4.7 Article

Combining USY and ZSM-23 in Pt/zeolite hydrocracking catalyst to produce diesel and lube base oil with improved cold flow properties

Journal

FUEL
Volume 344, Issue -, Pages -

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/j.fuel.2023.128085

Keywords

Hydrocracking; Ultrastable zeolite Y; ZSM-23 zeolite; Diesel; Lube base oil; Cold flow properties

Ask authors/readers for more resources

The study investigates the combined effect of three-dimensional large-pore USY zeolite and one-dimensional medium-pore ZSM-23 zeolite in enhancing the cold flow properties of hydrocracking products. By selecting the catalyst compositions based on monozeolite catalysts testing, which operate in a similar temperature range and contribute to hexadecane conversion, it is shown that the appropriate combination of USY and ZSM-23 zeolites can complement each other and improve the conversion of both n-alkanes and iso-alkanes during vacuum gas oil hydrocracking. As a result, the cold flow properties of the obtained hydrocracking products are significantly improved while maintaining the activity and selectivity for the target products. The improvement in cold flow properties is accompanied by only a slight worsening of other important product characteristics.
The effect of the combined use of three-dimensional large-pore USY zeolite and one-dimensional medium-pore ZSM-23 zeolite to enhance the cold flow properties of hydrocracking products was studied. Based on the results of monozeolite catalysts testing in hexadecane hydroconversion, the compositions of bizeolite catalysts for vacuum gas oil hydrocracking were selected. The catalyst compositions were selected, considering that both zeolite components operate in a similar temperature range and contribute to hexadecane conversion. It has been shown that due to an appropriately selected combination of USY and ZSM-23 zeolites in the catalyst, both ze-olites perform together, complementing each other, which ensures good conversion of both n-alkanes and iso-alkanes during vacuum gas oil hydrocracking. As a result, it is possible to significantly improve the cold flow properties of the obtained hydrocracking products while maintaining the activity and selectivity for the target products of Pt/USY-ZSM-23 catalyst at the level of conventional Pt/USY catalyst. The cold filter plugging point of the diesel fraction decreases from-10 to less than-44 degrees C and the pour point from-17 to less than-50 degrees C. The pour point of lube base oil decreases from 23 to less than-27 degrees C. The improvement of the cold flow properties is accompanied by only a slight worsening of the other important product characteristics, such as diesel fraction cetane index and lube base oil viscosity index.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available