4.7 Article

Thermogels based on biocompatible OEGMA-MEGMA diblock copolymers

Related references

Note: Only part of the references are listed.
Review Polymer Science

Thermoresponsive block copolymers of increasing architecture complexity: a review on structure-property relationships

Anna P. Constantinou et al.

Summary: This article discusses the structure-property relationship of thermoresponsive block copolymers, with a focus on the effect of architecture to control thermoresponsive properties.

POLYMER CHEMISTRY (2023)

Article Engineering, Multidisciplinary

Thermo-responsive hydrogel-supported antibacterial material with persistent photocatalytic activity for continuous sterilization and wound healing

Lin Liu et al.

Summary: The new antibacterial photocatalyst LGG/T successfully addresses the main challenges of APCT, with persistent antibacterial activity promoting wound healing effectively.

COMPOSITES PART B-ENGINEERING (2022)

Article Chemistry, Physical

Thermoresponsive poly(di(ethylene glycol) methyl ether methacrylate)-ran-(polyethylene glycol methacrylate) graft copolymers exhibiting temperature-dependent rheology and self-assembly

Jessica Bassi da Silva et al.

Summary: This article investigates graft copolymers with brush-like architectures containing thermoresponsive monomers. The study explores the chemical structure of the thermoresponsive polymer and its impact on phase behavior and rheological properties. The materials show potential for temperature-responsive applications in the field of medical materials.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Article Polymer Science

Investigation of the Thermogelation of a Promising Biocompatible ABC Triblock Terpolymer and Its Comparison with Pluronic F127

Anna P. Constantinou et al.

Summary: In this study, thermoresponsive polymers and their gelling behavior are investigated. A cost-effective biocompatible alternative to commercially available polymers is reported, which forms gels at low concentrations. The differences in gelling mechanisms between the investigated polymer and Poloxamer P407 (Pluronic F127) are elucidated through nanoscale self-assembly and rheological analysis.

MACROMOLECULES (2022)

Article Chemistry, Physical

Impact of small molecule and reverse poloxamer addition on the micellization and gelation mechanisms of poloxamer hydrogels

Joanna M. White et al.

Summary: Poloxamer 407 (P407) is a widely used material for targeted drug-delivery due to its thermoresponsive gelation behavior. Adding reverse poloxamers (RPs) impacts the thermal transitions, rheological properties, and assembled structures of P407, offering new strategies for tuning the mechanical and structural properties of hydrogels and enabling the design of drug-loaded formulations with ideal thermal transitions.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2022)

Article Chemistry, Multidisciplinary

Aldehyde-functional thermoresponsive diblock copolymer worm gels exhibit strong mucoadhesion

Emma E. Brotherton et al.

Summary: A series of thermoresponsive diblock copolymer worm gels with adjustable aldehyde content were prepared using RAFT aqueous dispersion polymerization. The aldehyde-functional worm gels showed comparable mucoadhesion performance to chitosan, a widely regarded positive control. The optimum degree of aldehyde functionality was found to be around 30%.

CHEMICAL SCIENCE (2022)

Article Polymer Science

Thermoresponsive oligo(ethylene glycol) methyl ether methacrylate based copolymers: composition and comonomer effect

Qian Li et al.

Summary: Thermoresponsive polymers based on oligo(ethylene glycol) methyl ether methacrylate monomers were synthesized and their thermoresponsive properties were investigated. The copolymers not only lowered the critical gelation concentration of Pluronic (R) F127, but also increased the gelation temperature.

POLYMER CHEMISTRY (2022)

Review Chemistry, Multidisciplinary

Polymers Exhibiting Lower Critical Solution Temperatures as a Route to Thermoreversible Gelators for Healthcare

Michael T. Cook et al.

Summary: Materials with smart behavior that can change their properties in response to external stimuli have enabled innovative technologies for healthcare applications. Thermoreversible gelators, which undergo reversible phase changes triggered by temperature, are being used for drug delivery, tissue engineering, and 3D printing. Challenges in translating these technologies include the lack of rigorous toxicological evaluation.

ADVANCED FUNCTIONAL MATERIALS (2021)

Review Chemistry, Multidisciplinary

Injectable thermoresponsive hydrogels as drug delivery system for the treatment of central nervous system disorders: A review

Elena Bellotti et al.

Summary: The central nervous system (CNS) plays a crucial role in coordinating the activities of the whole body, and the societal and economic burden associated with CNS disorders continues to grow. The challenges in treating CNS disorders lie in the complexity of the disease mechanisms and unique biological microenvironment.

