☆ 4.7 Article

Tracing urban carbon footprints differentiating supply chain complexity: A metropolis case

ENERGY (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Identifying the critical paths and sectors for carbon transfers driven by global consumption in 2015

Dongxiao Xu et al.

Summary: The research decomposed carbon emission processes using multi-regional input-output tables, analyzed the tier structure of global carbon transfer paths, traced critical carbon transfer paths, identified key sectors, and provided scientific guidance for global emission reduction policies by understanding the relationships between key paths and sectors.

APPLIED ENERGY (2022)

Add to Collection

Article Thermodynamics

Regional supply chains for decarbonising steel: Energy efficiency and green premium mitigation

Alexandra Devlin et al.

Summary: Decarbonised steel, enabled by green hydrogen-based iron ore reduction and renewable electricity-based steel making, will disrupt the traditional supply chain. Through a case study of Australia-Japan partnership, this research validates that co-locating manufacturing processes with renewable energy resources offers the highest energy efficiency and cost reduction. However, there are challenges in terms of increased energy consumption and cost when steel production is co-located with iron ore and renewable energy resources, compared to direct export to remote steel producers.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Environmental

Large inter-city inequality in consumption-based CO2 emissions for China's pearl river basin cities

Yukun Qian et al.

Summary: The consumption-based carbon emissions of 47 cities in the Pearl River Basin in China vary greatly, with the largest seven cities accounting for over half of the total emissions. Infrastructure development is a major driving force, with construction, heavy industry, and services sectors contributing the most to emissions.

RESOURCES CONSERVATION AND RECYCLING (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Understanding the relationships between the development of the construction sector, carbon emissions, and economic growth in China: Supply-chain level analysis based on the structural production layer difference approach

Yuqi Su et al.

Summary: The study focused on identifying the inter-sectoral relationships between the construction sector and other related sectors in China from 1992 to 2017. It found that sectors such as wholesale and retail trade and finance contribute to economic growth in the construction sector without additional CO2 emissions, while sectors like smelting and processing of metals and transport and storage inhibit economic growth and carbon emissions.

SUSTAINABLE PRODUCTION AND CONSUMPTION (2022)

Add to Collection

Article Construction & Building Technology

Carbon emission reduction decisions in construction supply chain based on differential game with government subsidies

Wei Wang et al.

Summary: This study investigates the carbon emission reduction (CER) decision in the construction supply chain under government subsidies using differential game theory and MATLAB numerical analysis software. The results show that the introduction of cost-sharing contracts can increase the total profit of the construction supply chain and optimize the CER and market demand for low-carbon buildings.

BUILDING AND ENVIRONMENT (2022)

Add to Collection

Article Environmental Sciences

Shared network and supply chain features for synergetic control of carbon and air pollutant emissions

Junnian Song et al.

Summary: The synergetic control of carbon and air pollutant emissions is a continuous effort for China in improving air quality and achieving carbon neutrality. This study investigates the shared intersectoral linkages and key supply chains of emissions using various analytical methods. The findings provide insights for a more effective regulation of key supply chains and a better control of carbon pollution.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Business

Resilience and complexity measurement for energy efficient global supply chains in disruptive events

Esra Ekinci et al.

Summary: This study aims to evaluate the effects of COVID-19 on global supply chains and models the resilience and energy management of these supply chains. The study finds that the impact of the second wave of the pandemic on countries, except for Turkey, is less than the first wave. From a learning effect perspective, it is observed that the economy and foreign trade are less affected in the second wave, despite a higher number of patients. The study also highlights the importance of supply chain resilience and centralized decision making in increasing the resilience of global supply chains.

TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Critical supply chains of NOx emissions in the Beijing-Tianjin-Hebei urban agglomeration

Yun Sun et al.

Summary: China's air pollution policies prioritize differences between cities and emphasize coordinated control of pollutant emissions between cities, particularly in the context of supply chains. In examining the Beijing-Tianjin-Hebei urban agglomeration in China, it is found that nitrogen oxide (NOx) emissions are primarily concentrated in Tangshan and Beijing, with the electricity and heat, metal, and nonmetal sectors being the main suppliers in the NOx supply chains. The transfer pattern of NOx between cities in this region is generally efficient, extending from low- to high-emission intensity cities, while the pattern between cities in this region and other provinces is opposite. The results reveal the potential for emission reduction at the city level, with a focus on reducing the emission intensity of production-oriented cities in the Beijing-Tianjin-Hebei region.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Environmental Sciences

Mapping the changes of CH4 emissions in global supply chains

Ying Liu et al.

