Related references
Note: Only part of the references are listed.
Article
Chemistry, Physical
Md. Munjur Hasan et al.
Summary: The chemical ligand BSBAE was embedded indirectly on mesoporous silica to fabricate optical composite materials (OCM) for detecting and removing toxic cadmium (Cd(II)) ions from wastewater solutions. The OCM demonstrated high sensitivity and selectivity towards Cd(II) ions in acidic pH conditions (pH 3.50) and showed distinguishable color changes upon the addition of trace levels of Cd(II) ions. Other metal ions did not significantly affect the performance of the OCM, which had a detection limit of 0.32 μg/L and a maximum adsorption capacity of 179.65 mg/g for Cd(II) ions. Cd(II) ions could be successfully desorbed from the saturated OCM using 0.25 M HCl, and the regenerated OCM maintained its selectivity and adsorption capacity. However, the adsorption efficiency slightly decreased after multiple cycles. Therefore, the OCM offers a cost-effective and viable alternative for detecting and removing toxic Cd(II) ions from wastewater.
JOURNAL OF MOLECULAR LIQUIDS
(2023)
Article
Chemistry, Physical
Ghaferah H. Al-Hazmi et al.
Summary: A simple synthesis method was used to prepare mesoporous alumina nanorods, which exhibited a high adsorption capacity for the anti-cancer medication DOX. The adsorption behavior of DOX on the alumina nanorods was evaluated under different conditions, and the Langmuir adsorption model was found to fit the data well. The adsorption kinetics followed a pseudo-second-order model, and the adsorption process was endothermic and spontaneous. The alumina nanorods also showed good adsorption performance for DOX in real water samples and could be used for wastewater treatment.
JOURNAL OF MOLECULAR STRUCTURE
(2023)
Review
Materials Science, Multidisciplinary
Aminul Islam et al.
Summary: This article discusses the interest in developing catalytic desulfurization and denitrification to remove toxic or harmful gases before atmospheric emission. A review of new and advanced SOx/NOx mitigation techniques is provided, offering insights into the key features of this field.
PROGRESS IN MATERIALS SCIENCE
(2023)
Article
Chemistry, Multidisciplinary
Abdul Basit Naveed et al.
Summary: TiO2/g-C3N4 nanocomposites were synthesized by a facile, scalable, and inexpensive pyrolysis method using TiO2 nanorods/rice and different percentages of g-C3N4. The nanocomposites were characterized by various techniques. It was found that coupling TiO2 with g-C3N4 remarkably enhanced the photocatalytic activity for biodiesel production. The NC-3 sample, with 15% g-C3N4/TiO2, showed the highest photocatalytic activity with 97% conversion.
Article
Chemistry, Physical
Md. Shad Salman et al.
Summary: This study focuses on the use of chitosan-treated cotton composite material for the removal of toxic dyes in contaminated water. The results reveal that the chitosan-cotton composite has a high adsorption capacity and can efficiently remove dyes, achieving a decolorization effect.
APPLIED SURFACE SCIENCE
(2023)
Article
Agricultural Engineering
Kankana Saikia et al.
Summary: We investigated the catalytic application of sulphonated cellulose based solid carbon catalyst for the conversion of oleic acid to methyl oleate-biodiesel production under microwave irradiation. The optimized reaction conditions using response surface methodology (RSM) were found to be methanol to oleic acid molar ratio (MOMR) of 21:1, 60 min reaction time, 8 wt % catalyst loading, and a temperature of 80 degrees C, resulting in a predicted biodiesel yield of 96.77% and an experimental yield of 97.6 +/- 0.2%. The catalyst showed good recyclability for at least 5 reaction cycles, making it a promising candidate for sustainable biodiesel production.
BIOMASS & BIOENERGY
(2023)
Article
Chemistry, Physical
Khadiza Tul Kubra et al.
Summary: The synthesis of the organic ligand EBMS and its immobilization onto mesoporous silica led to the successful fabrication of a composite adsorbent (FCA) for the separation, adsorption, and recovery of Tm(III) ions. The FCA displayed high kinetic performance and was unaffected by competing metal ions. The adsorption behavior of Tm(III) ions on FCA followed the Langmuir adsorption isotherm model with a maximum adsorption capacity of 168.57 mg/g. The FCA showed strong selectivity and potential for the effective separation and recovery of Tm(III) ions from waste samples.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
(2023)
Article
Engineering, Environmental
Nini Zhang et al.
