☆ 4.7 Article

Visible-light-driven peroxymonosulfate activation by robust TiO2-base nanoparticles for efficient removal of sulfamethoxazole

ENVIRONMENTAL POLLUTION (2023)

Related references

Note: Only part of the references are listed.

Article Environmental Sciences

O and S co-doping induced N-vacancy in graphitic carbon nitride towards photocatalytic peroxymonosulfate activation for sulfamethoxazole degradation

Vasudha Hasija et al.

Summary: Doping-induced vacancy engineering of graphitic carbon nitride (GCN) with oxygen and sulphur co-doping was performed to activate per-oxymonosulfate (PMS) for sulfamethoxazole (SMX) degradation and H2 production. The co-dopants and N-vacancies synergistically lowered the bandgap, separated electron-hole pairs, and utilized solar energy efficiently. The substitution of sp2 N atom with O and S co-dopants enhanced carrier mobility, increased reactive sites, and facilitated charge-carrier separation. The OSGCN/PMS photo-catalytic system achieved high SMX degradation efficiency and H2 generation rate under visible light irradiation. The study also investigated the intermediates and degradation pathway of SMX.

CHEMOSPHERE (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Tailoring S-scheme-based carbon nanotubes (CNTs) mediated Ag-CuBi 2 O 4 /Bi 2 S 3 nanomaterials for photocatalytic dyes degradation in the aqueous system

Vishal Dutta et al.

Summary: This study successfully reported the S-scheme-based hydrothermal synthesis of Ag-CuBi2O4/CNTs/Bi2S3 layered composites. The photocatalytic activity of nanocomposites with varying weight percent of Bi2S3 for the degradation of methyl orange (MO) and methylene blue (MB) dyes in the visible range was examined. Among the candidates, Ag-CuBi2O4/CNTs/Bi2S3 with a 10% loading of Bi2S3 showed the highest photocatalytic activity. The enhanced performance was attributed to the high surface area, reduced recombination rate of charge carriers, faster separation of photogenerated carriers, and high redox ability. The carbon nanotubes (CNTs) acted as a transfer bridge in the layered structure for electrons. The study provides an economical approach for obtaining a stable semiconductor-based photocatalytic system.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Materials Science, Multidisciplinary

GCN/CuFe2O4/SiO2 photocatalyst for photo-Fenton assisted degradation of organic dyes

Vishal Sonu et al.

Summary: Hybrid ferrite composites were synthesized and characterized using various techniques. The photocatalytic activity of the composites was tested against toxic dyes under visible light illumination. The addition of H2O2 increased the production rate of.OH radicals and enhanced the degradation rate of the dyes. The composites demonstrated high photoactivity and followed pseudo-first order kinetics in the photocatalytic reactions. PL and EIS analysis confirmed enhanced charge separation and migration in the composites. The composites also showed strong chemical stability and efficient generation of reactive species in the photodegradation process.

MATERIALS RESEARCH BULLETIN (2023)

Add to Collection

Article Engineering, Environmental

High-efficiency oxidation of fluoroquinolones by the synergistic activation of peroxymonosulfate via vacuum ultraviolet and ferrous iron

Chuang Wang et al.

Summary: The study investigated the removal efficiency and mechanism of fluoroquinolones using the VUV/Fe2+/PMS process, showing excellent performance at wide initial pH range. The degradation pathways of fluoroquinolones and main inorganic byproducts were thoroughly studied in this synergistic activation process.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Visible-light-driven removal of atrazine by durable hollow core-shell TiO2@LaFeO3 heterojunction coupling with peroxymonosulfate via enhanced electron-transfer

Kexin Wei et al.

Summary: The development of a durable TLFO nanosphere as a heterojunction photocatalyst with PMS has shown efficient removal of ATZ. The TLFO heterojunction demonstrates outstanding herbicidal effects by enhancing charge separation rate and generating reactive oxidant species.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Engineering, Environmental

Magnetic bimetallic Fe, Ce-embedded N-enriched porous biochar for peroxymonosulfate activation in metronidazole degradation: Applications, mechanism insight and toxicity evaluation

Kaibang Xiao et al.

