4.7 Article

Quantifying the effects of different data streams on the calibration of building energy simulation

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Estimating unknown parameters of a building stock using a stochastic-deterministic-coupled approach

Hyunwoo Lim et al.

Summary: Interest in urban building energy modeling for evaluating effective urban energy management and carbon reduction policies is rising. Researchers proposed an urban building energy modeling method using a stochastic-deterministic-coupled approach to overcome limitations of using archetypes. The study verified the identifiability of unknown parameters in a building stock and evaluated the possibility of energy conservation measure analysis in the proposed model.

ENERGY AND BUILDINGS (2022)

Article Energy & Fuels

Impact of occupant related data on identification and model predictive control for buildings

Sicheng Zhan et al.

Summary: This paper bridges the knowledge gaps in the interactions between data requirements, model quality, and control performance by integrating real-world measurements and simulation-based experiments. The results indicate that the usefulness of data is jointly affected by measurement suitability, model complexity, and modeling purpose. The study also reveals the heterogeneous requirements on models from traditional prediction tests and control tasks.

APPLIED ENERGY (2022)

Article Energy & Fuels

A practical deep reinforcement learning framework for multivariate occupant-centric control in buildings

Yue Lei et al.

Summary: This study proposes a practical deep reinforcement learning framework for occupant-centric control of HVAC systems, which considers personalized thermal comfort and occupant presence. The framework achieves multi-dimensional control of the HVAC system in a real environment and shows significant energy savings and improvements in comfort.

APPLIED ENERGY (2022)

Article Construction & Building Technology

The influence and adjust method of hyperparameters' prior distributions in Bayesian calibration for building stock energy prediction

Yi Wang et al.

Summary: Energy consumption in the building sector is significant and accurate prediction is crucial for urban energy planning. The Bayesian Calibration model has been widely used, but previous research did not consider the matching between calibrated parameters and the actual situation, leading to large deviations. This study proposed a method to adjust the hyperparameter prior distribution in the Bayesian calibration, which significantly improved the prediction performance and provided more accurate energy consumption prediction after energy retrofit.

ENERGY AND BUILDINGS (2022)

Article Energy & Fuels

Impact of occupant related data on identification and model predictive control for buildings

Sicheng Zhan et al.

Summary: This paper explores the importance of data usage in building control and conducts experiments in various spatial environments. The results indicate that the effectiveness of data is jointly affected by measurement suitability, model complexity, and modeling purpose in achieving satisfactory prediction and control performance.

APPLIED ENERGY (2022)

Article Thermodynamics

Automated recognition and mapping of building management system (BMS) data points for building energy modeling (BEM)

Sicheng Zhan et al.

Summary: With the advancement of IoT and BMS in modern buildings, there is an opportunity to extend the use of building energy modeling beyond the design phase. However, the need to interpret and manually map BMS data before energy analysis is labor-intensive and requires comprehensive knowledge due to different rules applied by suppliers and sensor installers.

BUILDING SIMULATION (2021)

Article Energy & Fuels

Bayesian calibration of building energy models for uncertainty analysis through test cells monitoring

Carmen Maria Calama-Gonzalez et al.

Summary: This paper presents the application of a Bayesian calibration approach to improve the energy efficiency of buildings, showing that the combination of sensitivity analysis and Bayesian calibration techniques can enhance the agreement between on-site measurements and simulated outputs.

APPLIED ENERGY (2021)

Article Construction & Building Technology

Influence of data acquisition on the Bayesian calibration of urban building energy models

Stanley Risch et al.

Summary: Urban building energy models are crucial for estimating heat demand and planning energy saving measures. Archetype solutions and Bayesian calibration can help reduce uncertainty in parameter values. Calibration results show that starting with more specified parameters leads to less error, and using different periods of real measurement data can yield similar data fit.

ENERGY AND BUILDINGS (2021)

Article Construction & Building Technology

Forecasting building occupancy: A temporal-sequential analysis and machine learning integrated approach

Jin Yuan et al.

Summary: Building occupancy is crucial for building energy simulations, operations, and management. Occupancy forecasting, based on occupancy data and machine learning methods, plays a key role in energy conservation and optimizing the use of renewable energy sources.

