Effect analysis on energy conversion enhancement of porous medium micro-combustor and thermoelectric system and its optimization

The energy conversion of micro combustion system has become the main research direction at present. However, due to the small size of micro-combustors, they face challenges such as unstable combustion and difficulty in effectively converting generated thermal energy into usable energy. This work mainly studies the thermoelectric conversion system based on porous medium micro-combustor, which mainly uses the high energy density of micro-combustor to replace the traditional battery energy and improve the working time of small equipment. And this work also establishes the coupling model of porous medium micro combustor and thermoelectric module. By analyzing the performance parameters of the micro thermoelectric system in different flow rate, the results show that at low flow rates, semiconductor materials with better thermoelectric performance, such as Bi2Te3, can be used to improve the energy conversion efficiency of the system. However, the low heat release from combustion leads to lower maximum output power. At high flow rates, there is a significant improvement in the thermoelectric conversion performance of the system, but it is limited by the temperature of the thermoelectric materials. To optimize the impact of these factors on micro-thermoelectric systems, the optimization methods were analyzed as: (1) The temperature uniformity of micro-combustor wall can be improved by using mixture with low equivalence ratio and high flow rate; (2) enhancing the thermal conductivity of the microcombustor and porous medium to improve the thermal conductivity of micro thermoelectric system; (3) Using CH4-H2 mixed combustion to reduce combustion temperature and ensure that thermoelectric materials work within the normal temperature range; (4) The segmented thermocouple is used to improve the thermoelectric performance of thermoelectric module. The results show that using a mixture with low equivalence ratio and high flow rate can achieve a maximum conversion efficiency of 5.51%. Using mixed combustion to reduce combustion temperature can increase the maximum output power of the system to 57.8 W.

Automated summary

This study focuses on the thermoelectric conversion system based on porous medium micro-combustor, using the high energy density of micro-combustor to replace traditional battery energy and improve the working time of small equipment. The results show that lower flow rates can improve energy conversion efficiency by using semiconductor materials with better thermoelectric performance, while higher flow rates have a significant impact on thermoelectric conversion performance but are limited by the temperature of thermoelectric materials. Optimization methods include improving temperature uniformity, enhancing thermal conductivity, using mixed combustion, and using segmented thermocouple.