☆ 4.7 Article

An uncoupled ductile fracture model considering void shape change and necking coalescence

ENGINEERING FRACTURE MECHANICS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Effect of material failure criteria on collision behavior of metro vehicle end structures

Xiaorui Wang et al.

Summary: This study comprehensively analyzes the failure behavior of metro vehicle end structures during collisions using stainless steel SUS301L-MT as the research object. The research includes constitutive and failure tests on the material, characterization of its mechanical properties, establishment of two failure criteria, and numerical analysis of different speed levels collisions. The results show the significant influence of stress triaxiality on the failure strain and the superiority of the Generalized Incremental Stress State Dependent Damage Model in describing the collision behavior of metro VESs under complex stress states.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2023)

Add to Collection

Article Engineering, Mechanical

Anisotropic Gurson-Tvergaard-Needleman model considering the anisotropic void behaviors

Hongfei Wu et al.

Summary: In this study, an anisotropic Gurson-Tvergarrd-Needleman (GTN) model considering anisotropic void behaviors was proposed to accurately predict anisotropic ductile fracture. The effect of high stress triaxiality on void nucleation was considered through an additional stress dependent factor, and anisotropic stress triaxiality was adopted. A new formulation related to anisotropic critical damage was proposed to describe the difference in damage accumulations along different material orientations. Uniaxial tension experiments were performed to validate the proposed model, and remarkable improvement was achieved when considering the contribution of high stress triaxiality, anisotropic void nucleation, and critical damage in the modeling of anisotropic ductile fracture.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Engineering, Mechanical

A ductile fracture model incorporating stress state effect

Wang Dou et al.

Summary: This study comprehensively investigates the relationship between material ductility and stress state. By designing special specimens and using a hybrid experimental-numerical method, the study reveals different micromechanisms dominating the failure process under various stress states. A new ductile fracture model is proposed, which can accurately predict the fracture strain.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Engineering, Mechanical

A unified ductile fracture criterion suitable for sheet and bulk metals considering multiple void deformation modes

Lihuang Zheng et al.

Summary: A unified uncoupled ductile fracture criteria (DFC) that can accurately predict the fracture initiation of both sheet and bulk metals is proposed in this study. The new DFC takes into account multiple void deformation modes and the effects of accelerated void growth and coalescence under high stress triaxiality. Experimental results and comparative studies demonstrate the superiority of the new DFC over other existing DFCs. Due to its high accuracy and flexibility, the new DFC is recommended for use in engineering applications and integration with finite element analysis software.

INTERNATIONAL JOURNAL OF PLASTICITY (2023)

Add to Collection

Article Mechanics

A damage sequence interaction model for predicting the mechanical property of in-service aluminium alloy 6005A-T6

Xiaorui Wang et al.

ENGINEERING FRACTURE MECHANICS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

A high-temperature Mohr-Coulomb criterion dependent on temperature, strain rate, and stress state for ductile fracture prediction

Haijun Li et al.

Summary: A highly crack-sensitive steel with Nb micro-alloying was selected as the research material to establish a fracture criterion comprehensively through compression and tension experiments, as well as finite element method (FEM) calculations. Results showed that the criterion accurately described the fracture behavior during hot deformation with distinct stress paths.

MECHANICS OF MATERIALS (2022)

Add to Collection

Article Engineering, Mechanical

Numerical prediction of sheared edge profiles in sheet metal trimming using ductile fracture modeling

Shamik Basak et al.

Summary: This study investigates sheared edges of three automotive sheet metals using experimental and numerical analyses. The Hosford-Coulomb ductile fracture model is calibrated and incorporated into finite element simulations to predict trimmed surface quality and burr formations. Results show differences in shear zone and burr height among TRIP steel, hot-stamped steel, and aluminum alloy 5182, with aluminum alloy being more sensitive to cutting clearance.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

Experimental and numerical investigation of ductile fracture for AA6061-T6 sheets at room and elevated temperatures

Ahmed Kacem et al.

Summary: Warm forming is an effective method for improving the formability of aluminum alloys at room temperature. This study focuses on investigating the influence of temperature and stress state on the ductile fracture of AA6061-T6 aluminum alloy sheet metal. Experimental tests and numerical simulations are conducted to determine the fracture strain and stress state parameters under different conditions. The results show that temperature and stress state have a strong impact on ductile fracture. A modified ductile fracture criterion that considers temperature effects is proposed and evaluated.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

Stress-state dependency of ductile fracture in an extruded magnesium alloy and its underlying mechanisms

Fei-Fan Li et al.