Summary: Bimetallic Fe and Ce-embedded N-enriched porous biochar (Fe-Ce@N-BC) was synthesized and used to activate peroxymonosulfate (PMS) for the removal of metronidazole (MNZ). The Fe-Ce@N-BC/PMS system showed significantly higher degradation efficiency compared to other systems, and the addition of a nitrogen source enhanced the surface area and porosity of the biochar, further improving the activation performance of PMS.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

Activating interfacial S sites of MoS2 boosts hydrogen evolution electrocatalysis

Shuo Geng et al.

Summary: This study activated the interfacial S sites of MoS2 nanosheets by coupling with Ru nanoparticles on the inert basal plane, modulating the electronic structure and optimizing H adsorption. As a result, the Ru-MoS2 catalyst exhibited significantly improved hydrogen evolution reaction performance in both acidic and alkaline solutions, demonstrating the potential for enhancing the activity of other transition metal sulfide electrocatalysts.

NANO RESEARCH (2022)

Add to Collection

Article Engineering, Chemical

Novel 0D-1D-2D nanostructured MCN/NCDs recyclable composite for boosted peroxymonosulfate activation under visible light toward tetracycline degradation

Xueding Jiang et al.

Summary: In this study, a novel nitrogen modified carbon quantum dots decorated graphite carbon nitride/molybdenum heterojunction photocatalyst was synthesized and shown to possess outstanding efficiency for tetracycline removal under visible light. The catalyst exhibited excellent stability and catalytic efficiency in real water matrices, providing a promising strategy for efficient contaminated water treatment.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

A comparison of SMX degradation by persulfate activated with different nanocarbons: Kinetics, transformation pathways, and toxicity

Yanhua Peng et al.

Summary: This study compares the oxidation differences of sulfamethoxazole (SMX) by carbon nanotube (CNT)/peroxymonosulfate (PMS), nanodiamond (ND)/PMS, and PMS direct oxidation systems. The results showed that the reaction rate constant of the CNT/PMS system is significantly higher than the ND/PMS and PMS direct oxidation systems. Product analysis revealed differences in the oxidation mechanism and products among the different oxidation systems. Therefore, the choice of carbon catalyst plays a crucial role in the degradation and toxicity of organic pollutants in wastewater treatment.

APPLIED CATALYSIS B-ENVIRONMENTAL (2022)

Add to Collection

Article Chemistry, Physical

Photo-Oxidation of Glycerol Catalyzed by Cu/TiO2

Osmin Aviles-Garcia et al.

Summary: In this study, glycerol was oxidized to glyceraldehyde, formaldehyde, and formic acid by photocatalysis using copper-doped TiO2 as catalyst. The optimized reaction conditions resulted in high selectivity and formation rate of the products.

CATALYSTS (2022)

Add to Collection

Article Engineering, Chemical

A novel 3D Co/Mo co-catalyzed graphene sponge-mediated peroxymonosulfate activation for the highly efficient pollutants degradation

Hao Liu et al.

Summary: A novel 3D Co/Mo co-catalyzed graphene sponge (SCMG) was developed as a highly efficient heterogeneous catalyst for the rapid and complete elimination of Rhodamine B (RhB). The system exhibited high reactivity over a wide pH range, with 1O2 and SO.-4 as the main reactive oxygen species. SCMG demonstrated good resistance and reusability, making it a promising catalyst for the degradation of common organic contaminants.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Effect of Anions and Cations on Tartrazine Removal by the Zero-Valent Iron/Peroxymonosulfate Process: Efficiency and Major Radicals

Wenqi You et al.

Summary: Zero-valent iron/peroxymonosulfate (Fe-0/PMS) has been studied for its potential in wastewater treatment. Anions and cations have significant effects on the performance of Fe-0/PMS system. This study investigated the influence of various anions and cations on tartrazine removal in the Fe-0/PMS system, and found that certain anions and cations can enhance the removal efficiency.

