☆ 4.7 Article

Research on infrared radiation response and energy dissipation characteristics of sandstone crushing under impact load

ENGINEERING GEOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Research on electromagnetic radiation (EMR) waveform characteristics of coal failure process using Hilbert-Huang transform (HHT)

Shan Yin et al.

Summary: The HHT method is used to analyze and process the EMR waveform of coal failure process, effectively extracting the refined features of EMR waveform signal and improving the identification degree of the precursor characteristics of coal body instability. HHT method has an improved adaptability and superiority in revealing the characteristics of coal deformation and failure.

MEASUREMENT (2022)

Add to Collection

Article Thermodynamics

Strain characteristics and energy dissipation laws of gas-bearing coal during impact fracture process

Xiangguo Kong et al.

Summary: The impact dynamics experiments on gas-bearing coal revealed that reflected energy was generally higher than transmission energy but smaller than incident energy under different loading conditions. Elastic deformation and dissipative energy experienced specific evolutionary trends with time regardless of loading conditions, and the impact of static load and gas pressure on dissipative energy was significant.

ENERGY (2022)

Add to Collection

Article Instruments & Instrumentation

Infrared radiation quantification of rock damage and its constitutive modeling under loading

Liqiang Ma et al.

Summary: This paper presents a quantification approach to investigate the internal damage evolution of loading rock through surface infrared observation. By analyzing the changes in infrared radiation and acoustic counts, the damaged area of the rock can be accurately determined, and a quantitative method for characterizing the evolution of rock damage is established.

INFRARED PHYSICS & TECHNOLOGY (2022)

Add to Collection

Article Geosciences, Multidisciplinary

Study on the acoustic and thermal response characteristics of coal samples with various prefabricated crack angles during loaded failure under uniaxial compression

Zhonghui Li et al.

Summary: This study conducted uniaxial compression tests on coal samples with different-angle prefabricated cracks and analyzed the effects of the crack angles on the mechanical properties, failure modes, and acoustic and thermal characteristics of the samples during loaded failure. The results showed that the crack angle significantly influences the mechanical properties of the coal samples, and the infrared radiation temperature and acoustic emission responses exhibit distinct characteristics in different stages.

JOURNAL OF APPLIED GEOPHYSICS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Electromagnetic radiation signal monitoring and multi-fractal analysis during uniaxial compression of water-bearing sandstone

Hongru Li et al.

Summary: This paper investigates the changes in electromagnetic radiation (EMR) signals of sandstone samples with different water contents and finds that water content has an impact on the signals. The experimental results show that with the increase of water content, the EMR signals of sandstone weaken, and the mechanical strength decreases. Through multifractal analysis, it is discovered that an increase in water content leads to a decrease in the non-uniformity of signals and frequency diversity, which can be considered as precursors of rock failure.

MEASUREMENT (2022)

Add to Collection

Article Engineering, Multidisciplinary

An experimental study on precursor identification for gas-bearing coal failure from electric potential responses in the loading process

Yue Niu et al.

Summary: The occurrence of coal and rock dynamic disasters seriously threatens and restricts the safe production of underground coal mining activities. To prevent and control these disasters, it is necessary to monitor and forecast the damage evolution of coal mass under the joint action of loading stress and gas pressure.

MEASUREMENT (2022)

Add to Collection

Article Engineering, Chemical

Effect of gas adsorption on breakage energy of tectonic coal particles

Chenghao Wang et al.

Summary: Gas adsorption can reduce coal breakage energy and prevent coal and gas outbursts. The increase in adsorption pressure and desorption duration decreases and increases the surface work, respectively. The reduction in surface work is primarily due to gas adsorbed in micropores with a size < 1.5 nm.

POWDER TECHNOLOGY (2022)

Add to Collection

Article Mining & Mineral Processing

Effects of confining pressure on acoustic emission and failure characteristics of sandstone

Zhen Huang et al.

Summary: This study investigated the failure characteristics of sandstone under different confining pressures using AE tests. The results showed that the activity of the AE signal is strongly related to the confining pressure, and the evolution of the Ib value can be divided into fluctuation, stability, and decrease stages.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Mining & Mineral Processing

Experimental study on the infrared precursor characteristics of gas-bearing coal failure under loading

Shan Yin et al.

Summary: This study investigated the infrared precursor characteristics of gas-bearing coal and gas-free coal using a self-developed experimental system. The results showed that gas-bearing coal had both high-temperature and low-temperature anomalous precursors, with different distribution areas compared to gas-free coal.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Instruments & Instrumentation

Identification method of infrared radiation precursor information of coal sample failure and instability under uniaxial compression

He Tian et al.

