4.7 Article

A multi-criteria sustainability assessment and decision-making framework for DME synthesis via CO2 hydrogenation

Related references

Note: Only part of the references are listed.
Review Thermodynamics

Decision support methods for sustainable ship energy systems: A state-of-the-art review

Nikoletta L. Trivyza et al.

Summary: The shipping sector has faced significant pressure in the past decade to improve its environmental performance, especially with the target set by the International Maritime Organisation for a 50% reduction in greenhouse gas emissions by 2050. Interest in alternative fuels and sustainable ship energy systems has increased as a result. Further research is needed to adapt holistic approaches and consider safety, reliability, and social aspects of sustainability when evaluating ship energy systems.

ENERGY (2022)

Article Energy & Fuels

Exergetic Analysis of DME Synthesis from CO2 and Renewable Hydrogen

Marcello De Falco et al.

Summary: Carbon Capture and Utilization (CCU) is a viable solution for valorizing captured CO2 from industrial plants and synthesizing high-value products. However, using CO2 as a reactant in chemical processes poses challenges and requires thorough evaluation of efficiency and environmental impact.

ENERGIES (2022)

Article Thermodynamics

A study of trilemma energy balance, clean energy transitions, and economic expansion in the midst of environmental sustainability: New insights from three trilemma leadership

Irfan Khan et al.

Summary: This study investigates the impact of trilemma energy balance and clean energy transitions on economic expansion and environmental sustainability, while considering the role of clean energy and natural resource rents in the trilemma leaders. The findings suggest that trilemma energy balance, clean energy transitions, and natural resource depletion have a positive impact on economic growth, while clean energy discourages this growth. Additionally, trilemma energy balance, clean energy transitions, and clean energy improve environmental sustainability, while natural resource depletion deteriorates it.

ENERGY (2022)

Article Thermodynamics

Rethinking of conventional Gas-to-Liquid via dimethyl ether intermediate incorporating renewable energy against Power-to-Liquid

Wangyun Won et al.

Summary: This study aims to develop novel Gas-to-Liquid (GTL) processes for gasoline-equivalent products and compare them with other well-known GTL technological routes. The research overcame challenges in ensuring optimal feed for DME synthesis by exploring different combinations of methane reforming and syngas conditioning processes. The combined steam and CO2 reforming (CSCR) showed superior performance in DTG, with good economic and environmental benefits.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Thermodynamics

Comparative techno-economic assessment of bio-methanol and bio-DME production from oil palm residue

Karittha Im-orb et al.

Summary: A techno-economic assessment was conducted to compare the production of bio-methanol and bio-dimethyl ether (bio-DME) via gasification-MeOH and gasification-DME processes. The analysis found that gasification-MeOH produced a higher amount of valuable product (methanol) but released more CO2, while gasification-DME had a higher biomass conversion efficiency. In terms of economics, due to higher product prices, the gasification-DME process was approximately 7% more economically feasible.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Thermodynamics

Energy, exergy, exergoeconomic and exergoenvironmental analysis on a novel parallel double-effect absorption power cycle driven by the geothermal resource

Feng Zhang et al.

Summary: This paper proposes a novel parallel double-effect absorption power cycle using lithium bromide-water solution to make better use of geothermal energy. The comprehensive energy, exergy, exergoeconomic and exergoenvironmental models of this system are developed, and comparative studies on the performance of this system and traditional absorption power cycle are conducted. The results show that the proposed system can enhance net power output, exergy efficiency, and reduce cost, with slight increase in environmental impact. The absorber and low-temperature generator are identified as the components with highest exergy destruction and loss rate. Improving the performance of the proposed system can be achieved by adjusting certain operation conditions.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Green & Sustainable Science & Technology

A novel process design and techno-economic analysis for coal-based polygeneration process of synthetic natural gas, methanol and power

Zhaoli Liu et al.

Summary: With the development of China's economy and industry, coal to synthetic natural gas (CtSNG) has become a feasible alternative energy supply solution due to the growing demand for natural gas. However, existing CtSNG projects face several issues. This study proposes and analyzes two novel conceptual schemes to tackle these problems, and a comprehensive techno-economic analysis demonstrates the advantages of the proposed polygeneration processes.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Energy & Fuels

Coproduction of dimethyl-ether and hydrogen/power from natural gas with no carbon dioxide emissions

Ibubeleye Somiari et al.

Summary: The process integrates multiple key technologies to produce dimethyl-ether and hydrogen from natural gas in an energetically self-sufficient manner. Through thermodynamic analysis and operational cost analysis, suitable operational strategies and solutions are proposed.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2022)

Article Chemistry, Multidisciplinary

Exergoenvironmental analysis and thermoeconomic optimization of an industrial post-combustion CO2 capture and utilization installation

Reza Shirmohammadi et al.

