☆ 4.7 Article

The properties of sustainable aviation fuel I: Spray characteristics

ENERGY (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

Numerical simulation of working process and gas-liquid interaction mechanism of air assisted nozzle

Jin Zhao et al.

Summary: The air assisted nozzle can achieve good atomization of high viscosity fuel at low injection pressure. However, there are still few studies on the gas-liquid flow inside the nozzle, leading to unclear understanding of its working mechanism, which hinders its practical application.

INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2023)

Add to Collection

Article Thermodynamics

Effects of chamber pressure on the kinematic characteristics of spray flows exhausted from an airblast atomizer

Zichen Zhang et al.

Summary: The study investigated the air-liquid interactions in spray flows from an airblast atomizer at different ambient pressures, finding that the kinematic characteristics of spray droplets changed significantly with increasing chamber pressure. Higher chamber pressure led to greater aerodynamic forces on the droplets, promoting the breakup of larger droplets into finer droplets and increasing kinematic similarity between droplets and airflow.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2022)

Add to Collection

Article Thermodynamics

Spray characteristics of standard and alternative aviation fuels at high ambient pressure conditions

Dongyun Shin et al.

Summary: The study investigated spray characteristics of standard and alternative aviation fuels using a HPSA atomizer at high ambient pressure conditions. It was found that the Sauter Mean Diameter (D32) significantly decreased with increasing ambient pressure, but the trend was limited at higher pressures. The feasibility of the Laser Sheet Drop-Sizing (LSD) technique for high ambient pressure application was examined using fuel-PLIF and Mie scattering imaging.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2022)

Add to Collection

Article Energy & Fuels

A morphological study of supercritical fuel flash-boiling spray

Qinglin Xu et al.

Summary: Fuel injection optimization is crucial for cleaner and more efficient engines, with the study of supercritical fuel flash-boiling spray behavior and characteristics still lacking. The research found that the spray structure of supercritical fuel flash-boiling is similar to highly under-expanded jet, with unique transient formation process.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Production of hydro-processed renewable jet fuel over SAPO-11-based catalyst

Elbert Halim et al.

Summary: This study investigates the role of single-metal-loaded SAPO-11-based catalysts in producing renewable jet fuel. Among the metals tested, nickel-loaded SAPO-11 showed the highest conversion rate, with Ni/SAPO-11(CA) displaying higher selectivity towards the carbon chain length of jet fuel compared to Ni/SAPO-11. Operating conditions such as temperature, pressure, and H-2-to-feedstock ratio were optimized using the Taguchi method, resulting in a high conversion rate to HRJ with a favorable isomer-to-normal alkane ratio.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Review Chemistry, Applied

Progress in experimental investigations on evaporation characteristics of a fuel droplet

Zhaowen Wang et al.

Summary: This paper provides a systematic review on the droplet evaporation characteristics of different fuels. It introduces experimental methods and mechanisms of droplet evaporation. The study finds that the evaporation of droplets is influenced by various factors such as composition, concentration, and the addition of nanoparticles. Future research should focus on advanced experimental and numerical methods, and the integration of droplet evaporation with spray and combustion processes.

FUEL PROCESSING TECHNOLOGY (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental study on ignition and combustion characteristics of biodiesel-butanol blends at different injection pressures

Qiankun Zhang et al.

Summary: This study investigates the ignition and combustion characteristics of biodiesel-butanol blends at different injection pressures. The results show that the ignition delay times of all tested fuels increase with decreased injection pressure or increased n-butanol proportion. Increasing the injection pressure or n-butanol proportion could increase the ignition distance, while decreasing the combustion duration and the variation rate of flame area and spatially integrated natural luminosity. The addition of a large proportion of n-butanol leads to a larger flame fluctuation, which is not beneficial for ignition and combustion processes.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Add to Collection

Article Energy & Fuels

Mechanism of flash boiling bubble breakup based on rim-like structure

Shangning Wang et al.

Summary: Flash boiling is a significant phenomenon in internal multiphase flow, which leads to unique spray structures. Although many studies have been conducted on this phenomenon, the detailed transition mechanism from in-nozzle bubble to out-nozzle spray droplets has not been experimentally observed, and existing theories fail to explain the morphology change in micro-scale droplets with high velocities.

FUEL (2022)

Add to Collection

Article Energy & Fuels

Experimental study of the spray ignition characteristics of hydro-processed renewable jet and petroleum jet fuels in a constant volume combustion chamber

Akhmad Faruq Alhikami et al.

