Related references
Note: Only part of the references are listed.
Article
Materials Science, Multidisciplinary
Muhammad Bilal Ashraf et al.
Summary: This article investigates the MHD Jeffrey fluid flow over a stretching cylinder with convection. The Cattaneo-Christov heat flux model is used instead of the Fourier law of heat conduction to derive an energy equation. The mathematical model leads to a system of nonlinear PDEs in cylindrical coordinates, which are transformed into ordinary differential equations using similarity transformations. The numerical solutions are obtained using shooting and BVP4C methods, and the results are validated. The effects of different parameters on velocity, temperature, and concentration are analyzed through graphs, and the skin-friction coefficient, local Nusselt and Schmidt numbers are discussed and tabulated. The novelty of this work lies in the study of Cattaneo-Christov MHD heat flux for Jeffrey fluid flow with convective conditions.
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
(2023)
Article
Materials Science, Multidisciplinary
M. K. Sarangi et al.
Summary: The study investigates the flow and heat transfer characteristics of radiative and dissipative ternary composite nanomaterial over a stretched rotating disk, showing that the introduction of ternary composite nanofluid can effectively improve heat transfer performance and flow behavior.
MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS
(2023)
Article
Computer Science, Interdisciplinary Applications
Babar Iftikhar et al.
Summary: The present computational study analyzes the energy transport and entropy generation in the MHD mixed convective flow of non-Newtonian fluid. The study finds that the fluid velocity, energy transfer rate, and entropy generation increase with an increase in the bi-viscosity parameter (beta), while the velocity and temperature decrease with an increase in the Hartmann number (Ha), leading to an increase in entropy generation.
JOURNAL OF COMPUTATIONAL SCIENCE
(2023)
Article
Thermodynamics
A. Alsaedi et al.
Summary: This study investigates the magnetized convection flow of Reiner-Rivlin nanomaterial over a stretched sheet using the Cattaneo-Christov double diffusive analysis. The Cattaneo-Christov models are used to discuss more accurate concentration and temperature distributions with solutal and thermal relaxation times. The results reveal that a longer solutal relaxation time leads to a decrease in concentration.
Article
Engineering, Multidisciplinary
Ahmed Alsaedi et al.
Summary: This article addresses the issue of hydromagnetic mixed convective flow conveying tiny particles obeying the constitutive relations of Reiner-Rivlin. The flow by a stretching cylinder is modeled, and an applied magnetic field is considered. The formulation is based on the fluxes by the Cattaneo-Christov relation, while the thermal expression includes viscous dissipation and Ohmic heating. The study utilizes the Buongiorno model to explore the significance of nanoliquid and incorporates a physical illustration of entropy rate. The governing expressions are reduced to a non-dimensional system, and the solutions are developed using the optimal homotopy analysis approach (OHAM). Graphical descriptions of various influential variables are organized, showing enhanced velocity and entropy rate for curvature. The magnetic field has a reverse impact on flow and temperature, and the thermal relaxation time variable increases the thermal field. Decrease in concentration occurs through Schmidt number, while the Brinkman number augments the entropy rate. Opposite characteristics are observed for the entropy rate through magnetic and temperature difference variables, and a decrease in concentration is detected against the random motion variable. An increase in temperature occurs for the thermophoresis variable.
ALEXANDRIA ENGINEERING JOURNAL
(2023)
Article
Engineering, Multidisciplinary
Muhammad Yasir et al.
Summary: The Catteno-Christov heat flux plays a major role in the flow and heat transport of non-Newtonian fluids in various industrial and engineering applications. This study investigates the characteristics of homogeneous-heterogeneous reactions in the axisymmetric flow of Oldroyd-B materials using heat conduction analysis. The governing flow field equations are derived using the rheological formulation of the Oldroyd-B fluid model, and the series solutions for the velocity, thermal, and solutal distribution are obtained. The findings reveal the behavior of relevant parameters and their effects on the flow, temperature, and concentration distributions.
ALEXANDRIA ENGINEERING JOURNAL
(2023)
Article
Thermodynamics
Qitao Zhang et al.
Summary: This paper presents a novel numerical model for simulating non-Newtonian Bingham fluid flow in heavy oil reservoirs based on radiofrequency (RF) heating. The study reveals that RF heating has a positive impact on mitigating impediments and improving reservoir development, and it is important to consider the threshold pressure gradient (TPG) in determining the optimal well spacing.
Article
Physics, Multidisciplinary
Nur Syahirah Wahid et al.