Summary: This paper studies and optimizes the urea production in Iran's largest CO2 utilization plant. The location, magnitude, and source of inefficiencies in the plant are evaluated using various analysis methods. The optimization process uses decision variables and objective functions trained with a combination of an artificial neural network and a genetic algorithm. The results show the need for improvements in certain components of the plant, and highlight the environmental impact of the absorber column and stripper.

JOURNAL OF CO2 UTILIZATION (2022)

Article Thermodynamics

Exergoeconomic analysis and optimization of a solar energy-based integrated system with oxy-combustion for combined power cycle and carbon capturing

Khaled H. M. Al-Hamed et al.

Summary: This work presents a newly developed integrated system that produces multiple useful products, such as electricity, space cooling, freshwater, and ammonium bicarbonate. The system utilizes solar energy and natural gas as energy sources, and applies exergoeconomic analysis and optimization methods to enhance its thermodynamic and economic performance. The results show that the production cost of ammonium bicarbonate in this system is much lower than the market price, and the overall performance is good under optimum conditions.

ENERGY (2022)

Article Thermodynamics

A comparative study on hybrid power-to-liquids/power-to-gas processes coupled with different water electrolysis technologies

Ruxing Gao et al.

Summary: Recently, the Power-to-Liquids (PTL) and Power-to-Gas (PTG) processes have gained significant attention as carbon-neutral technologies, due to their ability to transform wasted CO2 into sustainable liquid fuels and synthetic natural gas while storing excess and intermittent renewable energy. Hydrogen production, achieved through various water electrolysis technologies, plays a key role in both PTL and PTG processes. This study systematically compares the effects of different water electrolysis technologies on the technical performance of PTL/PTG hybrid processes. The results show that the proposed processes are essential candidates for CO2 transformation, with the PTL/PTG hybrid process combined with solid oxide electrolysis (SOEC) being more competitive in terms of energy and exergy efficiencies, and the process combined with anion exchange membrane electrolysis (AEM) exhibiting higher carbon efficiency and net CO2 reduction rate.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Thermodynamics

Life cycle assessment and exergoenvironmental analyses for making a decision in the fuel selection for aero-engines: An application for a medium-size turboprop engine (m-TPE)

Ozgur Balli

Summary: This paper presents the exergoenvironmental analysis of a medium-size turboprop engine (m-TPE) fuelled by jet and biofuel, showing that biofuel utilization reduces environmental impact and specific environmental impact of the engine product. The study highlights the importance of alternative and clean fuel in making air transportation environmentally friendly.

ENERGY CONVERSION AND MANAGEMENT (2022)

Article Energy & Fuels

The direct synthesis of dimethyl ether (DME) from landfill gas: A techno-economic investigation

Loukia-Pantzechroula Merkouri et al.

Summary: This paper presents a techno-economic analysis of synthesizing dimethyl ether (DME) from landfill gas. The analysis shows that greenhouse gas utilization processes are currently feasible in terms of CO2 consumption and profitability.
Article Chemistry, Multidisciplinary

Computer-aided identification and evaluation of technologies for sustainable carbon capture and utilization using a superstructure approach

Wonsuk Chung et al.

Summary: Carbon capture and utilization technologies provide ways to reduce carbon emissions of fossil-fuel-based industries with lower economic penalties. However, the lack of consistent standards for data and methodologies, as well as varying levels of technical maturity and uncertainty, make the evaluation of CCU technologies for further R&D and commercialization complicated. The computer-aided tool called ArKaTAC(3) introduced in this work can help address these challenges and enable systematic and quantitative analyses by policymakers and practitioners.

JOURNAL OF CO2 UTILIZATION (2022)

Article Thermodynamics

Life cycle assessment of methanol production and conversion into various chemical intermediates and products

Stefan Cristian Galusnyak et al.

Summary: This study evaluates the production of methanol through direct CO2 hydrogenation and its conversion into various derivatives, and conducts an environmental assessment. The results suggest that alkali biodiesel and MTBE production are the most promising routes for MeOH conversion, and the process of methanol production and conversion into alkali biodiesel has the lowest environmental impact.

ENERGY (2022)

Article Thermodynamics

Addressing sustainability issues in transition to carbon-neutral sustainable society with multi-criteria analysis

Indre Siksnelyte-Butkiene et al.

