Related references
Note: Only part of the references are listed.Metal foam and fin implementation into a triple concentric tube heat exchanger over melting evolution
M. A. Erfani Moghaddam et al.
THEORETICAL AND APPLIED MECHANICS LETTERS (2022)
Numerical study on latent heat thermal energy storage system with PCM partially filled with aluminum foam in local thermal equilibrium
Bernardo Buonomo et al.
RENEWABLE ENERGY (2022)
Experimental and numerical investigations on the effect of porosity and PPI gradients of metal foams on the thermal performance of a composite phase change material heat sink
Girish Kumar Marri et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Macroscale Modeling of Solid-Liquid Phase Change in Metal Foam/Paraffin Composite: Effects of Paraffin Density Treatment, Thermal Dispersion, and Interstitial Heat Transfer
Yuanpeng Yao et al.
JOURNAL OF THERMAL SCIENCE AND ENGINEERING APPLICATIONS (2021)
Effect of fin-metal foam structure on thermal energy storage: An experimental study
Junfei Guo et al.
RENEWABLE ENERGY (2021)
Melting of PCMs Embedded in Copper Foams: An Experimental Study
Andrea Diani et al.
MATERIALS (2021)
Effect of two different fins (longitudinal-tree like) and hybrid nano-particles (MoS2 - TiO2) on solidification process in triplex latent heat thermal energy storage system
Kh Hosseinzadeh et al.
ALEXANDRIA ENGINEERING JOURNAL (2021)
Modeling of enhanced micro-energy harvesting of thermal ambient fl uctuations with metallic foams embedded in Phase Change Materials
Santiago Madruga
RENEWABLE ENERGY (2021)
Heat transfer enhancement in latent heat thermal energy storage using copper foams with varying porosity
Jie Lei et al.
SOLAR ENERGY (2021)
Effects of wavy wall and Y-shaped fins on solidification of PCM with dispersion of Al2O3 nanoparticle
A. Nematpour Keshteli et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Performance analysis of an improved PCM-to-air heat exchanger for building envelope applications - An experimental study
Mohamed Dardir et al.
SOLAR ENERGY (2020)
Effect of internal fins along with Hybrid Nano-Particles on solid process in star shape triplex Latent Heat Thermal Energy Storage System by numerical simulation
Kh Hosseinzadeh et al.
RENEWABLE ENERGY (2020)
Melting and solidification characteristics of a double-pipe latent heat storage system with sinusoidal wavy channels embedded in a porous medium
Amin Shahsavar et al.
ENERGY (2019)
Thermal modelling of a flat plate solar collector with latent heat storage validated with experimental data in outdoor conditions
Mauricio Carmona et al.
SOLAR ENERGY (2019)
Direct Simulation of Interstitial Heat Transfer Coefficient Between Paraffin and High Porosity Open-Cell Metal Foam
Yuanpeng Yao et al.
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)
Transient performance of a PCM-based heat sink with a partially filled metal foam: Effects of the filling height ratio
Zi-Qin Zhu et al.
APPLIED THERMAL ENGINEERING (2018)
Potential of cascaded phase change materials in enhancing the performance of solar domestic hot water systems
H. M. Teamah et al.
SOLAR ENERGY (2018)
A comprehensive study on the effect of hot water demand and PCM integration on the performance of SDHW system
Mehrdad Shirinbakhsh et al.
SOLAR ENERGY (2018)
Evaluation of solar collector designs with integrated latent heat thermal energy storage: A review
Mohammed Mumtaz A. Khan et al.
SOLAR ENERGY (2018)
Optimization of melting and solidification processes of PCM: Application to integrated collector storage solar water heaters (ICSSWH)
A. Allouhi et al.
SOLAR ENERGY (2018)
Performance evaluation of a flat-plate solar collector filled with porous metal foam: Experimental and numerical analysis
S. Saedodin et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Experimental evaluation of flat plate solar collector using nanofluids
Sujit Kumar Verma et al.
ENERGY CONVERSION AND MANAGEMENT (2017)
Effects of PCM arrangement and natural convection on charging and discharging performance of shell-and-tube LHS unit
Y. B. Tao et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
An alternative approach for assessing the benefit of phase change materials in solar domestic hot water systems
H. M. Teamah et al.
SOLAR ENERGY (2017)
Experimental and computational study of melting phase-change material in a triplex tube heat exchanger with longitudinal/triangular fins
Ammar M. Abdulateef et al.