JOURNAL OF CONTROLLED RELEASE (2021)

Article Polymer Science

PhotoATRP-Induced Self-Assembly (PhotoATR-PISA) Enables Simplified Synthesis of Responsive Polymer Nanoparticles in One-Pot

Ali Shahrokhinia et al.

Summary: Photo-controlled atom transfer radical polymerization (PhotoATRP) was used to achieve polymerization-induced self-assembly (PISA) mediated by UV light for the first time, resulting in core-cross-linked nanoparticles (NPs). By sequentially extending PGMA chains and incorporating CBMA for core cross-linking, multifunctional copolymer NPs were obtained with temporal control through UV light switching. Additionally, the core cross-linking with disulfide bonds in CBMA allowed for stimulus-triggered dissociation of nanoparticles at acidic pH.

MACROMOLECULES (2021)

Article Polymer Science

Self-Assembled Micelles from Thermoresponsive Poly(methyl methacrylate)-b-poly(N-isopropylacrylamide) Diblock Copolymers in Aqueous Solution

Chia-Hsin Ko et al.

Summary: The temperature-dependent phase behavior and self-assembly behavior of a thermoresponsive amphiphilic diblock copolymer in aqueous solution were studied, revealing a lower critical solution temperature (LCST) behavior at 31.1 degrees Celsius and the formation of different structures of micelles.

MACROMOLECULES (2021)

Article Chemistry, Multidisciplinary

Pickering Emulsions Stabilized by Diblock Copolymer Worms Prepared via Reversible Addition-Fragmentation Chain Transfer Aqueous Dispersion Polymerization: How Does the Stimulus Sensitivity Affect the Rate of Demulsification?

Yong Gao et al.

Summary: Stimuli-responsive Pickering emulsions stabilized by E15D120 worms demonstrated excellent emulsifying performances and different demulsification rates under various external stimuli. Through rational synthesis, a series of different morphological polymer nanoparticles could be produced.

LANGMUIR (2021)

Article Polymer Science

Tuning the Gelation of Thermoresponsive Gels Based on Triblock Terpolymers

Anna P. Constantinou et al.

Summary: This study introduces a novel thermoresponsive gel material composed of ABC triblock terpolymers, with the best-performing polymer gelling at low concentrations at body temperature. Fifteen different terpolymers were synthesized via group transfer polymerization, with a focus on characterizing their gelation properties through visual tests and rheological measurements. The critical importance of achieving the optimal hydrophilicity/hydrophobicity ratio for a clear solution to gel transition and wide gelation area including body temperature was highlighted.

MACROMOLECULES (2021)

Article Chemistry, Physical

Molecular understanding of the LCST phase behaviour of P(MEO2MA-b-OEGMA) block copolymers

Zhicheng Ye et al.

Summary: The LCST behavior of block copolymer P(MEO(2)MA-b-OEGMA) is linearly related to its OEGMA block ratio, which is influenced by the hydrophilic effect and entropy effect of water. The dominant hydrophilic effect leads to a coil state at lower temperatures, while the prevailing entropy effect causes a globule state at higher temperatures, resulting in a coil-to-globule transition at the LCST where the competition between the two effects reaches a balance.

MOLECULAR SIMULATION (2021)

Article Polymer Science

Synthesis, self-assembly and thermoresponsive behavior of Poly (lactide-co-glycolide)-b-Poly(ethylene glycol)-b-Poly(lactide-co-glycolide) copolymer in aqueous solution

Xiaohua Chang et al.

Summary: Thermoresponsive block copolymer micelles have potential in biological applications, with studies showing that changes in hydrophobic/hydrophilic block ratio, micelle concentration and addition of salt can alter the cloud point. Increasing the amount of PLGA hydrophobic block significantly decreases the cloud point, while higher micelle concentration and salt addition also lower the cloud point.

POLYMER (2021)

Article Biochemistry & Molecular Biology

Polymers for Biomedical Applications: The Importance of Hydrophobicity in Directing Biological Interactions and Application Efficacy

Amanda K. Pearce et al.

Summary: Significant research efforts have been dedicated to exploring the potential of polymers for biomedical applications in recent decades. The properties of polymers, including chemistry, charge, and self-assembly characteristics, play a crucial role in their interactions with cells and biological membranes. Specifically, the hydrophobicity of polymers has been identified as a key property influencing their efficacy in biomedicine applications.