CATALYSTS (2022)

Add to Collection

Article Chemistry, Physical

Size-Dependent Strong Metal-Support Interactions of Rutile TiO2-Supported Ni Catalysts for Hydrodeoxygenation of m-Cresol

Beilei Cui et al.

Summary: The size of nickel particles has a significant impact on the strong metal-support interactions and hydrodeoxygenation of m-cresol. The TiOx overlayer alters the properties of nickel, enhancing deoxygenation activity. Smaller nickel particles show higher turnover frequency for hydrodeoxygenation.

CATALYSTS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Facet Dependent Activity of Fe(III) Species Modified TiO2 for Simulated Sunlight Driven Fenton-like Reactions

Yang Zhao et al.

Summary: TiO2 crystals with different exposed facets are modified by depositing Fe(III) species. Fe-TiO2 with more (101) facets exposed shows enhanced photoactivity for Bisphenol A (BPA) degradation under simulated sunlight irradiation. This enhancement is attributed to the stronger interfacial charge transfer on Fe-TiO2 (101) and a faster Fe(III)/Fe(II) transformation rate. The accelerated generation of center dot OH and 1O2 on Fe-TiO2 (101) leads to better photoactivity.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Environmental

Peroxymonosulfate activation by iron self-doped sludge-derived biochar for degradation of perfluorooctanoic acid: A singlet oxygen-dominated nonradical pathway

Shiyuan Fu et al.

Summary: In this study, iron species self-doped biochar derived from municipal sludge (ISBC) was synthesized and an efficient activation method of peroxymonosulfate (PMS) for PFOA degradation was explored. The results showed that ISBC had a larger specific surface area and pore volume, facilitating the reaction of surface PMS activation and enhancing PFOA removal. The study also investigated the key active sites and dominant reactive species for PFOA removal in ISBC/PMS system.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Environmental Sciences

Revisiting the Heterogeneous Peroxymonosulfate Activation by MoS2: a Surface Mo-Peroxymonosulfate Complex as the Major Reactive Species

Yibing Sun et al.

Summary: A thorough investigation of the mechanism involved in the activation of peroxymonosulfate (PMS) using molybdenum disulfide (MoS2) as a catalyst has been conducted, revealing a surface Mo-OOSO3- complex as the major reactive species and SO4·- derived from its decomposition as the secondary reactive species. This provides novel perspectives for the mechanistic understanding of heterogeneous PMS-based advanced oxidation processes (AOPs) for water remediation.

ACS ES&T WATER (2022)

Add to Collection

Article Chemistry, Physical

Photoenhanced CO2 methanation over La2O3 promoted Co/TiO2 catalysts

Sana Ullah et al.

Summary: The study showed that illuminating the Co10/Lax-TiO2 catalyst with visible light can enhance the efficiency of CO2 methanation reaction, especially with lanthanum (La) doping, which significantly lowers the activation energy and improves CO2 conversion.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Engineering, Environmental

Visible-light-assisted peroxymonosulfate activation over Fe(II)/V(IV) self-doped FeVO4 nanobelts with enhanced sulfamethoxazole degradation: Performance and mechanism

Junlei Zhang et al.

Summary: The synthesis and application of Fe(II)/V(IV) self-doped FeVO4 nanobelts as a visible-light-assisted PMS activation system showed significantly improved removal of SMX antibiotic pollutants. The system not only effectively degrades SMX, but also can be applied to various actual water bodies such as medicine wastewater and river water.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Chemistry, Physical

Singlet oxygen triggered by robust bimetallic MoFe/TiO2 nanospheres of highly efficacy in solar-light-driven peroxymonosulfate activation for organic pollutants removal

Chencheng Dong et al.

Summary: This study constructed bimetallic MoFe/TiO2 nanospheres, which showed superior performance in degrading organic pollutants under simulated solar light. Photo-generated electrons and transition metallic redox couples played vital roles in the PMS activation process. Different from traditional SR-AOPs, sulfate radicals, hydroxyl radicals, and peroxymonosulfate radicals indeed participated in the generation of singlet oxygen.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Add to Collection

Article Engineering, Environmental

Cu2+/Cu+ cycle promoted PMS decomposition with the assistance of Mo for the degradation of organic pollutant

Haopeng Luo et al.