ENERGY AND BUILDINGS (2021)

Review Construction & Building Technology

Calibrating building energy simulation models: A review of the basics to guide future work

Adrian Chong et al.

Summary: This study provides a foundation for future research by conducting a detailed systematic review of vital aspects of BES calibration through meta-analysis and categorization. Reproducible simulations are identified as a critical issue, and an incremental approach is proposed to encourage future research's reproducibility.

ENERGY AND BUILDINGS (2021)

Article Engineering, Mechanical

Structural model updating using adaptive multi-response Gaussian process meta-modeling

K. Zhou et al.

Summary: The paper presents an efficient framework based on Gaussian process emulation for inverse identification of model parameters, using a multi-response Gaussian process meta-modeling approach to construct error response surfaces. An adaptive sampling strategy and two stochastic optimization techniques are employed for training the model, resulting in accurate and robust model updating.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Article Energy & Fuels

Occupancy data at different spatial resolutions: Building energy performance and model calibration

Adrian Chong et al.

Summary: This study investigates the impact of different spatial resolutions of occupancy data on building energy use prediction accuracy, finding that deriving occupancy and plug-load schedules from WiFi data can improve the accuracy of building energy models. However, increasing spatial resolution may lead to trade-offs between parameter uncertainty and model bias/inadequacy.

APPLIED ENERGY (2021)

Article Green & Sustainable Science & Technology

Data requirements and performance evaluation of model predictive control in buildings: A modeling perspective

Sicheng Zhan et al.

Summary: This study explores the potential of MPC in improving building performance and saving energy, identifies the main factors hindering its application, and suggests future research directions to address these challenges. By categorizing past studies and comparing data requirements, the study provides insights for future research on the relationship between data requirements, model performance, and control performance.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Computer Science, Artificial Intelligence

Multi-output Gaussian process prediction for computationally expensive problems with multiple levels of fidelity

Quan Lin et al.

Summary: The proposed multi-fidelity multi-output Gaussian process (MMGP) model achieves a balance between high prediction accuracy and low computational cost when dealing with data with multiple correlated outputs. It provides more accurate predictions than other methods, especially when using heterotopic training data. In aerodynamic prediction examples, the MMGP model reduces the root-mean-square error (RMSE) for the drag coefficient by 30%-40% compared to other multi-fidelity modeling methods.

KNOWLEDGE-BASED SYSTEMS (2021)

Editorial Material Engineering, Biomedical

Synthetic data in machine learning for medicine and healthcare

Richard J. Chen et al.

Summary: The proliferation of synthetic data in artificial intelligence for medicine and healthcare has raised concerns about the vulnerabilities of the software and the challenges faced by current policies.

NATURE BIOMEDICAL ENGINEERING (2021)

Article Geochemistry & Geophysics

BayMBT: A Bayesian calibration model for branched glycerol dialkyl glycerol tetraethers in soils and peats

Emily Dearing Crampton-Flood et al.

GEOCHIMICA ET COSMOCHIMICA ACTA (2020)

Article Construction & Building Technology

Generative adversarial network for fault detection diagnosis of chillers

Ke Yan et al.

BUILDING AND ENVIRONMENT (2020)

Article Computer Science, Interdisciplinary Applications

Uncertainty propagation of frequency response functions using a multi-output Gaussian Process model

Jun Lu et al.

COMPUTERS & STRUCTURES (2019)

Article Construction & Building Technology

Parameter identifiability in Bayesian inference for building energy models

Dong Hyuk Yi et al.

ENERGY AND BUILDINGS (2019)

Article Computer Science, Artificial Intelligence

Physics-aware Gaussian processes in remote sensing

Gustau Camps-Valls et al.

APPLIED SOFT COMPUTING (2018)

Article Construction & Building Technology

Guidelines for the Bayesian calibration of building energy models

Adrian Chong et al.

ENERGY AND BUILDINGS (2018)

Article Mathematics, Interdisciplinary Applications

A tutorial on Gaussian process regression: Modelling, exploring, and exploiting functions

Eric Schulz et al.

JOURNAL OF MATHEMATICAL PSYCHOLOGY (2018)

Article Computer Science, Artificial Intelligence

Remarks on multi-output Gaussian process regression

Haitao Liu et al.