SOLAR ENERGY (2017)
Melting enhancement in triplex-tube latent heat energy storage system using nanoparticles-metal foam combination
Jasim M. Mahdi et al.
APPLIED ENERGY (2017)
Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media
Yang Xu et al.
APPLIED ENERGY (2017)
Melting heat transfer characteristics of a composite phase change material fabricated by paraffin and metal foam
P. Zhang et al.
APPLIED ENERGY (2017)
Numerical investigation on using of nanofluid in a water-cooled photovoltaic thermal system
Y. Khanjari et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Nanoadditives induced enhancement of the thermal properties of paraffin-based nanocomposites for thermal energy storage
Afolabi L. Owolabi et al.
SOLAR ENERGY (2016)
Evaluation of copper nanoparticles - Paraffin wax compositions for solar thermal energy storage
Saw C. Lin et al.
SOLAR ENERGY (2016)
Experimental analysis of phase change phenomenon of paraffin waxes embedded in copper foams
Simone Mancin et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2015)
Validation of a CFD Melting and Solidification Model for Phase Change in Vertical Cylinders
M. D. Muhammad et al.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS (2015)
Performance evaluation of a solar water heater integrated with a PCM nanocomposite TES at various inclinations
Hussain H. Al-Kayiem et al.
SOLAR ENERGY (2014)
Internal and external fin heat transfer enhancement technique for latent heat thermal energy storage in triplex tube heat exchangers
Abduljalil A. Al-Abidi et al.
APPLIED THERMAL ENGINEERING (2013)
Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins
Abduljalil A. Al-Abidi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Reduction of heat loss from solar thermal collector by diminishing natural convection with high-porosity porous medium
Shigeki Hirasawa et al.
SOLAR ENERGY (2013)
Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin
W. Q. Li et al.
APPLIED THERMAL ENGINEERING (2012)
Experimental investigation on the heat charging process by paraffin filled with high porosity copper foam
H. T. Cui
APPLIED THERMAL ENGINEERING (2012)
Numerical study on melting of paraffin wax with Al2O3 in a square enclosure
A. Valan Arasu et al.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2012)
High performance storage composite for the enhancement of solar domestic hot water systems Part 2: Numerical system analysis
D. Haillot et al.
SOLAR ENERGY (2012)
An experimental investigation on the effect of pH variation of MWCNT-H2O nanofluid on the efficiency of a flat-plate solar collector
T. Yousefi et al.
SOLAR ENERGY (2012)
High performance storage composite for the enhancement of solar domestic hot water systems Part 1: Storage material investigation
D. Haillot et al.
SOLAR ENERGY (2011)
Heat transfer performance analysis of a solar flat-plate collector with an integrated metal foam porous structure filled with paraffin
Zhenqian Chen et al.
APPLIED THERMAL ENGINEERING (2010)
Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs)
C. Y. Zhao et al.
SOLAR ENERGY (2010)
Numerical analysis of the thermal behaviour of a shell-and-tube heat storage unit using phase change materials
Hamid Ait Adine et al.
APPLIED MATHEMATICAL MODELLING (2009)
Preparation, thermal properties and thermal reliability of palmitic acid/expanded graphite composite as form-stable PCM for thermal energy storage
Ahmet Sari et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Validation of CFD simulation for flat plate solar energy collector
Mohamed Selmi et al.
RENEWABLE ENERGY (2008)
Experimental study on the influence of foam porosity and pore size on the melting of phase change materials
K. Lafdi et al.
JOURNAL OF APPLIED PHYSICS (2007)
Thermal behaviour of integrated solar collector/storage unit with 65 °C phase change material
P. C. Eames et al.
ENERGY CONVERSION AND MANAGEMENT (2006)
Some fatty acids used for latent heat storage: thermal stability and corrosion of metals with respect to thermal cycling
A San et al.
RENEWABLE ENERGY (2003)
Thermal and heat transfer characteristics in a latent heat storage system using lauric acid
A Sari et al.
ENERGY CONVERSION AND MANAGEMENT (2002)
On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam
K Boomsma et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2001)
Share Paper