BIOMACROMOLECULES (2021)

Article Polymer Science

Phase diagrams of temperature-responsive copolymers p (MEO2MA-co-OEGMA) in water

Ana C. Santos et al.

Summary: The random copolymers of MEO2MA and OEGMA exhibit a temperature-induced phase transition in aqueous solutions, with the transition temperature tunable by changing the monomer ratio. By combining UV-Vis measurements and differential scanning calorimetry, phase diagrams of copolymers with different compositions were obtained, showing significant influence of concentration on temperature response.

POLYMER (2021)

Article Chemistry, Multidisciplinary

Tuning the properties of hydrogen-bonded block copolymer worm gels prepared via polymerization-induced self-assembly

Eleanor Raphael et al.

Summary: Polymerization-induced self-assembly (PISA) is used to design hydrogen-bonded poly(stearyl methacrylate)-poly(benzyl methacrylate) [PSMA-PBzMA] worm gels, with the ability to tune the storage modulus (G') by adjusting the proportion of end-groups on the PSMA chains. Two complementary routes are employed for achieving this tunability. SAXS and rheology studies offer detailed insights into the inter-worm interactions and physical behavior of these hydrogen-bonded worm gels.

CHEMICAL SCIENCE (2021)

Article Polymer Science

Homo- and co-polymerisation of di(propylene glycol) methyl ether methacrylate - a new monomer

Anna P. Constantinou et al.

Summary: In this study, a new methacrylate monomer di(propylene glycol) methyl ether methacrylate (diPGMA) was synthesised and homopolymerised and copolymerised for the first time via GTP. A series of ABA triblock copolymers were prepared and their self-assembly and thermoresponsive properties were investigated. The copolymers showed thermoresponse and gel formation in concentrated aqueous solutions, indicating potential applications in thermogelling materials.

POLYMER CHEMISTRY (2021)

Article Polymer Science

A library of thermoresponsive PEG-based methacrylate homopolymers: How do the molar mass and number of ethylene glycol groups affect the cloud point?

Qian Li et al.

Summary: A novel library of thermoresponsive homopolymers based on poly (ethylene glycol) was synthesized and investigated in this study. The research focused on how parameters such as molar mass, ethylene glycol group numbers, and side group chemistry affect the thermoresponsive behavior of these polymers. The results showed that the cloud points of these homopolymers decrease as the number of EG groups decreases or the molar mass increases, while the end functional group of the side group also plays a significant role.

JOURNAL OF POLYMER SCIENCE (2021)

Article Engineering, Biomedical

Total Iron Measurement in Human Serum With a Novel Smartphone-Based Assay

Michael Serhan et al.

IEEE JOURNAL OF TRANSLATIONAL ENGINEERING IN HEALTH AND MEDICINE (2020)

Proceedings Paper Materials Science, Multidisciplinary

Smart materials types, properties and applications: A review

Shashi Bahl et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Review Materials Science, Biomaterials

Thermoresponsive polymers and their biomedical application in tissue engineering - a review

Falko Doberenz et al.

JOURNAL OF MATERIALS CHEMISTRY B (2020)

Review Biochemistry & Molecular Biology

Thermosensitive Hydrogels as Scaffolds for Cartilage Tissue Engineering

Yanbo Zhang et al.

BIOMACROMOLECULES (2019)

Article Polymer Science

Thermoreversible Block Copolymer Worm Gels Using Binary Mixtures of PEG Stabilizer Blocks

Nicholas J. W. Penfold et al.

MACROMOLECULES (2019)

Review Materials Science, Biomaterials

Thermo-responsive polymers: Applications of smart materials in drug delivery and tissue engineering

Mattia Sponchioni et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2019)

Article Chemistry, Multidisciplinary

A Single Thermoresponsive Diblock Copolymer Can Form Spheres, Worms or Vesicles in Aqueous Solution

Liam P. D. Ratcliffe et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Review Chemistry, Multidisciplinary

Tailoring polymer dispersity and shape of molecular weight distributions: methods and applications

Richard Whitfield et al.

CHEMICAL SCIENCE (2019)

Article Pharmacology & Pharmacy

Investigation of effectiveness of some extensively used polymers on thermoreversible properties of Pluronic® tri-block copolymers

Nilesh R. Rarokar et al.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2018)

Article Engineering, Biomedical

Thermosensitive biomimetic polyisocyanopeptide hydrogels may facilitate wound repair

Roel C. op 't Veld et al.