Summary: Nanofluid, a novel heat transfer fluid, shows potential for enhancing heat transfer efficiency. This study numerically investigates the flow and heat transfer of a mixed convective hybrid nanofluid along a vertical plate. The findings reveal the existence of dual solutions and suggest minimizing the nanofluid concentration and maximizing thermal radiation for better heat transfer performance.
CHINESE JOURNAL OF PHYSICS
(2022)
Article
Physics, Multidisciplinary
P. M. Patil et al.
Summary: This paper investigates the characteristics of nanoliquid flow with magnetohydrodynamic triple diffusive and mixed convective effects. Through mathematical analysis, many physical parameters that can be used as process design parameters are identified, and the fluid flow results related to these parameters are obtained.
CHINESE JOURNAL OF PHYSICS
(2022)
Article
Physics, Multidisciplinary
M. Nasir et al.
CHINESE JOURNAL OF PHYSICS
(2022)
Article
Thermodynamics
Wasim Jamshed et al.
Summary: This study investigates heat transmission and stable mixed convective flow in a ventilated porous enclosed space with a heated elliptic inner cylinder filled with MWCNT/CMC nanofluid. The numerical findings show that the average Nusselt number increases with higher Richardson number and porosity ratio.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Thermodynamics
R. Hemalatha et al.
Summary: The current article discusses the mixed convective flow of Graphene oxide and Clay nanoparticles suspended in a nanofluid in a non-Darcy porous medium, taking into account the shape of the nanoparticles. The findings indicate that spherical nanoparticles exhibit an enhanced temperature distribution and have a higher settling rate in the base fluid.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Thermodynamics
Muhammad Bilal Hafeez et al.
Summary: The use of hybrid nanoparticles to improve thermal processes has implications for various interventions in different sectors. This paper investigates the impacts of ternary nanoparticles on the thermal characteristics of hyperbolic tangent materials. It explores flow describing equations under heat production, non-Fourier heat flux, and an induced magnetic field. Boundary layer analysis and finite element techniques are employed to model and solve the complex generated partial differential equations.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Thermodynamics
T. S. Neethu et al.
Summary: This study investigates the dynamics of bioconvective MHD hybrid nanofluid flow over an exponentially stretching permeable surface, considering thermal radiation, heat generation, chemical reaction, porosity, and dissipative effects. The results show that an increase in the porosity parameter leads to an increase in temperature and a decrease in velocity. The temperature profile is proportional to the radiation parameter, magnetic field parameter, Eckert number, and volume fraction of TiO2 and Ag nanoparticles. The mass transfer rate and motile density number increase with higher values of the chemical reaction parameter.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Thermodynamics
Tanveer Sajid et al.
Summary: This study aims to analyze the behavior of rotating Prandtl nanofluid on a stretchable surface, considering the effects of MHD, variable species diffusivity, nonlinear warm radiation, convective limit conditions, velocity slip, and chemical reaction. The Buongiorno model is used to capture the impacts of Brownian movement and thermophoresis caused by nanofluids. The governing differential equations are transformed into ordinary differential equations and solved numerically using the shooting technique. The results show enhanced temperature profile due to increased temperature convection boundary, and improved mass fraction field with better species diffusivity.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Thermodynamics
Ebrahem A. Algehyne et al.
Summary: This investigation explores the enhancement of thermal characteristics in a hybrid nanoliquid, which has important applications in industries such as coolant for electrical devices and heat exchangers. The study considers the three-dimensional magnetohydrodynamic flow of partially ionized hybrid nanofluids over a stretching sheet. The results show that increasing Hall current and ion-slip number enhance the primary velocities of the hybrid nanofluids, while higher Hartmann number decreases the velocities. On the other hand, larger Hall current and stretching parameter increase the velocities, while increasing ion-slip number and Hartmann number have the opposite effects. The temperature profiles of the hybrid nanofluids weaken for thermal relaxation time parameter and increase for higher thermal Biot number. The water-based hybrid nanofluid is more influenced by the embedded parameters compared to the kerosene oil-based hybrid nanofluid.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Amal R. Al Hajri et al.
International Journal of Thermofluids
(2022)
Article
Thermodynamics
Amjad Ali Pasha et al.
Summary: This study investigates the flow and heat transfer properties of a hybrid nanofluid on a slippery surface. The results show that the hybrid nanofluid has better heat transfer performance compared to regular nanofluids. Factors such as the shape and volume fraction of nanoparticles significantly affect the flow velocity, temperature, and entropy.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Thermodynamics
Hassan Waqas et al.