Summary: This article presents a methodological framework for assessing energy poverty while considering the goals of low-carbon energy transition and sustainable development. Nordic countries stand out in terms of low-carbon energy transition progress due to their low poverty indicators, high standard of living, and high share of renewable energy.

ENERGY (2022)

Article Energy & Fuels

Multi-criteria screening of carbon dioxide utilization products combined with process optimization and evaluation

Xuepeng Cui et al.

Summary: This study proposes a multi-criteria screening framework for carbon dioxide utilization technologies combined with process optimization and evaluation. The results show that ethanol, methanol, and ethylene carbonate are the most promising carbon dioxide utilization products in chemical processes. This research provides practical guidelines for the future development of sustainable carbon dioxide utilization technologies.
Article Chemistry, Physical

Dimethyl ether (DME) synthesis from CO2 and H2 through ethanol-assisted methanol synthesis and methanol dehydration

Warangthat Kriprasertkul et al.

Summary: This study investigated the two steps of dimethyl ether (DME) synthesis from CO2 and H-2, including CO2 hydrogenation to methanol through ethanol-assisted method and methanol dehydration to DME. The addition of ZrO2, Al2O3, and ZrO(2)eAl(2)O(3) into Cu/ZnO catalyst was studied, and suitable zeolite for methanol dehydration was determined. The results showed that ethanol-assisted method and the Cu/ZnO/ZrO2 catalyst provided high methanol yield and CO2 conversion. Ferrierite zeolite exhibited the highest DME productivity. The synthesis of DME and ethylene from CO2 and H-2 through ethanol-assisted methanol synthesis and methanol dehydration has potential applications.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Article Chemistry, Physical

Inside the reaction mechanism of direct CO2 conversion to DME over zeolite-based hybrid catalysts

G. Bonura et al.

Summary: This study aims to shed light on the reaction mechanism of direct hydrogenation of CO2 into DME using hybrid catalysts. The results show that the synergy among active sites of different nature is crucial for overcoming the limitations of random mixing of preformed catalysts, and various catalyst features play a role in determining catalytic efficiency and selectivity patterns. Operating pressure and temperature are important factors for achieving high DME selectivity in the reaction process.

APPLIED CATALYSIS B-ENVIRONMENTAL (2021)

Article Thermodynamics

Combined energy consumption and CO2 capture management: Improved acid gas removal process integrated with CO2 liquefaction

Jianjun Chen et al.

Summary: This paper proposed an improved integrated Rectisol (Int-Rectisol) process with CO2 partial liquefaction to reduce energy consumption. The improved process reduced solvent circulation by 46.5%, decreased energy consumption by almost half, and significantly increased CO2 capture rate.

ENERGY (2021)

Article Thermodynamics

Exergetic, exergoeconomic, and exergoenvironmental aspects of an industrial-scale molasses-based ethanol production plant

Sama Amid et al.

Summary: An industrial-scale molasses-based bioethanol production system was analyzed using exergy, exergoeconomic, and exergoenvironmental analyses. The study determined the exergetic efficiency, environmental impact, and cost factors of the process, highlighting natural gas consumption as a key exergetic hotspot. Consideration of more sustainable alternatives and utilization of low-cost waste feedstocks are recommended to improve process viability.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Green & Sustainable Science & Technology

Macro-kinetic model for CuO-ZnO-ZrO2 @SAPO-11 core-shell catalyst in the direct synthesis of DME from CO/CO2

Ainara Ateka et al.

Summary: An original kinetic model was used to study the performance of a bifunctional catalyst in DME synthesis from CO/CO2 hydrogenation. The model considers different reactions occurring in different parts of the catalyst particle and predicts DME yields and CO2 conversion under various reaction conditions.

RENEWABLE ENERGY (2021)

Article Chemistry, Multidisciplinary

Multi criteria decision analysis for screening carbon dioxide conversion products

Kelvin A. Pacheco et al.

Summary: The production of chemicals and fuels from carbon dioxide can provide a sustainable low carbon pathway for the chemical industry, but faces challenges in cost and manufacturing impacts. Important factors such as thermodynamic data, market size, product price, and carbon dioxide utilization ratio should be considered when selecting promising chemical targets for further study.

JOURNAL OF CO2 UTILIZATION (2021)

Article Green & Sustainable Science & Technology

Development of dimethyl ether synthesis processes using by-product gas from a steel-making plant: Single-vs. two-step processes

Hyeon Park et al.

Summary: This study analyzed two different syngas-to-DME processes using experimental data and kinetic models, finding that the single-reactor configuration significantly improved CO conversion and DME production rate compared to the two-reactor method. Recycling unreacted gas could more than double the carbon efficiency for both reactor configurations.