Summary: Crystal engineering of metal oxide supports is a new strategy to enhance the catalytic performance of noble metal catalysts in catalytic oxidation of CVOCs. Pt catalysts on different crystal phases of TiO2 exhibited varying activity, selectivity, and stability in the oxidation of DCE, with the Pt/TiO2-P catalyst showing optimal performance. The strong interaction between Pt and P25-TiO2, as well as the presence of abundant hydroxyl groups, contributed to the stability and high activity of the Pt/TiO2-P catalyst.
ENVIRONMENTAL SCIENCE & TECHNOLOGY
(2023)
Article
Energy & Fuels
Haiwei Li et al.
Summary: Zeolite-based solid acid catalysts are a promising alternative to liquid acid catalysts for producing eco-friendly plasticizer tributyl citrate (TBC), due to their non-corrosive nature, high hydrothermal stability, and recyclability.
Article
Chemistry, Physical
Md. Shad Salman et al.
Summary: In this study, a functional organic ligand, 4-tert-Octyl-4-((phenyl)diazenyl)phenol (TPDP), was directly immobilized onto mesoporous silica to fabricate a composite adsorbent for the detection and removal of toxic copper (Cu(II)) ions from contaminated water. The composite adsorbent showed high sensitivity and selectivity towards Cu(II) ions, with a limit of detection of 0.28 μg/L. The adsorbent exhibited a high adsorption capacity, with a maximum adsorption capacity of 184.73 mg/g. The Cu(II) ions could be eluted and the adsorbent could be regenerated for reuse. This ligand-based composite adsorbent offers a low-cost and efficient method for the detection and removal of Cu(II) ions in real waste sample treatment.
JOURNAL OF MOLECULAR STRUCTURE
(2023)
Article
Chemistry, Physical
Md Nazmul Hasan et al.
Summary: Organic ligand-based sustainable composite hybrid material (CMHs) was synthesized for the sensitive and selective adsorption of Lu(III) from waste samples. The adsorption of Lu(III) was influenced by solution pH, with slightly acidic conditions chosen for optimal separation and adsorption. Other metal ions did not interfere with Lu(III) adsorption due to the high affinity of Lu(III) to CMHs. The CMHs exhibited a high adsorption capacity and the adsorbed Lu(III) ions were easily eluted for regeneration.
JOURNAL OF MOLECULAR STRUCTURE
(2023)
Article
Biochemistry & Molecular Biology
Qingchao Cheng et al.
Summary: This study focuses on the efficient demulsification of emulsions containing solid particles through the use of electrical dehydration technology and demulsifier agents. The addition of demulsifiers changes the surface state of the solid particles, enhancing the free movement ability of surrounding crude oil molecules and leading to a decrease in the strength of the emulsion film. Under the synergistic effect of demulsifier and electric dehydration, the demulsification rate of the emulsion can reach more than 82%. These findings are significant for the sustainable development of environmentally-friendly oilfields and the efficient treatment of oilfield wastewater.
Article
Materials Science, Ceramics
Basir Maleki et al.
Summary: Fe3O4/SiO2@ZnO nanocomposite was synthesized as a heterogenous catalyst for biodiesel generation from waste cooking oil. The nanocomposite exhibited a specific surface area of 32.56 m(2) g(-1), mean particle size of 10.46 nm, and pore volume of 0.15 cm(3) g-1. The distribution of Si and Zn elements in the lattice of Fe3O4 nanoparticles was successfully achieved. The nanocatalyst showed a maximum biodiesel yield of 97.23% under optimal conditions and could be efficiently reused for seven cycles with a yield of 88.36%. The Fe3O4/SiO2@ZnO nanocatalyst is a promising catalyst for biodiesel generation from waste cooking oil.
CERAMICS INTERNATIONAL
(2023)
Article
Green & Sustainable Science & Technology
Aminul Islam et al.
Summary: In the 21st century, the burning of fossil fuels has posed a serious challenge due to the excessive production of greenhouse gases. By efficiently converting CO2 into renewable fuel using solar energy, we can tackle global warming and the energy crisis simultaneously.
SUSTAINABLE MATERIALS AND TECHNOLOGIES
(2023)
Article
Energy & Fuels
Hong-Meng Li et al.