Summary: This study investigated the spray ignition characteristics of different fuels under various conditions, finding that hydroprocessed renewable jet fuel exhibited faster reactivity and that the reactivity of all fuels increased with chamber pressure.

FUEL (2021)

Add to Collection

Article Thermodynamics

Analytical and experimental study on boiling vaporization and multi-mode breakup of binary fuel droplet

Xi Xi et al.

Summary: This study investigated the boiling vaporization and breakup of single droplets of n-butanol, n-hexadecane and their binary mixtures with 10-50 w.t.% n-butanol. Experimental results showed that bi-component droplets exhibit strong two-phase flow instability, experiencing fluctuation evaporation between the transient heating and stable evaporation stages. The droplet vaporization characteristics gradually shift from normal evaporation to partial rupture or passive breakup, eventually leading to micro explosion and significantly reducing droplet lifetime.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Energy & Fuels

A study of the sooting behavior of hydro-processed renewable jet and petroleum jet fuels in a laminar counter-flow flame

Hsiang-Chun Hsieh et al.

Summary: This study investigated the soot formation behavior of hydro-processed renewable jet and petroleum jet fuels, revealing that petroleum jet fuels produce higher soot volume fractions, while renewable jet fuels with higher H/C ratio yield lower soot volume fractions. The smoke point results were positively correlated with the soot volume fractions of all tested fuels.

FUEL (2021)

Add to Collection

Article Energy & Fuels

Experimental study of flash boiling spray with isooctane, hexane, ethanol and their binary mixtures

Junhao Yan et al.

Summary: The study aimed to investigate the effects of fuel properties on flash boiling sprays using multihole injectors. It was found that adding ethanol or hexane to isooctane enhanced flash boiling by increasing vapor pressure. Sprays with ethanol blends exhibited more severe flash boiling than those with hexane blends at certain ratios, with differences in liquid penetration and dispersion. Droplet size decreased with increasing hexane content, while noticeable reductions were observed with 10% ethanol content. However, higher ethanol blend ratios did not further decrease droplet size due to vaporization inhibition.

FUEL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental study of spray analysis for Palmarosa biodiesel-diesel blends in a constant volume chamber

Ramalingam Sathiyamoorthi et al.

Summary: The study analyzed the spray properties of Palmarosa oil methyl esters fuel and compared them with mineral diesel under different injection pressures. The results showed differences in spray characteristics between biodiesel and diesel at high pressures, indicating the potential of Palmarosa oil methyl ester in diesel engines.

ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2021)

Add to Collection

Article Energy & Fuels

Droplets velocity and diameter variations of wall impinging spray created by slicer

Feixiang Chang et al.

Summary: The study investigated the droplet behavior of impinging spray in direct-injection spark-ignition engines. The results showed that with an increase in injection pressure, droplet velocity at the spray tip increased dramatically, and the atomization was greatly improved. Moreover, an increase in injection pressure led to a wider range of Weber number distribution of droplets.

FUEL (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainable aviation fuels and imminent technologies - CO2 emissions evolution towards 2050

Ivo Abrantes et al.

Summary: The aviation industry has promoted various approaches to reduce CO2 emissions, including improving aircraft technology and using sustainable low-carbon fuels. However, achieving carbon-neutral growth and a 50% reduction in net emissions by 2050 compared to 2005 levels will require a combination of imminent aircraft technologies with a higher introduction of Sustainable Aviation Fuel (SAF). Results show that these goals cannot be met solely by the current strategies, and carbon-neutral growth may only be possible by 2040 with the right combination of technologies and SAF introduction rates.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Energy & Fuels

The production of bio-jet fuel from palm oil derived alkanes

Cheng-Han Lin et al.

FUEL (2020)

Add to Collection

Article Multidisciplinary Sciences

Assessing fuel properties effects of 2,5-dimethylfuran on microscopic and macroscopic characteristics of oxygenated fuel/diesel blends spray

Peng Zhang et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Review Agricultural Engineering

A review on the production of renewable aviation fuels from the gasification of biomass and residual wastes

M. Shahabuddin et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Direct conversion of glyceride-based oil into renewable jet fuels

Cheng-Han Lin et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

The production of renewable aviation fuel from waste cooking oil. Part II: Catalytic hydro-cracking/isomerization of hydro-processed alkanes into jet fuel range products

Yu-Kai Chen et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Energy & Fuels

Large eddy simulations of turbulent combustion of kerosene-air in a dual swirl gas turbine model combustor at high pressures

Dongxin Huang et al.

