cu(211) facet had a higher proportion in nanosized catalysts and exhibited a lower energy barrier for the dehydrogenation of IPA. The experimental results demonstrated that the Cu/PBSAC catalyst achieved a conversion of 91.9% for HMF and a selectivity of 71.7% for DMF in a 6-hour batch reaction at 190 degrees C, with a DMF yield of over 96% in 10 hours. Moreover, the mechanical strength of the carbon support was ideal for continuous processing, achieving a DMF yield of over 90% at a weight hourly space velocity (WHSV) of 2.4 hr.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Chemistry, Applied

Bimetallic platinum/iridium modified mesoporous catalysts applied in the hydrogenation of HMF

Brenda Ledesma et al.

Summary: The study investigated the catalytic transformation of HMF to produce 2,5-DMF over bimetallic (PtIr) and monometallic (Pt) catalysts supported on CMK-3 and SBA-15 mesoporous materials. It was found that PtIr-CMK-3 catalyst exhibited excellent activity, selectivity, and stability in this process, with well-reduced and highly dispersed metallic particles on the surface of supports having large surface area and narrow pore size distribution. The PtIr alloy species catalytic sites were very active and selective towards the formation of 2,5-DMF.

CATALYSIS TODAY (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Environmentally-friendly and sustainable synthesis of bimetallic NiCo-based carbon nanosheets for catalytic cleavage of lignin dimers

Changzhou Chen et al.

Summary: This study successfully synthesized ultra-thin metal-based carbon nanosheets via a template method and characterized their structure and properties. The use of environmentally-friendly materials and methods in the synthesis process led to highly efficient catalytic reactions and significantly increased product yields.

INORGANIC CHEMISTRY COMMUNICATIONS (2021)

Add to Collection

Article Multidisciplinary Sciences

Selective hydrogenation of 5-(hydroxymethyl)furfural to 5-methylfurfural over single atomic metals anchored on Nb2O5

Shaopeng Li et al.

Summary: This study demonstrates that isolated single atomic catalysts can efficiently catalyze the selective hydrogenation of HMF to MF using H2 as the reductant, with a selectivity of >99% at complete conversion of HMF.

NATURE COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Physical

Synergistic catalytic hydrogenation of furfural to 1,2-pentanediol and 1,5-pentanediol with LDO derived from CuMgAl hydrotalcite

Xiaomin Fu et al.

Summary: In this study, a series of layer double metal oxides were prepared from CuMgAl hydrotalcite precursors by urea decomposition. The as-prepared samples were characterized and found to exhibit excellent catalytic properties in the selective hydrogenolysis of furfural to 1,2-pentanediol and 1,5-pentanediol. The catalyst with optimal Cu+/Cu2+ ratio and acid-base amount showed the best catalytic performance, indicating the synergy of Cu+ and acid-base properties in the selectivity of 1,2- and 1,5-PeDs.

MOLECULAR CATALYSIS (2021)

Add to Collection

Article Chemistry, Physical

Preparation of Sulfur-Modulated Nickel/Carbon Composites from Lignosulfonate for the Electrocatalytic Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Fanhao Kong et al.

Summary: The research focused on a flowerlike hybrid composed of sulfur-modulated metallic nickel nanoparticles coupled with carbon frameworks for the electrochemical oxidation of biomass-derived 5-hydroxymethylfurfural. The optimized electrode showed high selectivity and efficiency, achieving a high yield of 2,5-furandicarboxylic acid.

ACS APPLIED ENERGY MATERIALS (2021)

Add to Collection

Article Chemistry, Applied

Catalytic hydrogenation and etherification of 5-Hydroxymethylfurfural into 2-(alkoxymethyl)-5-methylfuran and 2,5-bis(alkoxymethyl)furan as potential biofuel additives

Islam Elsayed et al.

Summary: In this study, HMF was converted into biofuel additives such as AMFs and BAMFs through two-step sequential hydrogenation and etherification reactions. Zinc-iron magnetic nanocatalyst supported on activated carbon was used for the selective hydrogenation, and commercial Bronsted acid catalysts were used for the etherification. The catalyst showed good recyclability without significant loss of catalytic activity.

FUEL PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

High-Efficiency Catalytic Transfer Hydrogenation of Biomass-Based 5-Hydroxymethylfurfural to 2,5-Bis(hydroxymethyl)furan over a Zirconium-Carbon Coordination Catalyst

Aiyong He et al.

Summary: A novel zirconium-carbon coordination catalyst (Zr-HTC) was successfully synthesized, showing outstanding catalytic activity for the selective synthesis of BHMF and excellent catalytic stability. Zr-HTC could effectively convert a wide range of carbonyl compounds to the relevant products, offering a new viewpoint for developing practical zirconium-containing coordination catalysts for the selective synthesis of valuable chemicals via catalytic transfer hydrogenation.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Catalyst structure-based hydroxymethylfurfural (HMF) hydrogenation mechanisms, activity and selectivity over Ni

Brett Pomeroy et al.

Summary: The catalytic hydrodeoxygenation of hydroxymethylfurfural was studied over a range of temperatures with nickel-based carbon-supported catalysts, promoted by lanthanum and niobium. The presence of promoters significantly altered both the reaction products and rate constants, showing the importance of catalyst composition in determining reaction outcomes. Lanthanum promotion decreased hydrogenation and deoxygenation rates, while niobium incorporation led to higher deoxygenation rates and the formation of humins at lower temperatures.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Selective Hydrogenation of the Carbonyls in Furfural and 5-Hydroxymethylfurfural Catalyzed by PtNi Alloy Supported on SBA-15 in Aqueous Solution Under Mild Conditions

Ge Gao et al.

