☆ 4.7 Article

Numerical investigation of cylinder vortex-induced vibration with downstream plate for vibration suppression and energy harvesting

ENERGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Marine

Numerical investigation of vortex-induced vibrational responses to a flexible tensioned riser with symmetric grooves in uniform currents

Hao Hu et al.

Summary: The numerical study on the vortex-induced vibration (VIV) of a flexible tensioned cylindrical riser with fixed symmetric grooves is conducted. The hydrodynamics forces and displacements of the riser during vibration are obtained by coupling the Reynolds-averaged Navier-Stokes (RANS) method and Euler-Bernoulli bending beam model. Different configurations of the riser, with varying groove angles and depths, are investigated. The results show that the groove angle of 90 degrees and depths of 0.12D and 0.16D (D is the riser diameter) achieve the best VIV suppression effect.

OCEAN ENGINEERING (2023)

Add to Collection

Article Thermodynamics

Numerical analysis and experiments of an underwater magnetic nonlinear energy harvester based on vortex-induced vibration

Xiaobiao Shan et al.

Summary: This paper designs an underwater magnetic nonlinear piezoelectric energy harvester (PEH) based on the principle of vortex-induced vibration (VIV), which significantly increases system performance by changing the equivalent stiffness through varying magnet position, especially at high flow rates.

ENERGY (2022)

Add to Collection

Review Thermodynamics

A review of flow-induced vibration energy harvesters

Xiaoqing Ma et al.

Summary: This paper comprehensively reviews the recent advances in flow-induced vibration energy harvesters in terms of their working principles, categories, enhancement methods, model derivation and calculation methods, influence of interface circuits, and energy harvesting efficiency calculation methods. The working principles and current development progress of various types of energy harvesters are discussed. Enhancement methods and critical challenges are characterized and summarized. Future research directions and prospects are proposed and discussed.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Mechanical

Coupled vortex-induced modeling for spatially large-curved beam with elastic support

Kunjie Sun et al.

Summary: This study proposes a mathematical model for the forced vibration response of naturally curved beams under elastic boundary conditions, with a focus on large curvature using an improved Van der Pol model to investigate vortex induced vibration or vortex induced divergence response. The theoretical derivation and experimental validation confirm the accuracy of the model, revealing distinct structural responses under different boundary conditions.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Engineering, Civil

Numerical Simulation for Vortex-Induced Vibration (VIV) of a High-Rise Building Based on Two-Way Coupled Fluid-Structure Interaction Method

Bowen Yan et al.

Summary: This study proposes a novel and efficient two-way coupled fluid-structure interaction method ELMS to study the wind-induced responses of high-rise buildings. The ELMS method effectively captures the significant amplification of cross-wind response and lock-in phenomenon, with improved computational efficiency.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2022)

Add to Collection

Article Engineering, Ocean

Suppression of vortex shedding and vortex-induced vibration of a circular cylinder using screen shrouds

Chenlin Sun et al.

Summary: Experiments in wind tunnels showed that screen shrouds with different porosities effectively suppressed vortex-induced vibration of a circular cylinder, delaying its onset and narrowing the lock-on region. Additionally, the shrouds successfully delayed the formation of large-scale vortices in the wake of the cylinder.

APPLIED OCEAN RESEARCH (2022)

Add to Collection

Article Engineering, Electrical & Electronic

A Novel Magnetic-Coupling Non-Contact Piezoelectric Wind Energy Harvester With a Compound-Embedded Structure

Weilin Liao et al.

Summary: In this study, a magnetic-coupling non-contact piezoelectric wind energy harvester with a compound-embedded structure is proposed to enhance power generation performance, environmental adaptability, and reliability. By altering the interference effect of a square plate on a cylinder, the performance improvement and suppression of power generation are achieved. Through simulations and experiments, the feasibility and effectiveness of the proposed harvester are validated.

IEEE SENSORS JOURNAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical research on a vortex shedding induced piezoelectric-electromagnetic energy harvester

Xia Li et al.

