☆ 4.6 Article

Porous NiS2 nanosheets anchored on reduced graphene oxide as high-rate and long-life anode materials for sodium-ion batteries

ELECTROCHIMICA ACTA (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Graphene supported FeS2 nanoparticles with sandwich structure as a promising anode for High-Rate Potassium-Ion batteries

Xinyu Zhou et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Chemistry, Physical

Cobalt-nickel bimetallic sulfide (NiS2/CoS2) based dual-carbon framework for super sodium ion storage

Qixiang Deng et al.

Summary: Designing hybrid metal sulfide-based anode materials is an effective method to enhance the performance of sodium-ion batteries (SIBs). However, the capacity of sulfide-based anodes decreases significantly due to volume expansion during charge/discharge processes. In this study, concaved NiS2@CoS2 nano-cubes (NCSC) were successfully prepared through chemical etching of Ni-Co coordination polymers (NiCoCP) precursor. The obtained NCSC anode materials exhibited a high specific sodium storage capacity of 848 mAh g-1 at 0.1 A g-1 and a stable cyclability of 572 mAh g-1 at 5 A g-1 after 830 cycles. This unique etching strategy provides a novel approach for the design and fabrication of high-performance anode materials for SIBs.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Energy & Fuels

Ultrasmall NiS2 Nanocrystals Embedded in Ordered Macroporous Graphenic Carbon Matrix for Efficiently Pseudocapacitive Sodium Storage

Zhaozhao Liu et al.

Summary: Sodium-ion hybrid capacitor (SIHC) is a promising alternative for large-scale energy storage, but the imbalance between slow Na+ reaction kinetics and rapid ion adsorption/desorption is a challenge. This study proposes a high-rate-performance NiS2@OMGC anode material with NiS2 nanocrystals embedded in N, S-co-doped graphenic carbon. The material exhibits excellent rate performance and a SIHC device fabricated with it achieves ultrahigh energy and power densities, as well as a long lifespan. This research demonstrates the rational design of electrode materials for energy storage applications.

TRANSACTIONS OF TIANJIN UNIVERSITY (2023)

Add to Collection

Article Chemistry, Physical

Constructing NiS2/NiSe2 heteroboxes with phase boundaries for Sodium-Ion batteries

Yu Xiang et al.

Summary: The NiS2/NiSe2 heteroboxes as anodes for SIBs exhibit advantages of exposing more active sites at phase boundaries, accelerating sodium storage kinetics, and maintaining ultralong reversible capacity and good rate capability. This rational construction of phase boundary with unique structure provides guidance for the development of advanced SIBs anode materials.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Regulating the Interlayer Spacings of Hard Carbon Nanofibers Enables Enhanced Pore Filling Sodium Storage

Congcong Cai et al.

Summary: The research involves designing hard carbon nanofibers with tunable interlayer spacings, which exhibit good sodium storage performance. The study also reveals the reasons for plateau-capacity degradation and provides insights for constructing high-performance hard carbon anode materials.

SMALL (2022)

Add to Collection

Article Engineering, Environmental

Metal organic frameworks derived CoS2/NiS2 heterostructure toward high-performance sodium storage anode materials

Jiajia Wang et al.

Summary: The synergistic effect of different components in the anode material composed of transition metal dichalcogenides with heterostructure leads to high reversible capacity and superior rate performance in sodium ion batteries. In this study, a CoS2/NiS2 heterostructure anode was fabricated by a co-precipitation process and hydrothermal sulfidation. The anode exhibited a high capacity and cyclic stability, with good reaction kinetics. The results provide insights for the design of other anode materials with heterostructures for sodium ion batteries.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Construction of hierarchical NiS@C/rGO heterostructures for enhanced sodium storage

Zhiyang Song et al.

Summary: Transition metal sulfides are promising anode materials for sodium ion batteries (SIBs), but their low conductivity and large volume effects hinder their practical applications. In this study, a multilevel-carbon supported NiS anode material with a complex hierarchical hollow structure was successfully synthesized via nanostructure engineering and carbon hybridization, showing excellent sodium storage performance.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Chemistry, Physical

NiS2 nanodots on N,S-doped graphene synthesized via interlayer confinement for enhanced lithium-/sodium-ion storage

Xiaofen Dong et al.

Summary: Rational design of high-capacity nanosized composites is crucial for enhancing electrochemical performances of lithium- and sodium-ion batteries. In this study, ultrasmall NiS2 nanodots on reduced graphene oxide were synthesized via interlayer confinement, leading to improved electrochemical performances for both LIBs and SIBs.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Hierarchical Engineering for High-Energy-Oriented Sodium-Ion Batteries

Pei Liu et al.

Summary: Tailored electrode materials with robust architectures and expedited Na+ diffusion kinetics are crucial for practical applications of sodium-ion batteries (SIBs). Hierarchical engineering, as a synthetic strategy, shows general applicability and can improve the electrochemical performance of electrode materials. However, challenges exist in achieving large-scale preparation and applications due to the requirements for controlled synthesis conditions.

ACCOUNTS OF MATERIALS RESEARCH (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Ether-based electrolytes for sodium ion batteries

Ying Li et al.

Summary: This review provides a comprehensive overview of the development and characteristics of ether-based electrolytes (EBEs) in sodium-ion batteries (SIBs). Compared to conventional carbonate-based electrolytes, EBEs exhibit improved cycling stability and fast charge-discharge performance, but their unique chemistry is still under investigation.