Summary: Nanofluids have been widely studied due to their various manufacturing, technical, and medical purposes. This investigation examines the use of Casson nanofluid in a permeable solar collector flow and evaluates the outcomes of copper oxide-water, titanium dioxide-water, and disulfide molybdenum-water nanofluids. It is found that copper oxide-water nanofluid exhibits better heat transport capability compared to titanium dioxide-water nanofluid. The study also analyzes the effects of various parameters on the velocity, temperature, and entropy profiles of the fluids.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2022)
Article
Thermodynamics
Sai Ravi Gupta Polasanapalli et al.
Summary: In this study, a characteristic-based off-lattice Boltzmann method was used to investigate mixed convection heat transfer. The effects of rotation strength and direction on flow and heat transfer were analyzed. The results showed that forced convection always resulted in lower heat transfer rates, while natural convection could lead to higher heat transfer rates in certain cases. Different configurations of the cylinders resulted in different heat transfer rates.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES
(2022)
Article
Thermodynamics
Tasawar Hayat et al.
Summary: This study investigates the characteristics of nonlinear partial slip in the flow of Carreau fluid through porous space. The flow in porous space is characterized by modified Darcy's law, and variable characteristics in modeling are taken into account. The study also models entropy generation rate and analyzes heat transfer with viscous dissipation, presenting relevant equations using boundary layer theory. The resulting problems are nonlinear not only in terms of equations but also through boundary conditions.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2021)
Article
Thermodynamics
M. Farooq et al.
Summary: Low thermal conductivity is a major issue in heat transfer problems, but can be increased by saturating nanoparticles into base liquid. These nanoparticles have wide applications in engineering, electronics, and biomedicine, and are particularly effective for cancer treatment. Nanofluids are extensively used as coolants in various industries, and their flow behavior in MHD fluids with nanoparticles is studied in this attempt.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2021)
Article
Thermodynamics
Abdul Hafeez et al.
Summary: The article introduces the Cattaneo-Christov heat and mass flux theories in the flow of Oldroyd-B fluid over a rotating disk, using it to solve heat and mass equations. Analytical solutions for velocity, temperature, and concentration distributions are obtained, showing that the temperature of the Odroyd-B fluid increases with the magnetic field parameter within a specific range. Additionally, velocities decrease with the magnetic field parameter, and temperature decreases as the thermal relaxation time parameter increases, while the solutal relaxation time parameter influences concentration distribution in a decreasing trend.
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
(2021)
Article
Engineering, Multidisciplinary
Umair Khan et al.
Summary: The research explores mixed convective stagnation point flow of a hybrid nanofluid over a yawed cylinder with radiation impact, revealing significant results related to yaw angle, hybrid nanoparticle volume fraction, mixed convection, radiation, and non-similarity phenomena. The impact of the yaw angle on the velocity and temperature profiles of the hybrid nanofluid in different flow directions is discussed, along with the effects of hybrid nanoparticles on velocity and temperature in both assisting and opposing flow scenarios.
ALEXANDRIA ENGINEERING JOURNAL
(2021)
Article
Thermodynamics
Rasool Maroofiazar et al.
Summary: This study experimentally investigated energy harvesting from sloshing of Newtonian and non-Newtonian fluids, comparing the performance of different input parameters and developing an empirical-mathematical model for harvested voltages and electrical power. The results showed that the strength of permanent magnets and the frequency of excitations had a significant influence on the output parameters, and harvested electrical power was higher for Newtonian fluid compared to dilatant and pseudoplastic liquids.
Article
Engineering, Multidisciplinary
S. Bilal et al.
Alexandria Engineering Journal
(2021)
Article
Engineering, Multidisciplinary
M. Ijaz Khan et al.
ALEXANDRIA ENGINEERING JOURNAL
(2020)
Article
Computer Science, Interdisciplinary Applications
F. Shah et al.
COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE
(2020)
Article
Materials Science, Multidisciplinary
A. Sohail et al.
RESULTS IN PHYSICS
(2017)
Article
Chemistry, Physical
M. Waqas et al.
JOURNAL OF MOLECULAR LIQUIDS
(2016)
Article
Engineering, Multidisciplinary
Samuel O. Adesanya et al.
ALEXANDRIA ENGINEERING JOURNAL
(2015)
Article
Mathematics, Applied
Shijun Liao
COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION
(2010)
Article
Mathematics, Applied
Shi-Jun Liao
COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION
(2009)
Article
Mechanics
C. I. Christov
MECHANICS RESEARCH COMMUNICATIONS
(2009)
Article
Thermodynamics
S. Mukhopadhyay et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2008)
Article
Thermodynamics
MA Seddeek
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
(2002)