Summary: A piezoelectric-electromagnetic hybrid energy harvester based on vortex shedding induced vibration is designed to widen the working wind speed range and improve the output power.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2022)

Add to Collection

Article Engineering, Marine

Vortex-induced vibration of a full-diamond textured cylinder at subcritical Reynolds numbers

Hamid Matin Nikoo et al.

Summary: Textured pipe can significantly mitigate undesired VIV and associated hydrodynamic forces, showing clear advantages over traditional smooth cylinders.

MARINE STRUCTURES (2022)

Add to Collection

Article Engineering, Marine

Experimental study on flow-induced vibration of a circular cylinder with a downstream square plate

Bo Su et al.

Summary: This study investigates the effectiveness of placing a small square plate in the wake of a circular cylinder to suppress or enhance flow-induced vibrations (FIVs). Experimental results show that the size of the plate, the gap distance between the cylinder and plate, and the lateral distance between their centers significantly influence the effectiveness of the downstream square plate.

OCEAN ENGINEERING (2022)

Add to Collection

Article Chemistry, Analytical

Effect of Wind-Induced Vibration on Measurement Range of Microcantilever Anemometer

Yizhou Ye et al.

Summary: This paper investigates the effect of wind-induced vibration on the measurement range of a microcantilever anemometer. The relationship between the anemometer's measurement range and its structural parameters is revealed theoretically and experimentally. The results demonstrate that a shorter and thicker cantilever with larger stiffness can effectively suppress wind-induced vibration and increase the critical speed, thus expanding the measurement range of the microcantilever anemometer.

MICROMACHINES (2022)

Add to Collection

Article Chemistry, Physical

Vortex-induced vibration triboelectric nanogenerator for low speed wind energy harvesting

Lanbin Zhang et al.

Summary: In this study, a novel vortex-induced vibration (VIV) based triboelectric nanogenerator (TENG) is proposed for efficient energy harvesting from low-speed wind. A theoretical model is constructed and validated by experiments to investigate the vibration response and output voltage of the VIV-TENG varying with wind speed. It is found that there is a lock-in region with large vibration amplitude and output voltage. Furthermore, a new model of tandem vortex-induced vibration TENG is designed to broaden the lock-in region.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Rationally Structured Triboelectric Nanogenerator Arrays for Harvesting Water-Current Energy and Self-Powered Sensing

Zichao Deng et al.

Summary: This article demonstrates a high-performance triboelectric nanogenerator that effectively harnesses water-current energy. The researchers introduce novel structures and mechanisms to ensure efficient operation even in deep water. The flexible triboelectric surface can be attached to various surfaces or used independently for sensing and power supply, showing great potential for water-current energy utilization.

ADVANCED MATERIALS (2022)

Add to Collection

Article Engineering, Marine

Coupled cross-flow and in-line vibration characteristics of frequency-locking of marine composite riser subjected to gas-liquid multiphase internal flow

X. P. Chang et al.

Summary: This paper studies the frequency locking characteristics of a marine composite riser in cross-flow and inline directions under the combined action of internal and external ocean currents. The study finds that the internal flow velocity, external current velocity, fiber orientation angle, and top axial tension greatly influence the vibration stability and frequency locking characteristics of the riser.

OCEAN ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Wake galloping energy harvesting in heat exchange systems under the influence of ash deposition

Junlei Wang et al.

Summary: This study proposes a wake galloping energy harvester for heat exchange systems and investigates the effects of different ash deposition types on energy harvesting performance. The results show that the bell-shaped cylinder is more beneficial for energy harvesting, and the optimal configuration is determined with a space ratio of 1.5 between the upstream and downstream cylinders. Both types of ash deposit cylinders can cause the quenching phenomenon, and computational fluid dynamics (CFD) studies explain the underlying mechanisms.

ENERGY (2022)

Add to Collection

Article Engineering, Mechanical

A joint-nested structure piezoelectric energy harvester for high-performance wind-induced vibration energy harvesting

Weilin Liao et al.