Summary: This study examines the consumption-based perspectives and their temporal changes from 2000 to 2014, finding that the Agriculture and Construction sectors were the major contributors to global CH4 emission increases. Along global supply chains, Agriculture and Mining accounted for the majority of CH4 trade at the final consumption stage, while Food and Heavy manufacturing were significant contributors to embodied CH4 emissions in the trade of intermediate goods or services. Furthermore, China surpassed the United States as the largest importer of embodied CH4 emissions in 2014, and India surpassed China as the largest direct emitter for producing final goods or services.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

Add to Collection

Article Environmental Studies

Comparative study on transmission mechanism of supply shortage risk in the international trade of iron ore, pig iron and crude steel

Xiaoqing Hao et al.

Summary: This paper constructs the international steel trade multiplex network using complex network theory and studies the supply risk transmission mechanism. The results show that the supply shortage risk gradually increases, and the key transmission sources are Russia, Australia, Brazil, and other countries. The transmission of supply shortage risk forms a multi-core radiation network structure and creates small associations.

RESOURCES POLICY (2022)

Add to Collection

Article Environmental Studies

A systems dynamics simulation model of a steel supply chain-case study

Mir Ahmad Mohammadi et al.

Summary: This study presents a comprehensive system dynamics model to analyze the impact of different variables on the upstream steel supply chain. The results show that the iron ore grade and supply have a significant influence on the production costs and profits of the steel industry.

RESOURCES POLICY (2022)

Add to Collection

Article Environmental Sciences

China?s pathway to carbon neutrality for the iron and steel industry

Xiang Yu et al.

Summary: As a hard-to-abate sector, the iron and steel industry is responsible for 22% of China's total carbon emissions. To achieve China's carbon peaking and neutrality target, it is crucial to accelerate the application of breakthrough technologies such as carbon capture and storage (CCS) and hydrogen-based steel-making. By combining conventional strategies with net-zero emission technologies, approximately 80-90% emission reduction can be achieved. The future reduction potential of carbon emissions will be influenced by the decarbonization of power systems and the diffusion rate of innovative technologies. Acting sooner and faster is essential to achieve carbon neutrality.

GLOBAL ENVIRONMENTAL CHANGE-HUMAN AND POLICY DIMENSIONS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Exploration in carbon emission reduction effect of low-carbon practices in prefabricated building supply chain

Xiaoyan Wang et al.

Summary: This paper explores the implementation effects of low-carbon practices in the prefabricated building supply chain using a game-based system dynamics model. The results demonstrate that low-carbon practices can effectively mitigate carbon emissions while improving profits for participants. The study highlights the importance of increasing developers' environmental awareness and the continuous promotion of prefabrication for enhancing the effects of low-carbon practices. It also suggests that carbon taxes may not always stimulate the implementation of low-carbon practices, particularly in the initial development stage of prefabricated buildings. This research is significant for PBSC members in adopting low-carbon practices and for government in formulating prospective carbon-reduction policies.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Environmental Sciences

Decoupling of economic and carbon emission linkages: Evidence from manufacturing industry chains

Boqiang Lin et al.

Summary: This paper analyzes the impact of the industrial chain structure on the economic linkage and carbon emission linkage of the manufacturing industry by comparing the supply-driven and demand-pull industrial chain structures. The results show that the optimization of the industrial chain structure can increase economic linkage and reduce carbon emission linkage.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)

Add to Collection

Article Economics

Contributors and drivers of Chinese energy use and intensity from regional and demand perspectives, 2012-2015-2017

Junna Yan et al.

Summary: The research found that China's energy use exhibits significant regional characteristics, with the Eastern region making the largest contribution. Regional energy use is significantly influenced by investment, consumption, and exports, and is also impacted by sectoral energy intensity and domestic production structure.

ENERGY ECONOMICS (2022)

Add to Collection

Article Environmental Sciences

Evolutionary path and driving forces of inter-industry transfer of CO2 emissions in China: Evidence from structural path and decomposition analysis

Qiuping Li et al.

Summary: This study investigates the main paths and factors affecting CO2 emissions in China from 2002 to 2017, revealing an increase in emissions with a gradual slowdown. The non-metallic mineral industry, electricity industry, and metal products industry are identified as key influencing paths. CO2 emission intensity, per capita demand, and intermediate product structure are found to be major driving factors.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Add to Collection

Article Environmental Sciences

Industrial polycyclic aromatic hydrocarbons (PAHs) emissions embodied in domestic trade in China in 2012

Shiya Zhao et al.

Summary: This study examines the emissions of PAHs in interprovincial trade in China and emphasizes the importance of consumption-based accounting and critical transfer paths. By using structural path analysis, key pathways that could impact the overall system performance were identified.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Add to Collection

Article Energy & Fuels

Decarbonizing China's iron and steel industry from the supply and demand sides for carbon neutrality

Ming Ren et al.

Summary: The study explores low-carbon transition pathways for China's iron and steel industry to achieve carbon neutrality by 2050, emphasizing the importance of adopting breakthrough technologies in the long term and implementing system-wide cross-sector decarbonization measures to achieve climate change mitigation goals.