KNOWLEDGE-BASED SYSTEMS (2018)

Article Energy & Fuels

Influences of energy data on Bayesian calibration of building energy model

Hyunwoo Lim et al.

APPLIED ENERGY (2018)

Review Statistics & Probability

Accelerating MCMC algorithms

Christian P. Robert et al.

WILEY INTERDISCIPLINARY REVIEWS-COMPUTATIONAL STATISTICS (2018)

Article Construction & Building Technology

Bayesian calibration of building energy models with large datasets

Adrian Chong et al.

ENERGY AND BUILDINGS (2017)

Article Engineering, Manufacturing

Bayesian Calibration and Uncertainty Quantification for a Physics-Based Precipitation Model of Nickel-Titanium Shape-Memory Alloys

Gustavo Tapia et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)

Article Construction & Building Technology

Identifying informative energy data in Bayesian calibration of building energy models

Wei Tian et al.

ENERGY AND BUILDINGS (2016)

Article Automation & Control Systems

Gaussian process regression with multiple response variables

Bo Wang et al.

CHEMOMETRICS AND INTELLIGENT LABORATORY SYSTEMS (2015)

Article Engineering, Civil

The value of streamflow data in improving TSS predictions - Bayesian multi-objective calibration

A. E. Sikorska et al.

JOURNAL OF HYDROLOGY (2015)

Article Construction & Building Technology

Evaluation of calibration efficacy under different levels of uncertainty

Yeonsook Heo et al.

JOURNAL OF BUILDING PERFORMANCE SIMULATION (2015)

Article Engineering, Multidisciplinary

Bayesian calibration of the constants of the k-ε turbulence model for a CFD model of street canyon flow

Serge Guillas et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)

Article Construction & Building Technology

Decision making of HVAC system using Bayesian Markov chain Monte Carlo method

Young-Jin Kim et al.

ENERGY AND BUILDINGS (2014)

Article Physiology

Determination of parameter identifiability in nonlinear biophysical models: A Bayesian approach

Keegan E. Hines et al.

JOURNAL OF GENERAL PHYSIOLOGY (2014)

Article Computer Science, Artificial Intelligence

Particle swarm optimization for construction of neural network-based prediction intervals

Hao Quan et al.

NEUROCOMPUTING (2014)

Review Green & Sustainable Science & Technology

A review of methods to match building energy simulation models to measured data

Daniel Coakley et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Article Construction & Building Technology

Evaluation of weather datasets for building energy simulation

Mahabir Bhandari et al.

ENERGY AND BUILDINGS (2012)

Article Construction & Building Technology

A comprehensive analysis of the impact of occupancy parameters in energy simulation of office buildings

Elie Azar et al.

ENERGY AND BUILDINGS (2012)

Article Construction & Building Technology

Calibration of building energy models for retrofit analysis under uncertainty

Y. Heo et al.

ENERGY AND BUILDINGS (2012)

Article Construction & Building Technology

Calibrating whole building energy models: Detailed case study using hourly measured data

Paul Raftery et al.

ENERGY AND BUILDINGS (2011)

Review Green & Sustainable Science & Technology

Passive building energy savings: A review of building envelope components

Suresh B. Sadineni et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)

Article Statistics & Probability

Bayesian emulation of complex multi-output and dynamic computer models

Stefano Conti et al.

JOURNAL OF STATISTICAL PLANNING AND INFERENCE (2010)

Article Statistics & Probability

Computer model calibration using high-dimensional output

Dave Higdon et al.

JOURNAL OF THE AMERICAN STATISTICAL ASSOCIATION (2008)

Review Statistics & Probability

Strictly proper scoring rules, prediction, and estimation

Tilmann Gneiting et al.

JOURNAL OF THE AMERICAN STATISTICAL ASSOCIATION (2007)

Article Mathematics, Applied

Combining field data and computer simulations for calibration and prediction

D Higdon et al.

SIAM JOURNAL ON SCIENTIFIC COMPUTING (2004)

Article Statistics & Probability

Bayesian calibration of computer models

MC Kennedy et al.

JOURNAL OF THE ROYAL STATISTICAL SOCIETY SERIES B-STATISTICAL METHODOLOGY (2001)