Summary: This paper proposes a joint-nested structure piezoelectric energy harvester (JNS-PWEH) to improve the weak power generation performance of existing harvesters. Experimental results show that the performance of the JNS-PWEH has been significantly improved and further optimization of the structure can enhance the output performance. Therefore, the joint nested structure is of great importance in enhancing indirect-excitation piezoelectric energy harvesters.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2022)

Add to Collection

Article Chemistry, Analytical

Two-Degree-of-Freedom Piezoelectric Energy Harvesting from Vortex-Induced Vibration

De Lu et al.

Summary: This paper investigates the aerodynamic characteristics of a two-degree-of-freedom (2DOF) Vortex-Induced Vibration (VIV) Piezoelectric Energy Harvester (VIVPEH) and discovers its ability to generate two lock-in regions for broadband wind energy harvesting. By adjusting circuit and mechanical parameters, the characteristics of the lock-in regions can be customized and optimized.

MICROMACHINES (2022)

Add to Collection

Article Engineering, Marine

Analysis of flow-induced vibration characteristics for flexible riser attached with non-rotating water-drop fairing

Guoqing Jin et al.

Summary: This paper investigates the influence of a water-drop fairing on an offshore riser using the discrete vortex method and finite element method. The results indicate that the non-rotating water-drop fairing can cause intense galloping instability behavior.

OCEAN ENGINEERING (2022)

Add to Collection

Article Engineering, Marine

Interaction of two parallel free oscillating flat plates and VIV of an upstream circular cylinder in laminar flow

Mohammad Jebelli et al.

Summary: The study investigates the effect of adding parallel plates in the wake of a circular cylinder and altering their horizontal and vertical positions on flow-induced vibration. Results show that changes in vertical distance affect vortex shedding suppression mechanism, with smaller vertical distances leading to larger horizontal non-oscillating range and higher amplitudes.

OCEAN ENGINEERING (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Experimental Investigation on Flow-Induced Rotation of Two Mechanically Tandem-Coupled Cylinders

Fang Liu et al.

Summary: This paper investigates the flow-induced rotational motion of tandem double cylinders and conducts a series of experiments in a water tunnel. The results show that different patterns of rotational response and variations in vibration level and maximum arc length ratio can be observed under different spacing ratios.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Engineering, Mechanical

Experimental study on high-mode vortex-induced vibration of stay cable and its aerodynamic countermeasures

Zhiwen Liu et al.

Summary: This study investigates the high-mode vortex-induced vibration (VIV) characteristics of stay cables in cable-stayed bridges and effective suppression measures through experimental research. The results show that stay-cable VIV can be effectively suppressed by increasing the damping ratio under low damping conditions. Helical fillets are found to have limited effectiveness in suppressing high-mode VIV responses.

JOURNAL OF FLUIDS AND STRUCTURES (2021)

Add to Collection

Article Thermodynamics

Harvesting more energy from variable-speed wind by a multi-stable configuration with vortex-induced vibration and galloping

Zhiyong Zhou et al.

Summary: The novel multi-stable harvester aims to scavenge more energy from variable-speed wind by integrating galloping and vortex-induced vibration. Adjusting the distance between magnets can create bi-stability or tri-stability, with the tri-stable configuration outperforming the bi-stable one in wind energy harvesting performance. The tri-stable energy harvester can significantly enhance output voltage and generate large outputs by executing snap-through motions for wind speeds above 1.0 m s(-1).

ENERGY (2021)

Add to Collection

Article Engineering, Mechanical

Enhancing energy harvesting from flow-induced vibrations of a circular cylinder using a downstream rectangular plate: An experimental study

Junlei Wang et al.

Summary: This study experimentally confirmed that placing a rectangular plate at the wake of a circular cylinder can significantly increase the effective wind speed range for energy harvesting. Different spacings between the cylinder and plate led to different effects, with the most effective design scheme being a 2D-high plate located around 0.2D to 0.4D downstream of the circular cylinder.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Design and characterization of an amplitude-limiting rotational piezoelectric energy harvester excited by a radially dragged magnetic force

Shuyun Wang et al.

Summary: An amplitude-limiting rotational piezoelectric energy harvester was presented to avoid damage to the piezoelectric vibrator due to excessive deformation during resonance. The study showed that reasonable parameter matching can effectively improve the energy generation capability and bandwidth of the energy harvester.