Summary: The combustion characteristics of ADN-based liquid propellant were studied experimentally in a combustion chamber using electrical ignition. The effects of gas atmosphere and on-load voltage on various parameters such as ignition delay time, peak combustion pressure, ignition energy, total energy, and key reaction products were investigated. It was found that the ignition delay time decreased with increasing ignition voltage, while the gas atmosphere had little effect on it. The highest peak combustion pressure was observed in nitrous oxide atmosphere and the lowest in the argon atmosphere. The ignition energy and total energy decreased with increasing on-load voltage, while the concentration of N2O increased.
Article
Chemistry, Physical
Ahmed Shahat et al.
Summary: A high-potential nanoadsorbent was synthesized and characterized for its efficiency in adsorbing triclosan (TCS) from aqueous solutions. The adsorption equilibrium was found to be influenced by the pH of the solution. The adsorption process followed a chemisorption technique, as evidenced by fitting the adsorption isotherm models to a Langmuir model. The synthesized MCNS adsorbent showed remarkable reusability and renderability, making it suitable for water filtration and industrial wastewater treatment.
JOURNAL OF MOLECULAR LIQUIDS
(2023)
Review
Engineering, Chemical
Tanzim Ur Rahman et al.
Summary: In recent years, research on solar energy-driven photocatalysis materials has gained significant attention due to their potential in addressing the global energy and environmental crisis. However, many semiconductor photocatalysts have a wide band gap, limiting their ability to absorb visible light. Incorporating dopants through plasma-based doping is a highly efficient approach to reduce the band gap and enhance visible light absorption. Plasma-based doping offers advantages such as high reactivity, simplicity, scalability, energy efficiency, homogeneous doping, and flexibility in gas and liquid phase operations. This review discusses recent advancements in plasma-doped semiconductor photocatalysts, their fundamental mechanisms, and their performance in energy and environmental applications.
SEPARATION AND PURIFICATION TECHNOLOGY
(2023)
Article
Engineering, Chemical
Md. Rabiul Awual et al.
Summary: The hybrid donor chemical ligand of THTB was embedded onto inorganic porous silica as HCM for the adsorption and recovery of Eu(III) ions. The adsorption mechanism was described using surface complexation, and the adsorption performance was evaluated under various experimental conditions. The HCM exhibited a high affinity for Eu(III) ions due to the coordination of O-, N-, and S-donor atoms of THTB. The Langmuir adsorption isotherm model was applied to validate the adsorption isotherms, and the adsorption capacity of the HCM was determined to be 176.31 mg/g. The adsorbed Eu(III) ions were effectively eluted from HCM with 0.20 M HNO3 eluent, and the HCM could be regenerated without deterioration. This study has significant applicative utility for the green technology of Eu(III) ion recovery from waste aqueous solutions.
SEPARATION AND PURIFICATION TECHNOLOGY
(2023)
Article
Chemistry, Physical
Md. Munjur Hasan et al.
Summary: In order to protect water quality and human health, a chemical ligand-based conjugate adsorbent was prepared for the selective and sensitive monitoring and removal of toxic lead (Pb(II)) ions from contaminated water. The solution pH played a vital role in both monitoring and removal operations, and pH 3.50 was found to be suitable for simultaneous monitoring and removal of Pb(II) ions.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
(2023)
Article
Chemistry, Physical
Ariyan Islam Rehan et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
(2023)
Article
Environmental Sciences
Guanghua Xia et al.
Summary: In this study, two different types of ZnAl-layered double hydroxide (LDH) mixed metal-oxide composites (CeO2 and SnO2) were synthesized and evaluated for the photodegradation of 4-chlorophenol (4-CP) in wastewater. The SnO2/ZnAl-LDH composite exhibited the best performance, with high stability and recyclability. The reaction mechanism and pathway of 4-CP photodegradation were also investigated, providing valuable insights for organic wastewater treatment.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
(2022)
Article
Energy & Fuels
Shahabaldin Rezania et al.
Summary: The study synthesized a novel catalyst using LaTiO3 nanoparticles, which showed high efficiency and reusability for biodiesel production under optimized conditions.
Review
Green & Sustainable Science & Technology
Siow Hwa Teo et al.