Summary: A comprehensive investigation is conducted on the ductile fracture of an extruded magnesium alloy at various stress states. The study finds that the fracture strain of the magnesium alloy varies with different stress triaxialities and the fracture mechanisms are influenced by second phase particles and deformation twins.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

Add to Collection

Article Engineering, Marine

Development of ductile fracture modelling approach in ship impact simulations

Yue Lu et al.

Summary: A fracture modelling approach is developed to predict fracture behavior in shell element simulations. The approach combines MSSRT and modified BWH criteria to reduce mesh size sensitivity. Bending loads are also considered in the model using a deformation mode indicator. The model is validated by simulating penetration tests and analyzing failed elements in a double hull structure. The results show that the model can accurately capture fracture behavior and is particularly useful in ship impact analysis.

OCEAN ENGINEERING (2022)

Add to Collection

Article Engineering, Civil

A new ductile fracture model for structural metals considering effects of stress state, strain hardening and micro-void shape

Wenchao Li et al.

Summary: In this study, a new micromechanically-motivated phenomenological uncoupled fracture model is proposed for predicting the ductile fracture of structural metals. The model considers the combinative effects of stress state, strain hardening, and micro-void shape, and establishes an explicit and quantitative relationship between the ductility, strength, and microstructure of metals. The model parameters have intuitive physical meanings and can be easily calibrated via conventional tests.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Article Engineering, Civil

Modeling the crashworthiness analysis of functional graded strength thin-walled structure with phenomenological GISSMO model

Minghua Dai et al.

Summary: This paper investigates the use of the phenomenological generalized incremental stress-strain model (GISSMO) to predict the damage-mechanical behavior of quenched boron steel. The study establishes fracture strain vs. stress triaxiality curves for different hardness levels of quenched boron steel and identifies the corresponding damage parameters. The effectiveness of the GISSMO model is validated by examining the crashworthiness of two types of structures fabricated using a tailored partial quenching process. The results show that the GISSMO model accurately predicts the deformation mode and force vs. deformation curve, and significantly improves the predicted accuracy of the crashworthiness.

THIN-WALLED STRUCTURES (2022)

Add to Collection

Review Engineering, Civil

Vehicle collision with RC structures: A state-of-the-art review

Xiuchen Xu et al.

Summary: This paper reviews the current state-of-art in studying RC structures subjected to vehicle collision. The failure modes, influencing factors, and impact force response of different RC structures impacted by vehicular collision are analyzed and divided into three categories. The current techniques for studying vehicle-RC structure collision, such as numerical, experimental, and analytical techniques, are highlighted. It is found that applying reinforcement can effectively mitigate the damage caused by vehicle impact, and the influences of structural factors and reinforcement materials on impact resistance and failure response are reviewed.

STRUCTURES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

A new ductile fracture criterion considering both shear and tension mechanisms on void coalescence

Xifeng Li et al.

Summary: A new ductile fracture criterion is proposed based on void nucleation, growth, and coalescence, with stress triaxiality as the main influence factor. It shows better prediction accuracy and stability compared to other criteria, especially under high stress triaxiality conditions.

INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2021)

Add to Collection

Article Engineering, Mechanical

Ductile fracture of hydrostatic-stress-insensitive metals using a coupled damage-plasticity model

Hui-Min Wang et al.

Summary: A new coupled damage-plasticity model is proposed in this paper to predict the plastic response and ductile fracture of two hydrostatic-stress-insensitive metals. A convenient hybrid experiment-simulation approach is designed to calibrate model parameters, and the geometry transferability of these parameters is validated. The study reveals that the phenomenon of hydrostatic-stress insensitivity in metals results from the combined effect of non-uniformly distributed overall equivalent stress-strain curves.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

Add to Collection

Article Mechanics

A user-friendly anisotropic ductile fracture criterion for sheet metal under proportional loading

Yanshan Lou et al.

Summary: An user-friendly approach was introduced to model the loading direction effect on fracture limits of sheet metals, combined with a newly developed fracture criterion. The method demonstrated high accuracy in predicting anisotropic fracture in different loading conditions for aluminum alloy and steel sheet.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

Add to Collection

Article Mechanics

Ductile fracture prediction of additive manufactured Ti6Al4V alloy based on an extended GTN damage model

Xuan Yang et al.

Summary: Research has shown that the modified GTN model with dual damage variables can effectively describe the fracture behavior of SLM-fabricated Ti6Al4V alloy under complex stress states. By introducing a stress state-dependent function, the model's application has been extended, and a finite element based inverse analysis strategy has been proposed for parameter calibration.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

On the effect of strain and triaxiality on void evolution in a heterogeneous microstructure-A statistical and single void study of damage in DP800 steel

Carl F. Kusche et al.