RENEWABLE ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Enhanced piezoelectric wind-induced vibration energy harvester via the interplay between cylindrical shell and diamond-shaped baffle

Junwu Kan et al.

Summary: This paper presents an enhanced piezoelectric wind-induced vibration energy harvester (EPWEH) that improves reliability, environmental adaptability, and power generation performance by introducing a downstream diamond-shaped baffle to change the aeroelastic instability of the cylindrical shell. Experimental results demonstrate that the compound-embedded structure significantly enhances the power generation performance of EPWEH, achieving a high voltage output enhancement and maximum output power density.

NANO ENERGY (2021)

Add to Collection

Article Thermodynamics

On the use of metasurface for Vortex-Induced vibration suppression or energy harvesting

Junlei Wang et al.

Summary: This paper investigates the use of metasurface patterns to modify the aerodynamic characteristics of bluff bodies for vortex-induced vibration (VIV) suppression or enhancement. Experimental validation and theoretical modeling are used to analyze the impact of metasurfaces on aerodynamic behaviors and vortex shedding processes. The study provides insights into the mechanisms behind the influence of metasurfaces on VIV systems, suggesting practical recommendations for using piezoelectric transducers with moderate coupling coefficients.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Thermodynamics

Development of a novel non-contact piezoelectric wind energy harvester excited by vortex-induced vibration

Shuyun Wang et al.

Summary: By utilizing a novel non-contact vortex-induced vibration-based piezoelectric wind energy harvester, the reliability and environmental adaptability have been enhanced. Through optimization of design and experimental validation, the maximum output power reached 1.438 mW and it can effectively operate within a wide wind speed range. With an increase in wind speed, enhancing transducer mass and decreasing shell mass can improve wind speed bandwidth, vibration displacement and output voltage.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Engineering, Civil

Experimental investigation on vortex-induced vibration and galloping of rectangular cylinders of varying side ratios with a downstream square plate

Azhar Mohamed et al.

Summary: Experiments were conducted on rectangular cylinders of varying side ratios in a fluid flow, demonstrating the significant impact of downstream square plates of different sizes and positions on the vibrations of the cylinder.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2021)

Add to Collection

Article Thermodynamics

A piezoelectric wind energy harvester excited indirectly by a coupler via magnetic-field coupling

Junwu Kan et al.

Summary: A piezoelectric wind energy harvester excited indirectly by a coupler via magnetic-field coupling is proposed in this paper, which can transform composite vibration energy into electric energy; The feasibility of the structure and principle of the harvester is proved through theoretical simulations and experiments, and it is found that the performance of the harvester can be adjusted by changing the structural parameters.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Mechanics

From active learning to deep reinforcement learning: Intelligent active flow control in suppressing vortex-induced vibration

Changdong Zheng et al.

Summary: This study explores an efficient flow control strategy to eliminate vortex-induced vibration using active learning and reinforcement learning frameworks. By employing adaptive control schemes and various algorithms, significant reduction in vibration amplitude and constraint to low-amplitude vibration status of the cylinder have been achieved.

PHYSICS OF FLUIDS (2021)

Add to Collection

Article Energy & Fuels

Performance enhancement of wind energy harvester utilizing wake flow induced by double upstream flat-plates

Feng-Rui Liu et al.

APPLIED ENERGY (2020)

Add to Collection

Article Thermodynamics

A novel self-tuning wind energy harvester with a slidable bluff body using vortex-induced vibration

Wan Sun et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Energy & Fuels

Bluff body with built-in piezoelectric cantilever for flow-induced energy harvesting

Min Zhang et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Add to Collection

Article Engineering, Ocean

Flow-induced vibration of a circular cylinder with splitter plates placed upstream and downstream individually and simultaneously

Hongjun Zhu et al.

APPLIED OCEAN RESEARCH (2020)

Add to Collection

Article Instruments & Instrumentation

Magnet-induced monostable nonlinearity for improving the VIV-galloping-coupled wind energy harvesting using combined cross-sectioned bluff body

Kai Yang et al.