JOURNAL OF CLEANER PRODUCTION (2021)

Review Green & Sustainable Science & Technology

Exergoenvironmental analysis of bioenergy systems: A comprehensive review

Mortaza Aghbashlo et al.

Summary: Bioenergy systems are expected to expand in the coming decades to address energy security and environmental challenges, but they must be environmentally superior to conventional counterparts. Life cycle assessment is a widely used methodology, while the integration of LCA with exergy offers a powerful tool for environmental sustainability assessment of bioenergy systems.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Thermodynamics

Exergoeconomic analysis and optimization of the Allam cycle with liquefied natural gas cold exergy utilization

Wen Chan et al.

Summary: The study investigates a novel combined power and cooling oxy-fuel power cycle, analyzing key components and factors affecting system performance. The optimization results demonstrate that exergy efficiency and total product unit cost cannot reach optimal values simultaneously. The introduction of adiabatic compression heat and different sets of cycle variables show significant impacts on system efficiency and cost.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Green & Sustainable Science & Technology

Multi-criteria sustainability assessment of potential methanol production processes

A. Crivellari et al.

Summary: This study aims to investigate the sustainability aspects of alternative processes for synthetic methanol synthesis by applying a systematic methodology based on multi-criteria performance indicators. The results demonstrate that process schemes using catalytic hydrogenation of carbon dioxide offer the best performance with a methanol capacity of 500 kg/h.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Thermodynamics

Techno-economic assessment and early-stage screening of CO2 direct hydrogenation catalysts for methanol production using knowledge-based surrogate modeling

Seolhee Cho et al.

Summary: A new knowledge-based assessment platform was developed for early-stage screening of CO2 direct hydrogenation catalysts, using surrogate models to simulate a new methanol production process. Evaluation criteria were applied to assess technical, economic, and environmental capabilities, and the platform was used to analyze 38 CO2 hydrogenation catalysts to establish R&D goals in catalyst discovery.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Green & Sustainable Science & Technology

Synergy between feedstock gate fee and power-to-gas: An energy and economic analysis of renewable methane production in a biogas plant

Robert Bedoic et al.

Summary: This study evaluates the integration of the power-to-gas concept into a food waste-based biogas plant to produce renewable methane. It was found that installing wind and photovoltaic equipment, along with importing additional electricity from the grid, is necessary for producing renewable methane in this integration. Economic analysis revealed that the feedstock gate fee significantly influences the economic viability of producing renewable methane.

RENEWABLE ENERGY (2021)

Article Green & Sustainable Science & Technology

Assessment of renewable energy resources using new interval rough number extension of the level based weight assessment and combinative distance-based assessment

Fatih Ecer et al.

Summary: This study evaluates five renewable energy sources in Turkey using the IRN CODAS method, with hydropower energy ranking first. The study selected criteria from four groups including socio-political, environmental, economic, and technical through literature review and interviews to ensure comprehensive assessment.

RENEWABLE ENERGY (2021)

Article Engineering, Chemical

Development of a green process for DME production based on the methane tri-reforming

M. Farsi et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Article Engineering, Chemical

Strategies for the Intensification of CO2 Valorization in the One-Step Dimethyl Ether Synthesis Process

Ainara Ateka et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Review Energy & Fuels

CO2Utilization Technologies in Europe: A Short Review

Remi Chauvy et al.

ENERGY TECHNOLOGY (2020)

Article Engineering, Chemical

Staging of di-methyl-ether (DME) synthesis reactor from synthesis gas (syngas): Direct versus indirect route

Ahmad Rafiee

CHEMICAL ENGINEERING RESEARCH & DESIGN (2020)

Article Energy & Fuels

Selecting emerging CO2 utilization products for short- to mid-term deployment

Remi Chauvy et al.

APPLIED ENERGY (2019)

Article Chemistry, Physical

Catalytic hydrogenation of CO2 from 600 MW supercritical coal power plant to produce methanol: A techno-economic analysis

Muhammad Asif et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)

Article Chemistry, Multidisciplinary

Feasibility study of methanol production plant from hydrogen and captured carbon dioxide

D. Bellotti et al.

JOURNAL OF CO2 UTILIZATION (2017)

Article Engineering, Environmental

Dimethyl ether production from CO2 rich feedstocks in a one-step process: Thermodynamic evaluation and reactor simulation

Marcello De Falco et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Green & Sustainable Science & Technology

Design and simulation of a methanol production plant from CO2 hydrogenation

Everton Simoes Van-Dal et al.

JOURNAL OF CLEANER PRODUCTION (2013)