Summary: In this study, molybdenum powder was utilized as a co-catalyst to enhance the degradation of 2,4-dichlorophenol in the Cu2+/PMS system. The addition of Mo facilitated the rapid reduction of Cu2+ to Cu+, leading to increased PMS activation efficiency. The Mo/Cu2+/PMS system demonstrated improved degradation rates and stability, showing potential for efficient treatment of organic pollutants.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

The Primary Origin of Excellent Dielectric Properties of (Co, Nb) Co-Doped TiO2 Ceramics: Electron-Pinned Defect Dipoles vs. Internal Barrier Layer Capacitor Effect

Theeranuch Nachaithong et al.

Summary: (Co, Nb) co-doped rutile TiO2 nanoparticles were prepared with low dopant concentrations, exhibiting high dielectric permittivity and low loss tangent. Impedance spectroscopy revealed that the ceramics are electrically heterogeneous, with interfacial polarization at internal insulating layers contributing to the low loss tangent.

MOLECULES (2021)

Add to Collection

Article Engineering, Environmental

Insight into heterogeneous catalytic degradation of sulfamethazine by peroxymonosulfate activated with CuCo2O4 derived from bimetallic oxalate

Cheng Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Environmental Sciences

Prussian Blue Analogue-derived co/fe bimetallic nanoparticles immobilized on S/N-doped carbon sheet as a magnetic heterogeneous catalyst for activating peroxymonosulfate in water

Mei-Hsuan Li et al.

CHEMOSPHERE (2020)

Add to Collection

Article Energy & Fuels

Microwave-Assisted Dry and Bi-reforming of Methane over M-Mo/TiO2 (M = Co, Cu) Bimetallic Catalysts

Hoang M. Nguyen et al.

ENERGY & FUELS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Enhanced Photoelectrochemical Properties from Mo-Doped TiO2 Nanotube Arrays Film

Danni Xue et al.

COATINGS (2020)

Add to Collection

Article Engineering, Environmental

The role of carbonate in sulfamethoxazole degradation by peroxymonosulfate without catalyst and the generation of carbonate racial

Yanlong Sun et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Engineering, Environmental

The relation of interface electron transfer and PMS activation by the H-bonding interaction between composite metal and MCM-48 during sulfamethazine ozonation

Shangyi Li et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

Interfacial CoAl2O4 from ZIF-67@gamma-Al2O3 pellets toward catalytic activation of peroxymonosulfate for metronidazole removal

Min-Ping Zhu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Sulfamethoxazole degradation by visible light assisted peroxymonosulfate process based on nanohybrid manganese dioxide incorporating ferric oxide

Ruonan Guo et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2020)

Add to Collection

Article Engineering, Environmental

Efficient Ofloxacin degradation with Co(II)-doped MoS2 nano-flowers as PMS activator under visible-light irradiation

Peng Chen et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Engineering, Environmental

Reactive species in advanced oxidation processes: Formation, identification and reaction mechanism

Jianlong Wang et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Chemistry, Physical

A review on graphitic carbon nitride (g-C3N4) based nanocomposites: Synthesis, categories, and their application in photocatalysis

Mohammed Ismael

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Engineering, Environmental

Carbon nanofibers supported Co/Ag bimetallic nanoparticles for heterogeneous activation of peroxymonosulfate and efficient oxidation of amoxicillin

Yang Zhang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Visible-light-induced activation of peroxymonosulfate by TiO2 nano-tubes arrays for enhanced degradation of bisphenol A

Jialin Jia et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Engineering, Environmental

Hydroxyl radical dominated elimination of plasticizers by peroxymonosulfate on metal -free boron: Kinetics and mechanisms

Wei Ren et al.

WATER RESEARCH (2020)

Add to Collection

Article Engineering, Environmental

Mn-doped g-C3N4 composite to activate peroxymonosulfate for acetaminophen degradation: The role of superoxide anion and singlet oxygen

Jinhong Fan et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Environmental Sciences

Highly efficient degradation of trichloroethylene in groundwater based on peroxymonosulfate activation by bentonite supported Fe/Ni bimetallic nanoparticle

Zhe Li et al.