SMART MATERIALS AND STRUCTURES (2020)

Add to Collection

Article Chemistry, Physical

Galloping triboelectric nanogenerator for energy harvesting under low wind speed

Lanbin Zhang et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

A high-efficient breeze energy harvester utilizing a full-packaged triboelectric nanogenerator based on flow-induced vibration

Qixuan Zeng et al.

NANO ENERGY (2020)

Add to Collection

Article Engineering, Aerospace

Enhancement of low-speed piezoelectric wind energy harvesting by bluff body shapes: Spindle-like and butterfly-like cross-sections

Junlei Wang et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Review Energy & Fuels

The state-of-the-art review on energy harvesting from flow-induced vibrations

Junlei Wang et al.

APPLIED ENERGY (2020)

Add to Collection

Article Physics, Applied

Vortex-induced swing (VIS) motion for energy harvesters and flowmeters

Ying Gong et al.

APPLIED PHYSICS LETTERS (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Coupled modeling and structural vibration control for floating offshore wind turbine

J. J. Yang et al.

RENEWABLE ENERGY (2020)

Add to Collection

Article Acoustics

Beat vibration mechanism of a sluice pier under high-speed flood discharge excitation

Huo-Kun Li et al.

JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL (2020)

Add to Collection

Article Thermodynamics

High-performance piezoelectric wind energy harvester with Y-shaped attachments

Junlei Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Automation & Control Systems

Numerical Investigation of the Influence of Bluff Body's Shape on Flow Characteristics in Vortex Flowmeters

V. E. Vershinin et al.

AUTOMATION AND REMOTE CONTROL (2019)

Add to Collection

Article Thermodynamics

Experimental investigation of aerodynamic energy harvester with different interference cylinder cross-sections

L. B. Zhang et al.

ENERGY (2019)

Add to Collection

Article Thermodynamics

Harvesting wind energy with bi-stable snap-through excited by vortex-induced vibration and galloping

Weiyang Qin et al.

ENERGY (2019)

Add to Collection

Article Physics, Applied

Enhancement of wind energy harvesting by interaction between vortex-induced vibration and galloping

Xuefeng He et al.

APPLIED PHYSICS LETTERS (2018)

Add to Collection

Article Mathematics, Applied

Nonlinear dynamic analysis of asymmetric tristable energy harvesters for enhanced energy harvesting

Shengxi Zhou et al.

COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION (2018)

Add to Collection

Article Engineering, Mechanical

Dual-Functional Electromagnetic Energy Harvesting and Vortex-Induced Vibration Control of an Elastically Mounted Circular Cylinder

Seyyed M. Hasheminejad et al.

JOURNAL OF ENGINEERING MECHANICS (2018)

Add to Collection

Article Engineering, Mechanical

Suppression of vortex-induced vibrations using flexible shrouding-An experimental study

Narendran Kumar et al.

JOURNAL OF FLUIDS AND STRUCTURES (2018)

Add to Collection

Article Acoustics

Vortex-induced vibrations of a circular cylinder with a pair of control rods of varying size

J. I. Jimenez-Gonzalez et al.

JOURNAL OF SOUND AND VIBRATION (2018)

Add to Collection

Article Engineering, Civil

Vortex-induced vibration and structure instability for a circular cylinder with flexible splitter plates

Shengping Liang et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2018)

Add to Collection

Article Engineering, Marine

Rigid cylinder with asymmetric roughness in Flow Induced Vibrations

Dahai Zhang et al.

OCEAN ENGINEERING (2018)

Add to Collection

Article Mechanics

Three-dimensional numerical investigation of vortex-induced vibration of a rotating circular cylinder in uniform flow

Adnan Munir et al.

PHYSICS OF FLUIDS (2018)

Add to Collection

Article Engineering, Mechanical

Dual-Functional Electromagnetic Energy Harvesting and Vortex-Induced Vibration Control of an Elastically Mounted Circular Cylinder

Seyyed M. Hasheminejad et al.