Summary: The study investigated the influence of the globally applied stress state on damage evolution in mechanically heterogeneous microstructures, such as dual-phase steels. Plastic strain was found to be the major factor influencing the nucleation of new voids, while triaxiality was correlated with the median void size. Void coalescence leading to failure was related to local instabilities in the form of shear band formation and was indirectly determined by the global stress state.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Engineering, Industrial

A new void coalescence mechanism during incremental sheet forming: Ductile fracture modeling and experimental validation

Zhidong Chang et al.

Summary: Studying the enhanced formability of sheet metal through a new void coalescence method and introducing new parameters into the classic GTN model, an extended GTN damage model was developed to describe this new void coalescence mechanism in ISF process. This research revealed the fundamental understanding of improved formability in ISF and demonstrated the comprehensive capability of the extended GTN model in predicting ductile fracture behavior with satisfactory accuracy.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

Add to Collection

Article Mechanics

Cohesive GTN model for ductile fracture simulation

Noe Brice Nkoumbou Kaptchouang et al.

Summary: The study focuses on micromechanical modeling and simulation of crack initiation and propagation in ductile materials using a cohesive-volumetric approach. The proposed cohesive zone model is based on a micromechanical approach and is implemented in the XPER computer code. The efficient cohesive-GTN model is highlighted for its direct derivation of mechanical parameters from the micromechanical approach.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Mechanics

Efficient parameters identification of a modified GTN model of ductile fracture using machine learning

Dong Chen et al.

Summary: An efficient parameter identification strategy for a new damage model was proposed in this research, utilizing a combination of machine learning algorithm including resilient back-propagation neuro network and genetic algorithm, with simulations implemented in terms of ABAQUS/Explicit. The same optimization strategy was used to reduce simulation time.

ENGINEERING FRACTURE MECHANICS (2021)

Add to Collection

Article Engineering, Mechanical

An improved shear modified GTN model for ductile fracture of aluminium alloys under different stress states and its parameters identification

Zao He et al.

Summary: The study proposed an improved shear modified GTN model for predicting ductile fracture of materials under different stress states, and validated the accuracy of the model and feasibility of the damage parameters identification method through FE analysis.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Engineering, Mechanical

Uncoupled ductile fracture criterion considering secondary void band behaviors for failure prediction in sheet metal forming

Hung Quach et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Engineering, Mechanical

Experimental stress state-dependent void nucleation behavior for advanced high strength steels

N. Pathak et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Mechanics

Investigation of deformation damage and fracture in combined stress state for 5052-Al alloy based on experiment and simulation

Xueli Wang et al.

ENGINEERING FRACTURE MECHANICS (2020)

Add to Collection

Article Engineering, Mechanical

Failure prediction on steel sheet under different loading paths based on fully coupled ductile damage model

Z. Yue et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Fracture of laser powder bed fusion additively manufactured Ti-6Al-4V under multiaxial loading: Calibration and comparison of fracture models

Alexander E. Wilson-Heid et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Mechanics

Damage prediction in single point incremental forming using an extended Gurson model

Carlos Felipe Guzman et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

Add to Collection

Article Mechanics

A Lode-dependent Gurson model motivated by unit cell analyses

Lars Edvard Daehli et al.

ENGINEERING FRACTURE MECHANICS (2018)

Add to Collection

Article Engineering, Mechanical

Phenomenological uncoupled ductile fracture model considering different void deformation modes for sheet metal forming

Lei Mu et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

Correlation of the maximum shear stress with micro-mechanisms of ductile fracture for metals with high strength-to-weight ratio

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Article Engineering, Mechanical

Analysis of ductile fracture by extended unified strength theory

Peng Wang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2018)

Add to Collection

Article Engineering, Mechanical

Ductile damage mechanism under shear-dominated loading: In-situ tomography experiments on dual phase steel and localization analysis

Christian C. Roth et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2018)

Add to Collection

Article Materials Science, Multidisciplinary

On the prediction of ductile fracture by void coalescence and strain localization

Tuo Luo et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Void-sheet analysis on macroscopic strain localization and void coalescence

T. F. Guo et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)

Add to Collection

Article Mechanics

A new shear and tension based ductile fracture criterion: Modeling and validation

Qi Hu et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2017)

Add to Collection

Article Mechanics

Modeling of ductile fracture from shear to balanced biaxial tension for sheet metals

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2017)

Add to Collection

Article Mechanics

Modified GTN model for a broad range of stress states and application to ductile fracture

Wei Jiang et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

An incremental stress state dependent damage model for ductile failure prediction

F. X. C. Andrade et al.

INTERNATIONAL JOURNAL OF FRACTURE (2016)

Add to Collection

Article Construction & Building Technology

Ductile fracture of Q460 steel: Effects of stress triaxiality and Lode angle

Wenchao Li et al.

