4.7 Article

Unveiling the CeO2 morphology effect in Pd-CeO2/C heterostructures catalysts for formic acid dehydrogenation

Related references

Note: Only part of the references are listed.
Article Chemistry, Multidisciplinary

Distinct Crystal-Facet-Dependent Behaviors for Single-Atom Palladium-On-Ceria Catalysts: Enhanced Stabilization and Catalytic Properties

Botao Hu et al.

Summary: This study investigates the evolution of Pd species on different crystal facets of CeO2 and discovers vastly different behaviors on the single-atomic dispersion of surface Pd atoms. The findings demonstrate the crucial role of crystal-facet effects in the preparation of metal-atom-on-metal-oxide SACs, and provide insights for the rational design and targeted synthesis of ultrastable and sinter-resistant SACs.

ADVANCED MATERIALS (2022)

Article Engineering, Environmental

Defect engineered mesoporous graphitic carbon nitride modified with AgPd nanoparticles for enhanced photocatalytic hydrogen evolution from formic acid

Chao Wan et al.

Summary: The study presents a novel defect engineering strategy to construct an AgPd nanoparticle-coupled N-deficient ordered mesoporous graphitic carbon nitride catalyst, which exhibits remarkable activity and stability for hydrogen evolution from Formic acid. The enhanced catalytic performance is mainly attributed to the unique structure of the catalyst, the strong metal-support interaction, and charge transfer mechanisms. This provides a new and efficient strategy for designing catalysts for renewable hydrogen energy production.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Engineering, Environmental

Superior photodegradation of organic compounds and H2O2 production over tungsten oxide/carbon nitride heterojunction with sizable heptazine units: Dual polycondensation and interface engineering

Milad Jourshabani et al.

Summary: The novel ultrathin tungsten oxide/carbon nitride heterojunction photocatalyst exhibits exceptional optical and photocatalytic properties, efficiently degrading dyes and antibiotics in a short period of time with superior catalytic activity.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Nitrogen-phosphorus co-functionalized reduced graphene oxide supported NiCoPd-CeOx nanoparticles as a highly efficient and stable catalyst for formic acid dehydrogenation

Jia-Yun Wang et al.

Summary: The paper investigates an efficient, low-cost, and high-stable heterogeneous catalyst for the dehydrogenation of formic acid. Through a co-reduction method, ultrafine nanoparticles of NiCoPd-CeOx supported on nitrogen phosphorus co-functionalized reduced graphene oxide (NPG) were synthesized and exhibited outstanding catalytic activity and stability. This catalyst shows potential for the practical application of formic acid in fuel cells.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Nanoscience & Nanotechnology

Enhanced Catalytic Performance of N-Doped Carbon Sphere-Supported Pd Nanoparticles by Secondary Nitrogen Source Regulation for Formic Acid Dehydrogenation

Min Deng et al.

Summary: This study investigates the catalytic performance of Pd on a series of N-doped carbon materials. The results demonstrate that the catalytic performance of Pd can be further improved by adjusting the source and content of nitrogen. Theoretical calculations reveal the favorable reaction pathways of formic acid dehydrogenation facilitated by nitrogen atoms.

ACS APPLIED MATERIALS & INTERFACES (2022)

Article Engineering, Environmental

Building P-doped MoS2/g-C3N4 layered heterojunction with a dual-internal electric field for efficient photocatalytic sterilization

Xin Zhang et al.

Summary: The research presents a novel method of synthesizing phosphorus-doped MoS2/g-C3N4 layered composite for enhanced photocatalytic efficiency. The composite shows high photocatalytic sterilization efficiency and offers a promising material for effective photocatalytic sterilization.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Multidisciplinary

Robust hydrogen production from HCOOH over amino-modified KIT-6-confined PdIr alloy nanoparticles

Wenfang Peng et al.

Summary: This study confined well-dispersed and electron-rich PdIr alloy nanoparticles in amino-modified 3D mesoporous silica KIT-6 to serve as a highly efficient catalyst for hydrogen production from formic acid at ambient temperature. The obtained PdIr/KIT-6-NH2 catalyst exhibited high catalytic activity, attributed to the synergistic effect between Pd and Ir and the role of amino groups in KIT-6-NH2 in promoting formic acid decomposition.