JOURNAL OF ENGINEERING MECHANICS (2018)

Add to Collection

Article Energy & Fuels

Energy harvesting from flow-induced vibration: a lumped parameter model

Junlei Wang et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2018)

Add to Collection

Article Thermodynamics

Vortex induced vibration response and energy harvesting of a marine riser attached by a free-to-rotate impeller

Hongjun Zhu et al.

ENERGY (2017)

Add to Collection

Article Engineering, Mechanical

2DOF CFD calibrated wake oscillator model to investigate vortex-induced vibrations

Andrey Postnikov et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2017)

Add to Collection

Article Engineering, Mechanical

Vortex-induced vibration suppression of a main circular cylinder with two rotating control rods in its near wake: Effect of the rotation direction

Hongjun Zhu et al.

JOURNAL OF FLUIDS AND STRUCTURES (2017)

Add to Collection

Article Engineering, Mechanical

Wake stabilization mechanism of low-drag suppression devices for vortex-induced vibration

Yun Zhi Law et al.

JOURNAL OF FLUIDS AND STRUCTURES (2017)

Add to Collection

Article Engineering, Mechanical

Flow-induced vibration of two side-by-side square cylinders with combined translational motions

M. Z. Guan et al.

JOURNAL OF FLUIDS AND STRUCTURES (2017)

Add to Collection

Article Acoustics

Design and experimental analysis of broadband energy harvesting from vortex-induced vibrations

L. B. Zhang et al.

JOURNAL OF SOUND AND VIBRATION (2017)

Add to Collection

Article Physics, Applied

Improving the performance of aeroelastic energy harvesters by an interference cylinder

L. B. Zhang et al.

APPLIED PHYSICS LETTERS (2017)

Add to Collection

Article Energy & Fuels

Mass ratio effect on vortex induced vibration of a flexibly mounted circular cylinder, an experimental study

Alireza Modir et al.

INTERNATIONAL JOURNAL OF MARINE ENERGY (2016)

Add to Collection

Article Mechanics

Flow-induced vibrations of a rotating cylinder

Remi Bourguet et al.

JOURNAL OF FLUID MECHANICS (2014)

Add to Collection

Article Engineering, Mechanical

Free vibrations of an elliptic cylinder at low Reynolds numbers

Navrose et al.

JOURNAL OF FLUIDS AND STRUCTURES (2014)

Add to Collection

Article Engineering, Mechanical

Piezoelectric energy harvesting from concurrent vortex-induced vibrations and base excitations

H. L. Dai et al.

NONLINEAR DYNAMICS (2014)

Add to Collection

Article Acoustics

Theoretical and experimental investigations of the dynamics of cantilevered flexible plates subjected to axial flow

Wensheng Zhao et al.

JOURNAL OF SOUND AND VIBRATION (2012)

Add to Collection

Article Mechanics

Numerical investigation on vortex-induced vibration of an elastically mounted circular cylinder at low Reynolds number using the fictitious domain method

Chunning Ji et al.

INTERNATIONAL JOURNAL OF COMPUTATIONAL FLUID DYNAMICS (2011)

Add to Collection

Article Engineering, Mechanical

Suppressing vortex-induced vibrations via passive means

H. Baek et al.

JOURNAL OF FLUIDS AND STRUCTURES (2009)

Add to Collection

Article Engineering, Mechanical

Flow-induced oscillation of two circular cylinders in tandem arrangement at low Re

T. K. Prasanth et al.

JOURNAL OF FLUIDS AND STRUCTURES (2009)

Add to Collection

Article Engineering, Mechanical

Experimental investigation of vortex-induced vibration of long marine risers

AD Trim et al.

JOURNAL OF FLUIDS AND STRUCTURES (2005)

Add to Collection

Article Mechanics

Experimental studies of passive control of vortex-induced vibration

P Bearman et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2004)

Add to Collection

Article Engineering, Civil

Vortex-induced cable vibration of cable-stayed bridges at high reduced wind velocity

M Matsumoto et al.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2001)

Add to Collection

Article Engineering, Mechanical

Response of a vortex flowmeter to impulsive vibrations

JJ Miau et al.

FLOW MEASUREMENT AND INSTRUMENTATION (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.