Summary: Textile dye is a significant water pollutant worldwide, especially in developing countries where dumping textile effluent is common. Recycling wastewater is an important option to reduce environmental pollution, and adsorption is a promising method for treating dye-contaminated water. This review critically assesses various adsorbents for dye removal, focusing on efficient adsorbents and cutting-edge processes.
JOURNAL OF CLEANER PRODUCTION
(2022)
Review
Energy & Fuels
AnYao Liu et al.
Summary: This article focuses on the importance of gettering techniques in silicon-based PV devices to improve efficiency, discussing various capture approaches and their impacts on device performance.
SOLAR ENERGY MATERIALS AND SOLAR CELLS
(2022)
Article
Chemistry, Multidisciplinary
Haihui Yu et al.
Summary: A new type of composite photocatalyst PMo12/AgNPs was successfully constructed by combining silver nanosheets with polymolybdate (PMo12), exhibiting efficient visible-light response and photocatalytic activity. The hybrid material showed excellent interfacial charge transfer efficiency and potential application in photocatalysis. The photodegradation experiment demonstrated the high catalytic activity of PMo12/AgNPs under simulated visible light.
Article
Energy & Fuels
Mengli Guo et al.
Summary: This study uses low-cost waste cooking oil and CuO/ZnO photocatalyst transesterification to prepare biodiesel. The optimal reaction conditions were determined and the reaction mechanism and kinetics were explored. The biodiesel produced by this method conforms to standard specifications, achieving waste utilization and cost reduction.
Article
Energy & Fuels
Lihong Guo et al.
Summary: The heterogenization of Keggin-structure heteropoly acids (HPAs) on activated carbon modified with metal ions (Cs+, K+ and Ag+) resulted in efficient solid catalysts for biodiesel production. The 35%H6PV3MoW8O40/AC-Ag hybrid catalyst showed high catalytic performance in transesterification of soybean oil, with good recyclability and resistance to impurities. This novel solid catalyst offers an efficient and sustainable approach for biodiesel production, particularly from low-quality oils.
Article
Chemistry, Physical
Muhammad Irfan et al.
Summary: This study successfully designed and synthesized a La/ZnO/CNTs heterojunction photocatalyst, which showed high photocatalytic efficiency for hydrogen evolution. The characterization results demonstrated that the spatial separation of charge carriers and extended optical absorption towards the visible light spectrum contributed to the improved photocatalytic activity. Additionally, the optimized photocatalyst exhibited excellent cyclic stability.
Review
Nanoscience & Nanotechnology
Christophe Ballif et al.
Summary: This paper reviews the recent evolution of crystalline silicon solar cells, analyzes the current status of research and industrial development, and looks into the future prospects. The improvements in materials and processing have greatly reduced the cost and increased the efficiency of crystalline silicon photovoltaics, making it an important low-cost source of electricity. The paper also discusses the challenges and requirements for other photovoltaic technologies to compete with silicon on the mass market.
NATURE REVIEWS MATERIALS
(2022)
Article
Chemistry, Physical
Guobiao Li et al.
Summary: A novel strategy was proposed to fabricate an efficient and stable NIR photocatalyst by introducing lanthanide-doped ferroelectric perovskites and in-situ etching technology, which achieved charge separation and NIR utilization through constructing heterojunction.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2022)
Article
Agricultural Engineering
Bahar Ghasemzadeh et al.
Summary: This research aims to design and prepare a new magnetically recoverable catalyst based on agrowastes, specifically cotton waste, for the production of biodiesel. The proposed core-shell nanocomposite catalyst showed excellent performance in catalyzing transesterification reaction and achieved optimal results under certain conditions.
INDUSTRIAL CROPS AND PRODUCTS
(2022)
Review
Chemistry, Physical
Bernard Chukwuemeka Ekeoma et al.
Summary: Dry reforming of methane (DRM) is a green alternative for utilizing greenhouse gases and producing syngas. The main limitations of DRM are catalyst sintering and coking. Recent studies have focused on Ni-based catalysts for DRM due to economic constraints on noble metal-based catalysts. Mesoporous silica (MS) supported catalysts show promise due to their high surface areas, thermal stability, and easy availability. However, research on MS as a catalyst support for DRM is still limited.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
(2022)
Article
Thermodynamics
Dong Xiao et al.