CHINESE CHEMICAL LETTERS (2022)

Article Chemistry, Multidisciplinary

NiCu Anchored on a Specific TiO2 Face Tunes Electron Density for Selective Hydrogenation of Fatty Acids into Alkanes or Alcohols

Feng Long et al.

Summary: Catalyst design is critical for selective hydrogenation reactions. In this study, NiCu clusters anchored on oxygen-deficient rutile were found to be highly effective for the conversion of fatty acids into alkanes or alcohols. The anchoring of NiCu clusters on oxygen defects promoted alcohol production, while other active NiCu clusters favored alkane production.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

Article Chemistry, Multidisciplinary

Asymmetric Coordination of Single-Atom Co Sites Achieves Efficient Dehydrogenation Catalysis

Hu Liu et al.

Summary: This study presents an asymmetrically coordinated metal single-atom catalyst for efficient dehydrogenation of formic acid. The catalyst exhibits impressive activity and stability, outperforming symmetrically coordinated catalysts and commercial catalysts.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Physical

Pd-WOx heterostructures immobilized by MOFs-derived carbon cage for formic acid dehydrogenation

Anqi Zhang et al.

Summary: In this study, Pd-WOx nano-heterostructures anchored on ZIF-8@ZIF-67 derived nitrogen-doped porous carbon cage were synthesized through a phosphate mediation approach. The obtained catalyst showed extraordinary catalytic performance in formic acid dehydrogenation with high selectivity and conversion.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Review Materials Science, Multidisciplinary

2022 roadmap on hydrogen energy from production to utilizations

Zheng-Xuan Yang et al.

Summary: This article discusses some important issues in hydrogen production and utilization, including methods for hydrogen production and storage, as well as the application of hydrogen fuel cells. By inviting excellent research groups to share their research progress and experiences, it aims to provide guidance for future research.

RARE METALS (2022)

Article Chemistry, Physical

Desulfurization reactions of methanethiol on defect CeO2 surfaces

Toyin Shittu et al.

Summary: This study investigates the mechanism and pathways of methanethiol decomposition on a defect CeO2 surface using density functional theory calculations. The results provide a detailed atomistic understanding of the desulfurization capacity of ceria surfaces.

APPLIED SURFACE SCIENCE (2022)

Article Nanoscience & Nanotechnology

Interfacing with Fe-N-C Sites Boosts the Formic Acid Dehydrogenation of Palladium Nanoparticles

Shan Zhong et al.

Summary: Hierarchical micro-/mesoporous carbons with abundant Fe-N-C sites were prepared through one-step carbonization of a metal-organic framework (MOF), and interfacing Pd NPs with Fe-N-C sites showed enhanced catalytic activity in hydrogen production from formic acid for the first time. The synergistic interactions between Pd NPs and Fe-N-C sites, along with the small size effects of Pd NPs, contributed to the improved catalytic activity.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Transition metal single atom anchored C3N for highly efficient formic acid dehydrogenation: A DFT study

Qiming Bing et al.

Summary: This study developed a series of single-atom catalysts supported on a novel carbon-nitrogen material and evaluated their catalytic performance for formic acid dehydrogenation using density functional theory. Ni@C3N, Pd@C3N, and Pt@C3N were identified as candidates, with Pd@C3N exhibiting the best catalytic activity. Factors influencing reaction activity were revealed through analysis of catalytic mechanism and electronic structure.

APPLIED SURFACE SCIENCE (2021)

Article Engineering, Environmental

CO2 hydrogenation to lower olefins over Mn2O3-ZnO/SAPO-34 tandem catalysts

Jun Mou et al.

Summary: In this study, a binary Mn2O3-ZnO oxide combined with SAPO-34 molecular sieve was used for the tandem hydrogenation of CO2 to methanol. By adjusting the proximity between the oxide and the sieve, the formation of methanol intermediate was enhanced, leading to improved reaction efficiency.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Energy & Fuels

Pd nanoparticles supported on CeO2 nanospheres as efficient catalysts for dehydrogenation from additive-free formic acid at low temperature

Yibo Gao et al.