FUEL (2020)

Add to Collection

Article Engineering, Chemical

Effects of spraying pressure and installation angle of nozzles on atomization characteristics of external spraying system at a fully-mechanized mining face

Shibo Yang et al.

POWDER TECHNOLOGY (2019)

Add to Collection

Article Energy & Fuels

Experimental study of the spray collapse process of multi-hole gasoline fuel injection at flash boiling conditions

Shengqi Wu et al.

FUEL (2019)

Add to Collection

Article Thermodynamics

Experimental study of the spray, combustion, and emission performance of a diesel engine with high n-pentanol blending ratios

Mingzhang Pan et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Review Thermodynamics

Biomass-derived aviation fuels: Challenges and perspective

Meng Wang et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Simultaneous study on spray liquid length, ignition and combustion characteristics of diesel and hydrogenated catalytic biodiesel in a constant volume combustion chamber

Tamilselvan Pachiannan et al.

RENEWABLE ENERGY (2019)

Add to Collection

Article Energy & Fuels

Optical diagnostics of low-temperature ignition and combustion characteristics of diesel/kerosene blends under cold-start conditions

Zhicheng Shi et al.

APPLIED ENERGY (2019)

Add to Collection

Article Energy & Fuels

Effect of injection pressure and ambient density on spray characteristics of diesel and biodiesel surrogate fuels

Meshack Hawi et al.

FUEL (2019)

Add to Collection

Article Thermodynamics

Numerical and experimental study on the spray characteristics of full-cone pressure swirl atomizers

Yubiao Sun et al.

ENERGY (2018)

Add to Collection

Article Thermodynamics

Comparison of macroscopic spray characteristics between biodiesel-pentanol blends and diesel

Fengyu Li et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2018)

Add to Collection

Article Energy & Fuels

Study on viscosity and surface tension properties of biodiesel-diesel blends and their effects on spray parameters for CI engines

Mithun Das et al.

FUEL (2018)

Add to Collection

Article Energy & Fuels

GDI fuel sprays of light naphtha, PRF95 and gasoline using a piezoelectric injector under different ambient pressures

Zengyang Wu et al.

FUEL (2018)

Add to Collection

Article Thermodynamics

Analysis of evaporation characteristics and heat transfer for flash-boiling sprays

Tianyun Li et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)

Add to Collection

Article Energy & Fuels

Simultaneous capture of liquid length of spray and flame lift-off length for second-generation biodiesel/diesel blended fuel in a constant volume combustion chamber

Da Li et al.

FUEL (2017)

Add to Collection

Review Green & Sustainable Science & Technology

A review on the production processes of renewable jet fuel

C. Gutierrez-Antonio et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Article Biotechnology & Applied Microbiology

Life-cycle analysis of greenhouse gas emissions from renewable jet fuel production

Sierk de Jong et al.

BIOTECHNOLOGY FOR BIOFUELS (2017)

Add to Collection

Article Thermodynamics

Spray and evaporation characteristics of n-pentanol-diesel blends in a constant volume chamber

Yinjie Ma et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Add to Collection

Article Thermodynamics

Experimental study of the injection conditions influence over n-dodecane and diesel sprays with two ECN single-hole nozzles. Part I: Inert atmosphere

Jaime Gimeno et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Add to Collection

Article Thermodynamics

Experimental study of the injection conditions influence over n-dodecane and diesel sprays with two ECN single-hole nozzles. Part II: Reactive atmosphere

Raul Payri et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Add to Collection

Article Thermodynamics

Investigation of the temporal evolution and spatial variation of in-cylinder engine fuel spray characteristics

Wenjin Qin et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Add to Collection

Article Thermodynamics

Fuel spray and combustion characteristics of butanol blends in a constant volume combustion chamber

Yu Liu et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Add to Collection

Article Energy & Fuels

Spray and atomization of diesel fuel and its alternatives from a single-hole injector using a common rail fuel injection system

Pin-Chia Chen et al.

FUEL (2013)

Add to Collection

Article Energy & Fuels

Characterisation of very high pressure diesel sprays using digital imaging techniques

E Delacourt et al.

FUEL (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.