CHEMOSPHERE (2019)

Add to Collection

Article Engineering, Environmental

Activation of Peroxymonosulfate by Oxygen Vacancies-Enriched Cobalt-Doped Black TiO2 Nanotubes for the Removal of Organic Pollutants

Jonghun Lim et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Engineering, Environmental

One-pot synthesis of a novel hierarchical Co(II)-doped TiO2 nanostructure: Toward highly active and durable catalyst of peroxymonosulfate activation for degradation of antibiotics and other organic pollutants

Hao Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Engineering, Environmental

Nitrogen-doped graphene as peroxymonosulfate activator and electron transfer mediator for the enhanced degradation of sulfamethoxazole

Shizong Wang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Review Engineering, Environmental

Recent advances in photo-activated sulfate radical-advanced oxidation process (SR-AOP) for refractory organic pollutants removal in water

Qi Yang et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Hybrid CuxO-TiO2 Nanopowders Prepared by Ball Milling for Solar Energy Conversion and Visible-Light-Induced Wastewater Treatment

Pradip Basnet et al.

ACS APPLIED NANO MATERIALS (2019)

Add to Collection

Article Engineering, Environmental

Co/Al2O3-EPM as peroxymonosulfate activator for sulfamethoxazole removal: Performance, biotoxicity, degradation pathways and mechanism

Leiduo Lai et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Environmental

Photocatalytic activation of peroxymonosulfate by TiO2 anchored on cupper ferrite (TiO2@CuFe2O4) into 2,4-D degradation: Process feasibility, mechanism and pathway

Masoumeh Golshan et al.

JOURNAL OF HAZARDOUS MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Metal Sulfides as Excellent Co-catalysts for H2O2 Decomposition in Advanced Oxidation Processes

Mingyang Xing et al.

CHEM (2018)

Add to Collection

Review Engineering, Environmental

Graphene- and CNTs-based carbocatalysts in persulfates activation: Material design and catalytic mechanisms

Xiao Chen et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Environmental

Activation CuFe2O4 by Hydroxylamine for Oxidation of Antibiotic Sulfamethoxazole

Jianfei Yan et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)

Add to Collection

Article Chemistry, Physical

Photodegradation of 1-hexyl-3-methylimidazolium by UV/H2O2 and UV/TiO2: Influence of pH and chloride

Ameur Boutiti et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2017)

Add to Collection

Article Chemistry, Physical

Tuning electrochemical catalytic activity of defective 2D terrace MoSe2 heterogeneous catalyst via cobalt doping

Xiaoshuang Chen et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Engineering, Environmental

Oxidation of sulfonamide antibiotics by chlorine dioxide in water: Kinetics and reaction pathways

Weiwei Ben et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Chemistry, Physical

Catalytic oxidation of benzene over Mn modified TiO2/ZSM-5 under vacuum UV irradiation

Haibao Huang et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Add to Collection

Review Chemistry, Physical

Cobalt-catalyzed sulfate radical-based advanced oxidation: A review on heterogeneous catalysts and applications

Peidong Hu et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Add to Collection

Article Engineering, Environmental

Environmental application of graphene-based CoFe2O4 as an activator of peroxymonosulfate for the degradation of a plasticizer

L. J. Xu et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Article Engineering, Environmental

Efficient degradation of sulfamethazine with CuCo2O4 spinel nanocatalysts for peroxymonosulfate activation

Yong Feng et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Review Engineering, Environmental

Pharmaceuticals and personal care products in the aquatic environment in China: A review

Qingwei Bu et al.

JOURNAL OF HAZARDOUS MATERIALS (2013)

Add to Collection

Article Engineering, Manufacturing

Multilayered Mo-Doped TiO2 Nanofibers and Enhanced Photocatalytic Activity

Junqi Li et al.

MATERIALS AND MANUFACTURING PROCESSES (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.