Summary: Pd nanoparticles (NPs)-CeO2 based catalysts were successfully synthesized, with Pd NPs uniformly dispersed on CeO2 nanospheres showing excellent catalytic performance. Increasing Pd loading amount led to improved catalytic efficiency, with the 10 wt% Pd*CeO2 catalyst exhibiting the highest activity for dehydrogenation of formic acid. The superior performance of 10 wt% Pd*CeO2 can be attributed to the high dispersion of Pd NPs, more electron-rich Pd active sites, and the Strong Metal-Support Interactions (SMSI) between Pd and CeO2.
Article Chemistry, Applied

Synthesis of palladium-rhodium bimetallic nanoparticles for formic acid dehydrogenation

Ilaria Barlocco et al.

Summary: This study reports the synthesis of preformed bimetallic Pd-Rh nanoparticles with different ratios, showing that the Pd-Rh molar ratio significantly influences the catalytic performance, with Pd-rich catalysts exhibiting higher activity and Pd-69:Rh-31 showing the most stability during recycling tests.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Physical

In-situ construction of lattice-matching NiP2/NiSe2 heterointerfaces with electron redistribution for boosting overall water splitting

Lei Yang et al.

Summary: Constructing heterostructure of NiP2/NiSe2 electrocatalysts with optimized interface and electron redistribution can significantly enhance catalytic performance towards water splitting, showing promising potential for future development of efficient and durable catalysts.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Chemistry, Physical

Theoretical insight into the role of nitrogen in the formic acid decomposition over Pt13/N-GNS

Jian-Rui Feng et al.

Summary: This study investigated the ligand effect and catalytic effect of nitrogen dopant in carbon support using density functional theory calculations. The results showed that nitrogen site can efficiently cleave the O-H bond, enhancing the performance of formic acid hydrogenation. Microkinetic simulations further determined the optimal nitrogen doping concentration as a function of temperature.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Multidisciplinary

Facile Synthesis of Microporous Carbons from Biomass Waste as High Performance Supports for Dehydrogenation of Formic Acid

Tingting Cao et al.

Summary: The study shows that ZnCl2-activated carbon materials can serve as catalyst supports, helping to improve the storage and conversion efficiency of hydrogen gas.

NANOMATERIALS (2021)

Review Acoustics

A review on recent advances in hydrogen energy, fuel cell, biofuel and fuel refining via ultrasound process intensification

Ujwal Kishor Zore et al.

Summary: This review highlights the importance of hydrogen energy as a green substitute for harmful fossil fuels, focusing on the applications of sonochemistry in the production, storage, and usage of hydrogen. It emphasizes the significance of sonochemical methods in addressing the technical challenges involved in hydrogen energy utilization.

ULTRASONICS SONOCHEMISTRY (2021)

Article Chemistry, Physical

Robust Hydrogen Production from Additive-Free Formic Acid via Mesoporous Silica-Confined Pd-ZrO2 Nanoparticles at Room Temperature

Yi-Xing Luo et al.

Summary: Hydrogen is promising for future sustainable energy systems due to its cleanliness and renewability, while formic acid is considered an efficient hydrogen supplier because of its high hydrogen content and ease of storage and transport. Researchers have successfully developed Pd-ZrO2/SBA-15-NH2 catalyst for the dehydrogenation of formic acid, achieving 100% hydrogen selectivity at ambient conditions.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

The Synergistic Effect of Oxygen Vacancy and Carbon Interface Engineering in Hollow Cerium Oxide to Achieve Enhanced Oxygen Reduction Performance

Liang Lv et al.

Summary: The study introduces the development of a N-doped carbon-coated CeO2 hollow structure with massive oxygen vacancy (Vo-CeO2-NC) catalyst, which exhibits high oxygen reduction reaction performance. The synergistic effect of oxygen vacancies and the N-doped carbon interface layer can promote the conductivity of CeO2 and significantly improve the catalyst's oxygen reduction reaction performance, as indicated by catalytic results and density functional theory calculations.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Strong Metal-Support Interaction for 2D Materials: Application in Noble Metal/TiB2 Heterointerfaces and their Enhanced Catalytic Performance for Formic Acid Dehydrogenation

Renhong Li et al.