Summary: This study highlights the characteristics of deep shale gas drilling process and develops a transient model of wellbore temperature distribution. It emphasizes the effectiveness of insulated drill pipes in reducing wellbore temperature and establishes a system for wellbore cooling and heat energy utilization based on insulated drill pipes and organic Rankine cycle.
APPLIED THERMAL ENGINEERING
(2022)
Article
Chemistry, Physical
Weiqi Guo et al.
Summary: Cobalt oxide nanoparticles with germanium dopants show enhanced performance in electrochemical oxygen evolution and photocatalytic overall water splitting reactions. The doping induces a restructuring of the cobalt oxide structure, leading to the formation of highly active oxyhydroxide phases. Additionally, the combination of p-type Co3Ge2(OH)5 semiconductor with n-type Bi0.5Y0.5VO4 semiconductor leads to a doubled photocatalytic activity in overall water splitting reactions.
Article
Materials Science, Multidisciplinary
Gaurav Pal Singh et al.
Summary: Embedding metal nanoparticles in a dielectric medium improves the performance of plasmonic devices. Simulation of different materials, sizes, shapes, and environments shows that aluminum has the highest peak shift.
BULLETIN OF MATERIALS SCIENCE
(2022)
Article
Chemistry, Physical
Khadiza Tul Kubra et al.
Summary: The study investigated the encapsulation of toxic cationic dye methylene blue (MB) by polymeric natural carbohydrate turmeric powder (TP) adsorbent. The research optimized the MB dye adsorption system and quantified the contributions of adsorption and complexation on MB dye removal by TP adsorbent. The study found that TP adsorbent showed favorable dye capturing ability in neutral pH conditions and could be used for efficient removal of organic dyes from water samples to maintain water quality.
JOURNAL OF MOLECULAR LIQUIDS
(2021)
Article
Chemistry, Analytical
Ahmed Shahat et al.
Summary: In this study, a solid-state sensor for simultaneous detection and adsorption of cadmium ion was successfully fabricated. The sensor exhibited high selectivity and reusability, with the ability to detect ultra-trace levels of Cd(II) ion and a suitable pH of 7.0. The sensor showed a good adsorption capacity and was able to be reused after desorption using HCl without significant loss in performance.
MICROCHEMICAL JOURNAL
(2021)
Article
Chemistry, Analytical
Md Shad Salman et al.
Summary: In developing countries, the lack of analytical infrastructures hinders regular water quality assessments. Affordable and portable analytical technologies are needed for real-time monitoring, and the developed sensor material offers specific detection and removal of toxic lead ions in water, with potential for widespread use in heavy metal pollution monitoring.
MICROCHEMICAL JOURNAL
(2021)
Article
Engineering, Environmental
Yuting Liang et al.
Summary: This study investigated the degradation process of benzene in non-thermal plasma using SVUV-PIMS technology, identifying key products and highlighting the significance of previously overlooked byproducts.
JOURNAL OF HAZARDOUS MATERIALS
(2021)
Article
Thermodynamics
Mengli Guo et al.
Summary: In this study, a highly active and reusable La3+/ZnO-TiO2 photocatalyst was prepared for the esterification of free fatty acids in waste cooking oil, leading to the production of biodiesel through a two-step method. The catalyst showed stable activity and the biodiesel produced met industry standards, validating the potential of La3+/ZnO-TiO2 as a new photocatalyst for biodiesel production.
ENERGY CONVERSION AND MANAGEMENT
(2021)
Article
Chemistry, Analytical
Md Shad Salman et al.
Summary: This study successfully prepared a novel organic ligand-based optical sensor material for detection, adsorption and recovery of Yb(III) ions, with a clear understanding of its performance under optimal experimental conditions.
MICROCHEMICAL JOURNAL
(2021)
Article
Chemistry, Analytical
Md Nazmul Hasan et al.
Summary: The study developed an optical sensor material for sustainable detection and adsorption of cadmium (Cd (II)) ions in aqueous solution, exhibiting enhanced sensitivity and distinct color response. The sensor showed efficient immobilization of organic ligands for selective capturing of Cd (II) ions even in the presence of coexisting metal ions, with good stability and reusability for various adsorptive removal and detection applications.
MICROCHEMICAL JOURNAL
(2021)
Review
Engineering, Environmental
Aminul Islam et al.