Summary: This study investigates the effective precursory information of coal sample instability and failure under uniaxial compression by analyzing the variations of infrared radiation temperature. The results show that changes in IRT exhibit different characteristics in different stages of loading, and the variance curve of MIRT can be considered as the most superior precursor signal for identifying coal sample instability and failure.

INFRARED PHYSICS & TECHNOLOGY (2021)

Add to Collection

Article Engineering, Geological

Experimental and numerical investigations on dynamic mechanical responses and failure process of gas-bearing coal under impact load

Xiangguo Kong et al.

Summary: The study investigated the failure process of gas-bearing coal in a complex mining environment, revealing the stress wave variations, stress-strain curves, and fracture evolution through experiments and numerical simulations. The experimental results validated the numerical simulation results, elucidating the formation of high stress areas and their impact on coal specimens.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2021)

Add to Collection

Article Geochemistry & Geophysics

Energy Dissipation and Electromagnetic Radiation Response of Sandstone Samples with a Pre-Existing Crack of Various Inclinations under an Impact Load

Zesheng Zang et al.

Summary: The crack inclination angle and impact energy have a significant impact on the energy dissipation and electromagnetic radiation response of sandstone samples, with the crack inclination causing a first increase and then decrease in damage and electromagnetic radiation as it increases.

MINERALS (2021)

Add to Collection

Article Engineering, Geological

Effect of water on mechanical behavior and acoustic emission response of sandstone during loading process: phenomenon and mechanism

Hongru Li et al.

Summary: The study reveals that water content significantly affects the mechanical behavior and acoustic emission signals of sandstone, with increases in water content leading to decreases in compression strength and elastic modulus, and increases in peak strain and energy dissipation. Acoustic emission energy decreases with water content, and sudden changes in signal characteristics can serve as precursors to rock destabilization and failure.

ENGINEERING GEOLOGY (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Mechanism and monitoring and early warning technology for rockburst in coal mines

Xue-qiu He et al.

Summary: The study highlights significant progress in the prevention and control of rockburst, but also identifies challenges with increasing mining depth. Improved monitoring and warning standards are needed, particularly in relation to complex induction factors and unclear mechanisms. Further research is recommended to explore the trend of rockburst and develop high-reliability sensing technology and equipment for future development.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2021)

Add to Collection

Article Engineering, Geological

Effects of Acid Sulfate and Chloride Ion on the Pore Structure and Mechanical Properties of Sandstone Under Dynamic Loading

Xiaoliang Li et al.

Summary: The research reveals that acidified corrosion significantly alters the pore structure and mechanical behavior of sandstone, resulting in an increase in pore number and volume, effective porosity, and a decrease in dynamic strength.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Add to Collection

Article Engineering, Geological

Stress-Energy Mechanism for Rock Failure Evolution Based on Damage Mechanics in Hard Rock

Chunlai Wang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Acoustic Emission Analysis of Deformation and Damage Processes

N. A. Makhutov

INORGANIC MATERIALS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Health monitoring of reinforced concrete structures with hysteretic dampers subjected to dynamical loads by means of the acoustic emission energy

Gonzalo Cortes et al.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2019)

Add to Collection

Article Engineering, Geological

Energy dissipation and damage evolution analyses for the dynamic compression failure process of red-sandstone after freeze-thaw cycles

Peng Wang et al.

ENGINEERING GEOLOGY (2017)

Add to Collection

Article Engineering, Geological

Energy evolution characteristics of hard rock during triaxial failure with different loading and unloading paths

Diyuan Li et al.

ENGINEERING GEOLOGY (2017)

Add to Collection

Article Geochemistry & Geophysics

On the theory of the microseismic sounding method

T. B. Yanovskaya

IZVESTIYA-PHYSICS OF THE SOLID EARTH (2017)

Add to Collection

Article Engineering, Chemical

Fractal characteristics of crushed particles of coal gangue under compaction

Jixiong Zhang et al.

POWDER TECHNOLOGY (2017)

Add to Collection

Review Engineering, Geological

A review of mechanism and prevention technologies of coal bumps in China

Yaodong Jiang et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2017)

Add to Collection

Article Geochemistry & Geophysics

Electromagnetic Induction Methods in Mining Geophysics from 2008 to 2012

Richard Smith

SURVEYS IN GEOPHYSICS (2014)

Add to Collection

Review Instruments & Instrumentation

Infrared thermography for condition monitoring - A review

S. Bagavathiappan et al.

INFRARED PHYSICS & TECHNOLOGY (2013)

Add to Collection

Article Engineering, Geological

Energy analysis and criteria for structural failure of rocks

Heping Xie et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.