Summary: In the study of strong metal-support interaction (SMSI) between noble metal and 2D TiB2 supports, direct evidence of encapsulating metal nanoparticles with TiB2 overlayers to form sintering-resistant core-shell structures is reported. This newly created TiB2-based SMSI promotes catalytic activity and stability simultaneously, optimizing hydrogen production and selectivity. The theoretical and experimental results suggest that the interaction between transition metals and TiB2 overlayers plays a crucial role in creating thermally stable and catalytically active metal/support interfaces for scalable chemical and energy applications.

ADVANCED MATERIALS (2021)

Article Chemistry, Applied

Ultrafine PdAg alloy nanoparticles anchored on NH2-functionalized 2D/2D TiO2 nanosheet/rGO composite as efficient and reusable catalyst for hydrogen release from additive-free formic acid at room temperature

Xi Zhao et al.

Summary: A high-performance Pd8Ag1/NH2-TNS-rGO catalyst was prepared for dehydrogenation of formic acid, showing a high turnover frequency and excellent activity without the need for additives.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Nanoscience & Nanotechnology

Anchoring IrPdAu Nanoparticles on NH2-SBA-15 for Fast Hydrogen Production from Formic Acid at Room Temperature

Yixing Luo et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Multidisciplinary

CO catalytic oxidation over Pd/CeO2with different chemical states of Pd

Guo-Feng Zhou et al.

RARE METALS (2020)

Article Chemistry, Physical

Activating the Pd-Based catalysts via tailoring reaction interface towards formic acid dehydrogenation

Nanxing Gao et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Article Chemistry, Multidisciplinary

Zeolite-Encaged Pd-Mn Nanocatalysts for CO2Hydrogenation and Formic Acid Dehydrogenation

Qiming Sun et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Review Chemistry, Multidisciplinary

A review of defect structure and chemistry in ceria and its solid solutions

Rafael Schmitt et al.

CHEMICAL SOCIETY REVIEWS (2020)

Review Materials Science, Multidisciplinary

Size-controllable synthesis and high-performance formic acid oxidation of polycrystalline Pd nanoparticles

Hui-Hui Wang et al.

RARE METALS (2019)

Article Materials Science, Multidisciplinary

Synthesis Pd/biomass-based carbon microsheet composite for efficient dehydrogenation from formic acid

Ying Shi et al.

MATERIALS LETTERS (2019)

Article Engineering, Environmental

Ru/CeO2 Catalyst with Optimized CeO2 Support Morphology and Surface Facets for Propane Combustion

Zheng Wang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Chemistry, Physical

Theoretical insights into the hydrophobicity of low index CeO2 surfaces

Marco Fronzi et al.

APPLIED SURFACE SCIENCE (2019)

Article Materials Science, Coatings & Films

Structure and properties of hydrophobic CeO2-x coatings synthesized by reactive magnetron sputtering for biomedical applications

Mohammad Sharear Kabir et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Article Chemistry, Physical

An effective low Pd-loading catalyst for hydrogen generation from formic acid

Yunjie Huang et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Physical

Photo-induced re-modulation of Pt particles loaded on V-TiO2 for enhanced CO photocatalytic oxidation

Liming Xu et al.

CATALYSIS SCIENCE & TECHNOLOGY (2017)

Review Chemistry, Multidisciplinary

Size- and shape-dependent catalytic performances of oxidation and reduction reactions on nanocatalysts

Shaowen Cao et al.

CHEMICAL SOCIETY REVIEWS (2016)

Article Chemistry, Physical

Nanostructured manganese doped ceria solid solutions for CO oxidation at lower temperatures

Perala Venkataswamy et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2015)

Article Chemistry, Multidisciplinary

Surfactant-Directed Synthesis of Mesoporous Pd Films with Perpendicular Mesochannels as Efficient Electrocatalysts

Cuiling Li et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Chemistry, Physical

Morphology effect of Ru/CeO2 catalysts for the catalytic combustion of chlorobenzene

Hao Huang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2014)