APPLIED ENERGY (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Low carbon cities in 2050? GHG emissions of European cities using production-based and consumption-based emission accounting methods

Steve Harris et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Changes and driving forces of urban consumption-based carbon emissions: A case study of Shanghai

Ling Shao et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Reaching net-zero carbon emissions in construction supply chains - Analysis of a Swedish road construction project

Ida Karlsson et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Identifying common paths of CO2 and air pollutants emissions in China

Yu-Sheng Liu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Identifying hotspots of sectors and supply chain paths for electricity conservation in China

Yiyi Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Review Green & Sustainable Science & Technology

Carbon footprint of construction industry: A global review and supply chain analysis

Nuri Cihat Onat et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection

Article Environmental Sciences

Managing the water-energy-food nexus in China by adjusting critical final demands and supply chains: An input-output analysis

Hong-Mei Deng et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Article Engineering, Environmental

Revealing contributions to sulfur dioxide emissions in China: From the dimensions of final demand, driving effect and supply chain

Zhimin Qi et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Add to Collection

Article Environmental Sciences

Embodied carbon emissions in the supply chains of multinational enterprises

Zengkai Zhang et al.

NATURE CLIMATE CHANGE (2020)

Add to Collection

Article Environmental Sciences

How the manufacturing economy impacts China's energy-related GHG emissions: Insights from structural path analysis

Bo Zhang et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2020)

Add to Collection

Article Economics

Mapping China's flows of emissions in the world's carbon footprint: A network approach of production layers

Luis Antonio Lopez et al.

ENERGY ECONOMICS (2020)

Add to Collection

Article Energy & Fuels

Unveiling key drivers of urban embodied and controlled carbon footprints

Shaoqing Chen et al.

APPLIED ENERGY (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Key transmission sectors of energy-water-carbon nexus pressures in Shanghai, China

Xuechun Yang et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Thermodynamics

Energy footprint controlled by urban demands: How much does supply chain complexity contribute?

Shaoqing Chen et al.

ENERGY (2019)

Add to Collection

Article Environmental Sciences

Structural decomposition analysis of embodied carbon in trade in the middle reaches of the Yangtze River

Zhijian Chen et al.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Global embodied rare earths flows and the outflow paths of China's embodied rare earths: Combining multi-regional input-output analysis with the complex network approach

Xibo Wang et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Green & Sustainable Science & Technology

China's CO2 peak before 2030 implied from characteristics and growth of cities

Haikun Wang et al.

NATURE SUSTAINABILITY (2019)

Add to Collection

Article Energy & Fuels

Unfolding the interplay between carbon flows and socioeconomic development in a city: What can network analysis offer?

Shaoqing Chen et al.

APPLIED ENERGY (2018)

Add to Collection

Article Energy & Fuels

Carbon emission imbalances and the structural paths of Chinese regions

Ling Shao et al.

APPLIED ENERGY (2018)

Add to Collection

Article Environmental Sciences

The temporal variation of SO2 emissions embodied in Chinese supply chains, 2002-2012

Xue Yang et al.

ENVIRONMENTAL POLLUTION (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Structural path decomposition of carbon emission: A study of China's manufacturing industry

Yushen Tian et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Add to Collection

Article Environmental Sciences

Critical sectors and paths for climate change mitigation within supply chain networks

Zhen Wang et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2018)

Add to Collection

Article Economics

Structural path analysis of India's carbon emissions using input-output and social accounting matrix frameworks

Yingzhu Li et al.

ENERGY ECONOMICS (2018)

Add to Collection

Article Energy & Fuels

Urban energy-water nexus: A network perspective

Shaoqing Chen et al.

APPLIED ENERGY (2016)

Add to Collection

Article Engineering, Environmental

Betweenness-Based Method to Identify Critical Transmission Sectors for Supply Chain Environmental Pressure Mitigation

Sai Liang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2016)

Add to Collection

Article Thermodynamics

Analysis of impact factors on China's CO2 emissions from the view of supply chain paths

Shusen Gui et al.

ENERGY (2014)

Add to Collection

Article Environmental Sciences

The socioeconomic drivers of China's primary PM2.5 emissions

Dabo Guan et al.

ENVIRONMENTAL RESEARCH LETTERS (2014)

Add to Collection

Article Economics

Structural decomposition analysis applied to energy and emissions: Some methodological developments

Bin Su et al.

ENERGY ECONOMICS (2012)

Add to Collection

Article Engineering, Environmental

Mapping Flows of Embodied Emissions in the Global Production System

Andrew Skelton et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2011)

Add to Collection

Article Economics

The contribution of Chinese exports to climate change

Christopher L. Weber et al.

ENERGY POLICY (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.