BIOMATERIALS (2018)

Article Chemistry, Physical

What causes the anomalous aggregation in pluronic aqueous solutions?

Kuo-Chih Shih et al.

SOFT MATTER (2018)

Article Chemistry, Multidisciplinary

Metal-Catalyzed Group-Transfer Polymerization: A Versatile Tool for Tailor-Made Functional (Co) Polymers

Friederike Adams et al.

CHEMISTRY-A EUROPEAN JOURNAL (2018)

Article Biotechnology & Applied Microbiology

Microengineered 3D Cell-Laden Thermoresponsive Hydrogels for Mimicking Cell Morphology and Orientation in Cartilage Tissue Engineering

Amir Mellati et al.

BIOTECHNOLOGY AND BIOENGINEERING (2017)

Article Engineering, Biomedical

Mechanical properties of biocompatible clay/P(MEO2MA-co-OEGMA) nanocomposite hydrogels

Hengxue Xiang et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2017)

Article Polymer Science

Stabilization of Pluronic Gels in the Presence of Different Polysaccharides

Anna-Lena Kjoniksen et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

Review Chemistry, Multidisciplinary

Hydrogels in a historical perspective: From simple networks to smart materials

Sytze J. Buwalda et al.

JOURNAL OF CONTROLLED RELEASE (2014)

Article Biochemistry & Molecular Biology

Thermosensitive Polymeric Hydrogels As Drug Delivery Systems

C. Gong et al.

CURRENT MEDICINAL CHEMISTRY (2013)

Article Polymer Science

Thermoresponsive gels based on ABA triblock copolymers: Does the asymmetry matter?

Mark A. Ward et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2013)

Article Polymer Science

A triple thermoresponsive schizophrenic diblock copolymer

Qilu Zhang et al.

POLYMER CHEMISTRY (2013)

Review Polymer Science

Recent progress in organocatalytic group transfer polymerization

Keita Fuchise et al.

POLYMER CHEMISTRY (2013)

Article Chemistry, Multidisciplinary

Sterilizable Gels from Thermoresponsive Block Copolymer Worms

Adam Blanazs et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)

Article Chemistry, Multidisciplinary

Thermo-Switchable Materials Prepared Using the OEGMA-Platform

Jean-Francois Lutz

ADVANCED MATERIALS (2011)

Article Chemistry, Physical

Viscoelastic solution of long polyoxyethylene chain phytosterol/monoglyceride/water systems

Suraj Chandra Sharma et al.

COLLOID AND POLYMER SCIENCE (2010)

Article Chemistry, Physical

Temperature sensitivity of wormlike micelles in poly(oxyethylene) surfactant solution: Importance of hydrophobic-group size

Toufiq Ahmed et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2009)

Article Chemistry, Multidisciplinary

High intensity focused ultrasound-responsive release behavior of PLA-b-PEG copolymer micelles

Hongji Zhang et al.

JOURNAL OF CONTROLLED RELEASE (2009)

Article Chemistry, Multidisciplinary

PEG-based thermogels: Applicability in physiological media

Nezha Badi et al.

JOURNAL OF CONTROLLED RELEASE (2009)

Article Polymer Science

Thermogelation of PEG-Based Macromolecules of Controlled Architecture

Nina Fechler et al.

MACROMOLECULES (2009)

Article Chemistry, Physical

On the concentration-induced growth of nonionic wormlike micelles

S. Bulut et al.

EUROPEAN PHYSICAL JOURNAL E (2008)

Article Polymer Science

Synthesis, Self-Assembly, and Thermosensitive Properties of Ethyl Cellulose-g-P(PEGMA) Amphiphilic Copolymers

Yanxiang Li et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2008)

Article Polymer Science

Libraries of Methacrylic Acid and Oligo(ethylene glycol) Methacrylate Copolymers with LCST Behavior

C. Remzi Becer et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2008)

Article Polymer Science

Stability and Utility of Pyridyl Disulfide Functionality in RAFT and Conventional Radical Polymerizations

Cyrille Boyer et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2008)

Review Polymer Science

Polymerization of oligo(ethylene glycol) (meth)acrylates: Toward new generations of smart biocompatible materials

Jean-Francois Lutz

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2008)

Review Chemistry, Multidisciplinary

Block copolymer nanostructures

Thomas Smart et al.

NANO TODAY (2008)

Review Chemistry, Physical

Strategies to improve the response rate of thermosensitive PNIPAAm hydrogels

Xian-Zheng Zhang et al.

SOFT MATTER (2008)