Summary: The study successfully synthesized PtNi/SBA-15 catalyst with efficient selective hydrogenation ability in water solvent, yielding 64.6% FFA with 77.0% selectivity, and 68.2% DHMF with 81.9% selectivity. PtNi/SBA-15 also exhibited good water resistance and cycling stability after at least five runs.

FRONTIERS IN CHEMISTRY (2021)

Add to Collection

Article Chemistry, Applied

Metal Catalyst and Hydrogen Gas-Free Selective Reduction of Biomass-Derived Substituted Furfuraldehyde to Alkyl Furan as a Key Biofuel Additive

Arvind Singh Chauhan et al.

Summary: A metal catalyst and hydrogen gas-free approach have been developed for selective reduction of aldehyde to alkyl group in different substituted furan compounds, leading to successful synthesis of 5-methylfurfuryl alcohol and 2-methylfuran in high yields. The protocol showed efficient scalability and easy separation of the product.

ORGANIC PROCESS RESEARCH & DEVELOPMENT (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Selective aqueous-phase hydrogenation of furfural to cyclopentanol over Ni-based catalysts prepared from Ni-MOF composite

Haihong Xia et al.

Summary: In this study, spherical NiMo bimetal catalysts were prepared using a simple wet impregnation method and studied for selective hydrogenation of furfural. The Ni/C-Mo-BTC catalyst showed the highest selectivity of CPL (up to 90%), while the optimal Ni/C-Mo0.4 catalyst could be efficiently applied in five consecutive recycling tests. Water played a key role in the formation of different desired products in the FFA hydrogenation process.

INORGANIC CHEMISTRY COMMUNICATIONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Selective aqueous-phase hydrogenation of furfural to cyclopentanol over Ni-based catalyst under mild conditions

Changzhou Chen et al.

Summary: A series of carbon nanotube-supported Ni-based catalysts were prepared through a simple impregnation method, showing smaller particle size and better dispersion compared to monometallic Ni/CNT catalyst. The synergistic effect of Ni with Mo led to high activity in hydrogenation of biomass derivatives in aqueous medium. NiMo/CNT bimetallic catalyst exhibited a promotional effect in hydrogenation of furfural to fine chemicals, with potential applications in the food and biomass refining industry.

JOURNAL OF THE CHINESE CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Catalytic lignin valorization over HSZ-supported CuNiAl-based catalysts with microwave heating

Peng Liu et al.

Summary: Microwave assisted lignin depolymerization was studied over HSZ-supported CuNiAl-based catalysts. Improvements in bio-oil properties were observed under mild conditions, and the increased acidity in the catalyst could facilitate lignin depolymerization.

NEW JOURNAL OF CHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Catalytic transfer hydrogenation of 4-O-5 models in lignin-derived compounds to cycloalkanes over Ni-based catalysts

Changzhou Chen et al.

Summary: The study demonstrates the use of nickel supported on carbon nanotubes as a catalyst for the hydrogenolysis of aryl ethers in lignin models, with isopropanol as a hydrogen donor solvent. The catalyst can be reused for multiple recycling tests and plays a critical role in the hydrogenation reactions involving phenol and benzene.

JOURNAL OF THE CHINESE CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Physical

Interfacial Structure-Determined Reaction Pathway and Selectivity for 5-(Hydroxymethyl)furfural Hydrogenation over Cu-Based Catalysts

Qian Wang et al.

ACS CATALYSIS (2020)

Add to Collection

Article Engineering, Environmental

Catalytic hydrogenolysis of hydroxymethylfurfural to highly selective 2,5-dimethylfuran over FeCoNi/h-BN catalyst

Naimeng Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Insight into the Effect of Dual Active Cu0/Cu+ Sites in a Cu/ZnO-Al2O3 Catalyst on 5-Hydroxylmethylfurfural Hydrodeoxygenation

Qian Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Catalytic Hydrotreatment of β-O-4 Ether in Lignin: Cleavage of the C-O Bond and Hydrodeoxygenation of Lignin-Derived Phenols in One Pot

Minghao Zhou et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Agricultural Engineering

Effect of copper on NiCu bimetallic catalyst supported on SBA-16 for the catalytic hydrogenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran

S. Umasankar et al.

BIOMASS & BIOENERGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Flexible NiCo-based catalyst for direct hydrodeoxygenation of guaiacol to cyclohexanol

Changzhou Chen et al.

NEW JOURNAL OF CHEMISTRY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Catalytic hydrogenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran over Ru based catalyst: Effects of process parameters on conversion and products selectivity

Li Feng et al.

RENEWABLE ENERGY (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Recent catalytic routes for the preparation and the upgrading of biomass derived furfural and 5-hydroxymethylfurfural

C. Xu et al.

CHEMICAL SOCIETY REVIEWS (2020)

Add to Collection

Review Chemistry, Multidisciplinary

When Will 5-Hydroxymethylfurfural, the Sleeping Giant of Sustainable Chemistry, Awaken?

Konstantin Galkin et al.

CHEMSUSCHEM (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Sustainable hydrothermal self-assembly of hafnium-lignosulfonate nanohybrids for highly efficient reductive upgrading of 5-hydroxymethylfurfural

Shenghui Zhou et al.

GREEN CHEMISTRY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Catalyst-free synthesis of biodiesel precursors from biomass-based furfuryl alcohols in the presence of H2O and air

Shengxiang Qin et al.

GREEN CHEMISTRY (2019)

Add to Collection

Article Engineering, Chemical

Transfer hydrogenation of furaldehydes with sodium phosphinate as a hydrogen source using Pd-supported alumina catalyst

Shun Nishimura et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2017)

Add to Collection

Article Chemistry, Physical

Chemical transformations of glucose to value added products using Cu-based catalytic systems

Alfonso Yepez et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

Add to Collection

© Peeref 2019-2024. All rights reserved.