Related references
Note: Only part of the references are listed.
Article
Engineering, Environmental
Youngkun Chung et al.
Summary: This study demonstrates a novel method to prepare ceramic nanofiltration membranes with tunable molecular weight cut-off by packing nanoparticles into existing membrane pores. The results show a high accuracy in predicting MWCO using curve fitting model with variously sized nanoparticles.
Article
Engineering, Environmental
Shengli Wang et al.
Summary: This study reports efficient electrochemical removal of benzotriazole (BTA) using a titanium oxide (TiSO) electroactive ceramic membrane (ECM). The formation of an anti-corrosive BTA film on the TiSO anode was found to enhance the BTA removal. The results of experimental analysis and theoretical calculations identified the degradation pathways and showed a remarkable decrease in toxicity and bioaccumulation factor.
Article
Engineering, Environmental
Namhyeok Kim et al.
Summary: The study found that by using a Na super ionic conductor (NASICON) in electrodialysis (ED), the productivity of seawater desalination can be enhanced, energy consumption reduced, and energy storage combined, leading to energy-efficient seawater utilization.
Article
Engineering, Environmental
Mingliang Chen et al.
Summary: This study compared the fouling of alumina and silicon carbide (SiC) ceramic membranes in oil-in-water (O/W) emulsion treatment. The results showed that alumina membranes had higher fouling tendencies at low permeate flux, while SiC-deposited membranes exhibited lower fouling tendencies and higher cleaning efficiencies. The emulsion chemistry, including surfactant concentration, pH, salinity, and Ca2+ concentration, had an impact on membrane fouling. The presence of Ca2+ led to significant irreversible fouling of both membranes.
Article
Engineering, Environmental
Qian Jiang et al.
Summary: The pore structure of SiC membranes has a significant impact on their performance in oily water treatment. Increasing the open porosity and pore size can improve the wetting properties, resulting in enhanced oil-water separation efficiency.
Article
Engineering, Environmental
Priyanka Kumari et al.
Summary: The remediation of persistent organic pollutants in surface and ground water is a global environmental challenge. Conventional physico-chemical techniques are not efficient in removing such pollutants, thus requiring new remediation techniques. This study developed photo-electro catalytic membranes that combine photocatalytic and electrocatalytic degradation of contaminants with molecular sieving. The membranes exhibited enhanced hydrophilicity and electro-chemical properties, resulting in increased photocurrent efficiency and degradation kinetic factors compared to photocatalysis and electrocatalysis. The strategy of using these membranes offers great potential in designing stimuli-responsive materials for simultaneous sieving and degradation of toxic contaminants.
Article
Engineering, Environmental
Hui Wu et al.
Summary: This study presents a new strategy for highly efficient treatment of both synthetic and real oily emulsions using inexpensive whisker-constructed ceramic membranes. These membranes show exceptional permeance, low energy input, and better oleophobicity in water. The study explores different operating parameters and uses classical Hermia models to understand the fouling mechanism between emulsion droplets and the membrane interface. The membranes also perform well in treating real acidic oily wastewater, outperforming most state-of-the-art ceramic membranes. This work introduces a new structure concept for highly permeable whisker-constructed porous ceramic membranes that can enable more efficient water separation applications.
Article
Engineering, Environmental
Yingchao Dong et al.
Summary: More robust and efficient ceramic membranes are being increasingly used for water treatment due to their long service lifespan, stability, and anti-fouling properties. However, reducing cost and enhancing efficiency remain challenging issues. This review critically discusses strategies for decreasing membrane cost and improving treatment efficiency, as well as recent advances in membrane development and application in harsh environments. The paper provides valuable insights for the future development and application of ceramic membranes.
Article
Engineering, Environmental
Zhouyan Li et al.
Summary: Electrochemical membrane filtration (EMF) technology, using a Janus Fe-Pt electrochemical ceramic membrane (ECM), has been developed for the efficient removal of micropollutants from low-conductivity surface water. The Janus ECM, with thin Fe and Pt layers deposited on each side, ensures decent conductance and maintains removal efficiency. Hydroxyl radicals generated on both sides of ECM are found to be the dominant reactive oxygen species. The system achieves high removal efficiency of atrazine with low energy consumption and stable performance in continuous filtration experiments. The study highlights the potential of Janus ECM in removing micropollutants from low-conductivity surface water and wastewater.
Article
Reza Khalili et al.
Environmental Nanotechnology, Monitoring and Management
(2022)
Article
Engineering, Environmental
Sona Bakhshizadeh et al.
Summary: In this study, novel membranes were developed using tea filter bags as a base substrate and coated with a casting solution containing PVDF and MIRFM. The PVDF/MIRFM membranes showed excellent properties for the filtration of EB. The results demonstrated that the use of MIRFM as a filler in the membranes was an effective and selective approach for EB removal.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING
(2022)
Article
Chemistry, Physical
Mahboobeh Abbasi et al.
Summary: A novel grass-like structured composite membrane was successfully fabricated in this study, showing excellent performance in the removal of malachite green. The adsorption process followed a pseudo second-order kinetic model, with a maximum adsorption capacity of 13.49 mg g-1. Thermodynamic study revealed that the adsorption of malachite green onto the composite membrane was an endothermic process.
APPLIED CLAY SCIENCE
(2021)
