☆ 4.7 Article

The energy dissipation mechanism of bi-metal Kevlar\titanium fiber metal laminate under high-velocity impact

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

Experiment study of basalt fiber/steel hybrid laminates under high-velocity impact performance by projectiles

Yuezhao Pang et al.

Summary: Fibre-metal laminates have been successfully applied in modern engineering industries due to their excellent impact resistance. A ballistic impact test was conducted on a basalt fibre/steel hybrid laminate to analyze the influence of lay-up structure, fibre volume fraction, laminated surface density, and laminate impact angle on ballistic impact performance. The results showed varying ballistic limit velocity values and specific energy absorption with different lay-up structures, as well as improved energy loss with penetration angle in oblique penetration experiments.

COMPOSITE STRUCTURES (2022)

Add to Collection

Article Engineering, Multidisciplinary

Experimental and numerical evaluation of the perforation resistance of multi-layered alumina/aramid fiber ballistic shield impacted by an armor piercing projectile

Riccardo Scazzosi et al.

Summary: The Multilayered Armor System combines a ceramic front layer and a ductile backing, designed using numerical models to reduce the workload of experimental testing, but requires expertise. The Finite Element method cannot accurately simulate ceramic fragmentation, leading to the development of a new model in this study that showed good results when validated against experimental data.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Comparing pyrometry and thermography in ballistic impact experiments

Connor Woodruff et al.

Summary: Thermal analyses were conducted on aluminum projectiles to investigate projectile impact and subsequent combustion using a high-velocity impact ignition system. Temperature measurements were compared using pyrometry and thermography, showing pyrometry is best for immediate temperature measurement while thermography quantifies temperature dissipation downstream. Three combustion stages were identified in the thermography data.

MEASUREMENT (2022)

Add to Collection

Article Engineering, Multidisciplinary

Impact damage modeling in woven composites with two-level Parametrically-Upscaled Continuum Damage Mechanics Models (PUCDM)

Xiaofan Zhang et al.

Summary: This paper develops two-level parametrically-upscaled continuum damage mechanics models for woven composites. The models are thermodynamically consistent and integrate micro-/mesostructure to bridge length scales. The coefficients are determined using machine learning algorithms operating on a response database. The models are validated using ballistic impact experiments with good agreement.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

A modified model to predict the ballistic limit of a cubic fragment penetrating Kevlar / titanium fiber metal laminate

Zhiyuan Zhu et al.

Summary: Fiber-Metal laminate (FML) is widely used in marine, military, and aerospace fields for structural protection due to its lightweight and high strength. This study investigates the ballistic resistance of a bi-metal 2/1 FML and proposes a modified theoretical model based on energy dissipation to predict the ballistic limit and analyze energy absorption. The experimental data validates the effectiveness of the modified model.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2022)

Add to Collection

Article Materials Science, Textiles

Study on high velocity impact response of aramid fibers-epoxy/aluminum laminate composites toughened by ZrO2 and SiO2 nanoparticles

Mohammad Hossein Abedi et al.

Summary: This study investigates the improvement in high-velocity impact response of fiber metal laminates through modification of epoxy using SiO2 and ZrO2 nanoparticles. The modification of epoxy increased the specific energy absorption and changed the failure mechanism. Finite element simulation results agree well with experimental data.

JOURNAL OF INDUSTRIAL TEXTILES (2022)

Add to Collection

Article Mechanics

Low-velocity impact on square sandwich plates with fibre-metal laminate face-sheets: Analytical and numerical research

Jianxun Zhang et al.

Summary: This study investigates the low-velocity impact on clamped square sandwich plates composed of a metal foam core and fibre-metal laminate face-sheets using analytical and numerical methods. The impact behavior is formulated based on a modified rigid-plastic material approximation, with numerical simulations conducted and compared with analytical results. The influences of material parameters and impact location on dynamic behaviors are discussed in detail, providing an efficient and simple analytical method for predicting low-velocity impact on square FML sandwich plates.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mechanics

Delamination in GLARE laminates under low velocity impact

Sasanka Kakati et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Engineering, Multidisciplinary

On the impact failure behavior of triaxially braided composites subjected to metallic plate projectile

Zhenqiang Zhao et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Engineering, Mechanical

The effect of stacking sequence of basalt and Kevlar fibers on the Charpy impact behavior of hybrid composites and fiber metal laminates

Fardin Asghari Arpatappeh et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2020)

Add to Collection

Article Engineering, Civil

Experimental and numerical studies on the ballistic impact response of titanium sandwich panels with different facesheets thickness ratios

Amirmasoud Rahimijonoush et al.

THIN-WALLED STRUCTURES (2020)

Add to Collection

Article Engineering, Mechanical

Failure modes in a carbon/titanium fibre metal laminate under hypervelocity impact

G. Corderley et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

Add to Collection

Article Engineering, Multidisciplinary

Damage and failure mechanism of thin composite laminates under low-velocity impact and compression-after-impact loading conditions

Hongliang Tuo et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Modification of Ti-6Al-4V plates with Schiff base complex and adhesive performance of Ti-6Al-4V/PEEK

Lei Pan et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Mechanics

Mechanical behaviors of Ti/CFRP/Ti laminates with different surface treatments of titanium sheets

Xin Li et al.

COMPOSITE STRUCTURES (2017)

Add to Collection

Article Mechanics

Low-velocity impact response of fiberglass/magnesium FMLs with a new 3D fiberglass fabric

Zohreh Asaee et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Materials Science, Composites

Influences of thickness and stacking sequence on ballistic impact behaviors of GLARE 5 FML plates: Part I-experimental studies

A. Seyed Yaghoubi et al.

JOURNAL OF COMPOSITE MATERIALS (2014)

Add to Collection

Article Materials Science, Composites

Influences of thickness and stacking sequence on ballistic impact behaviors of GLARE 5 FML plates: Part II - Numerical studies

A. Seyed Yaghoubi et al.

JOURNAL OF COMPOSITE MATERIALS (2014)

Add to Collection

Article Engineering, Aerospace

Analytical modeling to predict the low velocity impact response of circular GLARE fiber-metal laminates

George J. Tsamasphyros et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Mechanics

An integrated study on the low-velocity impact response of the GLARE fibre-metal laminate

F. D. Moriniere et al.

COMPOSITE STRUCTURES (2013)

Add to Collection

Article Engineering, Mechanical

A model for ballistic impact on multi-layer fabric targets

M. Mamivand et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2010)

Add to Collection

Article Engineering, Civil

Dynamic response of fiber-metal laminates (FMLs) subjected to low-velocity impact

G. H. Payeganeh et al.

THIN-WALLED STRUCTURES (2010)

Add to Collection

Article Mechanics

Penetration and perforation of FRP laminates struck transversely by conical-nosed projectiles

T. He et al.

COMPOSITE STRUCTURES (2007)

Add to Collection

Article Materials Science, Composites

The impact resistance of polypropylene-based fibre-metal laminates

M. R. Abdullah et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2006)

Add to Collection

Article Mechanics

Ballistic impact of GLARE™ fiber-metal laminates

MSH Fatt et al.

COMPOSITE STRUCTURES (2003)

Add to Collection

Article Mechanics

Predicting the penetration and perforation of FRP laminates struck normally by projectiles with different nose shapes

HM Wen

COMPOSITE STRUCTURES (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.