Summary: The usage of synthetic dyes and chemicals in industries leads to the production of contaminated water, causing significant negative impacts on human health. Research and development of efficient adsorbents for the removal of undesirable substances in wastewater are gaining importance in order to address these environmental issues.
RESOURCES CONSERVATION AND RECYCLING
(2021)
Article
Chemistry, Physical
Khadiza Tul Kubra et al.
Summary: The study demonstrates that using whole wheat flour as an adsorbent can effectively remove dyes from wastewater, with a maximum adsorption capacity as high as 162.33 mg/g. The effective pH range for CyV adsorption is in the neutral pH region, and the whole wheat flour adsorbent can selectively remove CyV dye even in the presence of various competing ions.
JOURNAL OF MOLECULAR LIQUIDS
(2021)
Article
Environmental Sciences
Aminul Islam et al.
Summary: The contamination of groundwater by arsenic in Bangladesh is a major threat to the population, and there is a need for cost-effective decentralized filtration units using low-cost adsorbents. Different morphologies of carbon materials synthesized through solvothermal method exhibit varying arsenic adsorption capabilities, with nanorod carbon showing excellent adsorption activity at pH 3. Iron hydroxide radicals and energy-induced contact point formation in nanorods are responsible for the high adsorption of arsenic in aqueous solution.
Article
Chemistry, Multidisciplinary
Mahrukh Khan et al.
Summary: Utilizing TiO2/g-C3N4 composite catalyst, biodiesel production from waste cooking oil was optimized with the highest yield of 89.5% achieved under specific catalyst concentration and reaction conditions, meeting fuel standards. The synthesized composite showed high stability and good catalytic activity, making it a promising option for biodiesel production.
Article
Astronomy & Astrophysics
Mario Accolla et al.
Summary: Research has shown that gas-phase reactions of atomic Si with H and H-2 might be a plausible source of silane in carbon-rich asymptotic giant branch stars, although its contribution may be lower compared to formation routes on the surface of dust grains. Additionally, there may be an alternative mechanism for the formation of silane compounds in envelopes around evolved stars.
ASTROPHYSICAL JOURNAL
(2021)
Article
Chemistry, Analytical
Bouteina Bendahmane et al.
Article
Chemistry, Multidisciplinary
Peiwen Lv et al.
Article
Chemistry, Multidisciplinary
Naila Ghani et al.
Article
Chemistry, Inorganic & Nuclear
P. R. Jubu et al.
JOURNAL OF SOLID STATE CHEMISTRY
(2020)
Review
Materials Science, Multidisciplinary
Yuan Pan et al.
Article
Chemistry, Inorganic & Nuclear
Li Kong et al.
DALTON TRANSACTIONS
(2020)
Article
Green & Sustainable Science & Technology
Siow Hwa Teo et al.
JOURNAL OF CLEANER PRODUCTION
(2019)
Article
Chemistry, Multidisciplinary
Rong Zhang et al.
Article
Engineering, Environmental
Siow Hwa Teo et al.
CHEMICAL ENGINEERING JOURNAL
(2018)
Article
Green & Sustainable Science & Technology
Siow Hwa Teo et al.
Article
Chemistry, Physical
F. Dubecky et al.
APPLIED SURFACE SCIENCE
(2017)
Article
Chemistry, Physical
Grisel Corro et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2017)
Article
Chemistry, Multidisciplinary
Dong Liu et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2015)
Article
Agricultural Engineering
Kok Leong Theam et al.
INDUSTRIAL CROPS AND PRODUCTS
(2015)
Article
Chemistry, Physical
Grisel Corro et al.
APPLIED CATALYSIS B-ENVIRONMENTAL
(2013)
Article
Chemistry, Multidisciplinary
Wei Wu et al.
Article
Chemistry, Multidisciplinary
Zhi Wei Seh et al.
ADVANCED MATERIALS
(2012)
Article
Engineering, Chemical
Eng-Seng Chan et al.
JOURNAL OF FOOD ENGINEERING
(2012)
Article
Chemistry, Physical
G. Cabailh et al.
JOURNAL OF PHYSICAL CHEMISTRY A
(2011)
Article
Chemistry, Physical
Yongquan Qu et al.
JOURNAL OF MATERIALS CHEMISTRY
(2010)
Article
Energy & Fuels
Masato Kouzu et al.
Article
Materials Science, Multidisciplinary
S. Carniato et al.
