☆ 4.7 Article

3D printed concrete walls reinforced with flexible FRP textile: Automatic construction, digital rebuilding, and seismic performance

ENGINEERING STRUCTURES (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Manufacturing

Mathematical morphology-based point cloud analysis techniques for geometry assessment of 3D printed concrete elements

Sooraj A. O. Nair et al.

Summary: This paper presents a suite of point cloud comparison techniques for 3D printing of cement-based materials, which can be used to quantify the mismatch between the designed and printed systems. It also proposes a print accuracy index and a topological set theory-based approach to evaluate the print quality.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Architecture

The impacts of fabrication systems on 3D concrete printing building forms

Shuyi Huang et al.

Summary: This paper presents a quantitative analysis of the impact of fabrication systems on 3DCP building forms based on 42 completed 3DCP architectural works in the past five years. The study identifies three development trends, including mobile equipment, algorithmic structure, and intelligent construction, which will influence the future development of 3DCP building forms. The paper also discusses the advantages, limitations, and potential of four different 3DCP fabrication systems, aiming to provide directions for further optimization and diversification of 3DCP buildings.

FRONTIERS OF ARCHITECTURAL RESEARCH (2022)

Add to Collection

Review Construction & Building Technology

Life cycle assessment (LCA) and environmental sustainability of cementitious materials for 3D concrete printing: A systematic literature review

Matheus Pimentel Tinoco et al.

Summary: This article presents a literature review on the use of cementitious materials for 3D printing applications in the context of environmental sustainability and the construction sector. It discusses the materials currently used, recent research on more durable and sustainable materials, and the use of Life Cycle Assessment (LCA) to evaluate environmental impacts. The review highlights the need for more studies on LCA for 3D printing and suggests methods for improving the environmental performance of printed concrete.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Compressive load-dominated concrete structures for customized 3D-printing fabrication

Alexander Lin et al.

Summary: This research aims to develop an alternative design-to-fabrication approach for 3D printers, without the need for advanced facilities. By designing concrete blocks as prismatic shapes and using a gantry-based 3D printer for customization and assembly, a wider application of 3D printing for compression-dominated structures was achieved.

AUTOMATION IN CONSTRUCTION (2022)

Add to Collection

Review Engineering, Civil

A review of largescale 3DCP: Material characteristics, mix design, printing process, and reinforcement strategies

Ghafur H. Ahmed et al.

Summary: 3D concrete printing is a promising construction method that offers design flexibility, reduces material waste and costs, and improves construction efficiency and safety. This paper presents a comprehensive review of the latest developments in large-scale 3D concrete printing, including mix characteristics, printing process parameters, and methods of reinforcement.

STRUCTURES (2022)

Add to Collection

Proceedings Paper Engineering, Electrical & Electronic

Study on mechanical properties of in-situ printed reinforced concrete wall with core column

Ying Zhang et al.

Summary: With the lack of manpower and the growing importance of intelligent automation and green environmental protection, 3D printed concrete technology has emerged as a hot topic in the construction industry. This paper focuses on exploring the application of 3D printing technology in in-situ printed components, specifically studying the axial compressive performance of in-situ printed core column reinforced concrete walls. The findings provide new insights into the development of intelligent automation and green environmental protection in the construction industry.

INTERNATIONAL CONFERENCE ON OPTOELECTRONIC MATERIALS AND DEVICES (ICOMD 2021) (2022)

Add to Collection

Review Construction & Building Technology

A systematic review and analysis of the viability of 3D-printed construction in remote environments

Steven J. Schuldt et al.

Summary: 3D-printed construction is a layer-by-layer construction method that has the potential to reduce material consumption, optimize design, decrease construction time, lower labor requirements, and reduce costs compared to conventional construction. Research analyzed the viability of 3D-printed construction as a replacement for conventional construction methods in remote, isolated, or expeditionary environments, and proposed future research directions.

AUTOMATION IN CONSTRUCTION (2021)

Add to Collection

Article Business

DFAB HOUSE: implications of a building-scale demonstrator for adoption of digital fabrication in AEC

Konrad Graser et al.

Summary: DFAB technologies hold great potential in the AEC industry, but its adoption is currently limited and overcoming challenges while developing strategies is crucial for successful implementation. Utilizing DFAB technologies in full-scale construction projects can increase acceptance within the industry and play a pivotal role in establishing new practices for DFAB.

CONSTRUCTION MANAGEMENT AND ECONOMICS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical improvement of continuous steel microcable reinforced geopolymer composites for 3D printing subjected to different loading conditions

Zhijian Li et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Seismic Retrofitting of Traditional Masonry with Pultruded FRP Profiles

Francesca Sciarretta

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Comparative study on the behaviour of textile reinforced concrete slab with engineered cementitious composite slab

M. Chinnasamy et al.

MATERIALS TODAY-PROCEEDINGS (2020)

Add to Collection

Article Construction & Building Technology

A printability index for linking slurry rheology to the geometrical attributes of 3D-printed components

Sabrina Ketel et al.

CEMENT & CONCRETE COMPOSITES (2019)

Add to Collection

Article Mechanics

Using textile reinforced engineered cementitious composite for concrete columns confinement

Ali Nassir Al-Gemeerl et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Review Construction & Building Technology

Additive manufacturing as an enabling technology for digital construction: A perspective on Construction 4.0

Flavio Craveiro et al.

AUTOMATION IN CONSTRUCTION (2019)

Add to Collection

Article Construction & Building Technology

Productivity of digital fabrication in construction: Cost and time analysis of a robotically built wall

Borja Garcia de Soto et al.

AUTOMATION IN CONSTRUCTION (2018)

Add to Collection

Article Construction & Building Technology

Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing

R. J. M. Wolfs et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Mechanics

Mechanical behavior of ultra-high toughness cementitious composite strengthened with Fiber Reinforced Polymer grid

Yu-Zhou Zheng et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Mechanics

Flexural strengthening of RC beams with CFRP grid-reinforced ECC matrix

Xu Yang et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Construction & Building Technology

Experimental investigation of textile reinforced engineered cementitious composite (ECC) for square concrete column confinement

Ali N. AL-Gemeel et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

3D printing of reinforced concrete elements: Technology and design approach

Domenico Asprone et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Experimental Exploration of Metal Cable as Reinforcement in 3D Printed Concrete

Freek P. Bos et al.

MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Flexural behavior of basalt FRP reinforced ECC and concrete beams

Jingming Cai et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Mechanics

Mechanical behavior of FRP sheets reinforced 3D elements printed with cementitious materials

Peng Feng et al.

COMPOSITE STRUCTURES (2015)

Add to Collection

Article Construction & Building Technology

Mechanical properties of structures 3D printed with cementitious powders

Peng Feng et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Engineering, Civil

Strengthening of Infill Masonry Walls with FRP Materials

Dillon S. Lunn et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2011)

Add to Collection

Article Engineering, Civil

Static cyclic response of masonry walls retrofitted with fiber-reinforced polymers

Mohamed A. ElGawady et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2007)

Add to Collection

Article Construction & Building Technology

Automated construction by contour crafting - related robotics and information technologies

B Khoshnevis

AUTOMATION IN CONSTRUCTION (2004)

Add to Collection

Review Construction & Building Technology

Behaviour and strength of FRP-strengthened RC structrues: a state-of-the-art review

JG Teng et al.

PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS (2003)

Add to Collection

Article Engineering, Civil

Flexural capacity of glass FRP strengthened concrete masonry walls

HR Hamilton et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.