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2016)

Add to Collection

Article Engineering, Industrial

An improved damage evolution model to predict fracture of steel sheet at elevated temperature

B. T. Tang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)

Add to Collection

Article Mechanics

A coupled microvoid elongation and dilation based ductile fracture model for structural steels

Ravi Kiran et al.

ENGINEERING FRACTURE MECHANICS (2015)

Add to Collection

Article Mechanics

Micromechanically-motivated phenomenological Hosford-Coulomb model for predicting ductile fracture initiation at low stress triaxialities

Dirk Mohr et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)

Add to Collection

Article Materials Science, Multidisciplinary

On the energetics of tensile and shear void coalescences

W. H. Wong et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)

Add to Collection

Article Mechanics

A Lode-dependent enhanced Lemaitre model for ductile fracture prediction at low stress triaxiality

T. -S. Cao et al.

ENGINEERING FRACTURE MECHANICS (2014)

Add to Collection

Article Engineering, Mechanical

An extended GTN model for ductile fracture under high and low stress triaxiality

L. Malcher et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Add to Collection

Article Engineering, Mechanical

Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

Add to Collection

Article Mechanics

On the extension of the Gurson-type porous plasticity models for prediction of ductile fracture under shear-dominated conditions

Jun Zhou et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental characterization and numerical modeling of micromechanical damage under different stress states

Mohamed Achouri et al.

MATERIALS & DESIGN (2013)

Add to Collection

Article Engineering, Mechanical

A new approach for ductile fracture prediction on Al 2024-T351 alloy

Akhtar S. Khan et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2012)

Add to Collection

Article Mechanics

New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals

Yanshan Lou et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

Add to Collection

Article Mechanics

Micromechanical analysis on the influence of the Lode parameter on void growth and coalescence

Imad Barsoum et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Application of extended Mohr-Coulomb criterion to ductile fracture

Yuanli Bai et al.

INTERNATIONAL JOURNAL OF FRACTURE (2010)

Add to Collection

Article Mechanics

Numerical simulation of fracture mode transition in ductile plates

Liang Xue et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)

Add to Collection

Article Engineering, Mechanical

On the Application of Stress Triaxiality Formula for Plane Strain Fracture Testing

Yuanli Bai et al.

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2009)

Add to Collection

Article Materials Science, Multidisciplinary

Experimental investigation of void coalescence in metallic sheets containing laser drilled holes

A. Weck et al.

ACTA MATERIALIA (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography

E. Maire et al.

ACTA MATERIALIA (2008)

Add to Collection

Article Mechanics

Constitutive modeling of void shearing effect in ductile fracture of porous materials

Liang Xue

ENGINEERING FRACTURE MECHANICS (2008)

Add to Collection

Article Mechanics

Onset of fracture in high pressure die casting aluminum alloys

Dirk Mohr et al.

ENGINEERING FRACTURE MECHANICS (2008)

Add to Collection

Article Mechanics

Ductile fracture initiation and propagation modeling using damage plasticity theory

Liang Xue et al.

ENGINEERING FRACTURE MECHANICS (2008)

Add to Collection

Article Mechanics

Modification of the Gurson Model for shear failure

K. Nahshon et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2008)

Add to Collection

Article Engineering, Mechanical

A new model of metal plasticity and fracture with pressure and Lode dependence

Yuanli Bai et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2008)

Add to Collection

Article Mechanics

Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading

Liang Xue

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)

Add to Collection

Article Mechanics

Modeling of ductile fracture: Significance of void coalescence

Xiaosheng Gao et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)

Add to Collection

Article Engineering, Mechanical

Calibration and evaluation of seven fracture models

T Wierzbicki et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2005)

Add to Collection

Article Mechanics

Modeling of void growth in ductile solids: effects of stress triaxiality and initial porosity

J Kim et al.

ENGINEERING FRACTURE MECHANICS (2004)

Add to Collection

Article Engineering, Mechanical

On fracture locus in the equivalent strain and stress triaxiality space

YB Bao et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2004)

Add to Collection

Article Nanoscience & Nanotechnology

Void growth in 6061-aluminum alloy under triaxial stress state

H Agarwal et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.