CHEMICAL SOCIETY REVIEWS (2022)

Add to Collection

Article Chemistry, Physical

A novel synthetic strategy towards NaCl-type NixCo1-xO solid solution nanoplatelets encapsulated in N-doped carbon for enhanced lithium-ion storage

Menghui Zhang et al.

Summary: A novel synthetic route was developed to prepare Ni-Co oxide solid solution encapsulated in N-doped carbon with well-defined morphology and homogeneity. The resulting material exhibited excellent lithium-storage performance with high specific capacity, great rate capability, and excellent long-term cyclability. These promising results were attributed to the synergistic effect of different cations, the 2D nanoplatelet structure, the robust conductive carbon coating, and a high pseudocapacitive contribution.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Electrochemistry

NiS2 wrapped into graphene with strong Ni-O interaction for advanced sodium and potassium ion batteries

Wei Li et al.

Summary: Sodium/potassium ion batteries have attracted attention for their low cost and energy density similar to lithium-ion batteries. Graphene-supported NiS2 nanocrystals with a strong Ni-O interaction were used as universal anode materials, showing high cycle stability and reversible capacity in both SIB and PIB. The study sheds light on manipulating nickel-sulfide/rGO based materials through interfacial engineering for high-performance energy storage devices.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis of NiS2/reduced graphene oxide nanocomposites as anodes materials for high-performance Sodium and Potassium ion batteries

Hao Zheng et al.

Summary: The NiS2/reduced graphene oxide nanocomposite exhibits excellent sodium and potassium storage properties with high initial discharge capacity and reversible capacity. The structure improves electrode conductivity through synergistic effects and effectively buffers volume changes.

MATERIALS RESEARCH BULLETIN (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Bimetallic Sulfide SnS2/FeS2 Nanosheets as High-Performance Anode Materials for Sodium-Ion Batteries

Yun Chen et al.

Summary: The SnS2/FeS2/rGO composite material shows superior electrochemical performance in sodium-ion batteries, with high cycle stability and rate performance.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Vertical growth of nickel sulfide nanosheets on graphene oxide for advanced sodium-ion storage

Yuanyi Luo et al.

Summary: A two-dimensional vertical aligned nickel sulfide nanosheets grown on reduced graphene oxide (rGO) is designed in this study, which enhances the electrolyte/electrode contact and improves rate-performance and cycling stability. The NiS@rGO composite shows good capacity retention and cycling stability in tests, indicating its potential for sodium-ion battery applications.

CARBON (2021)

Add to Collection

Article Electrochemistry

SnS nanoparticles anchored on nitrogen-doped carbon sheets derived from metal-organic-framework precursors as anodes with enhanced electrochemical sodium ions storage

Shuyi Feng et al.

Summary: A SnS/NCS hybrid was successfully fabricated using a simple template approach, which showed excellent electrochemical performance and rate capability for sodium storage. This nanostructured material has great potential for practical applications in the field of energy storage.

ELECTROCHIMICA ACTA (2021)

Add to Collection

Article Chemistry, Physical

Reduced graphene oxide decorated amorphous NiS2 nanosheets as high-performance anode materials for enhanced sodium-ion hybrid capacitors

Ying-Ge Xu et al.

Summary: The NiS2/rGO composite is a promising anode with good cycling stability and specific capacity, which can promote the commercialization process of SICs.

IONICS (2021)

Add to Collection

Article Engineering, Environmental

Fast chemical exfoliation of graphite to few-layer graphene with high quality and large size via a two-step microwave-assisted process

Wenyu Wu et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Chemistry, Physical

Growing NiS2 nanosheets on porous carbon microtubes for hybrid sodium-ion capacitors

Jing Zhao et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Pseudocapacitance: From Fundamental Understanding to High Power Energy Storage Materials

Simon Fleischmann et al.

CHEMICAL REVIEWS (2020)

Add to Collection

Article Chemistry, Physical

Two-dimensional carbon-coated CoS2 nanoplatelets issued from a novel Co(OH)(OCH3) precursor as anode materials for lithium ion batteries

Menghui Zhang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Controllable synthesis of NiS and NiS2 nanoplates by chemical vapor deposition

Chen Dai et al.

NANO RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

One-pot synthesis of small-sized Ni3S2 nanoparticles deposited on graphene oxide as composite anode materials for high-performance lithium-/sodium-ion batteries

Ya-hui Zhang et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Revealing the Critical Factor in Metal Sulfide Anode Performance in Sodium-Ion Batteries: An Investigation of Polysulfide Shuttling Issues

Mingxiang Hu et al.

SMALL METHODS (2020)

Add to Collection

Article Chemistry, Physical

Engineering yolk-shell P-doped NiS2/C spheres via a MOF-template for high-performance sodium-ion batteries

Liqin Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Experimental design and theoretical calculation for sulfur-doped carbon nanofibers as a high performance sodium-ion battery anode

Qianzheng Jin et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

Uncovering the Cu-driven electrochemical mechanism of transition metal chalcogenides based electrodes

Qidong Li et al.

ENERGY STORAGE MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Design of pomegranate-like clusters with NiS2 nanoparticles anchored on nitrogen-doped porous carbon for improved sodium ion storage performance

Jiabao Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Metal-Organic Frameworks derived novel hierarchical durian-like nickel sulfide (NiS2) as an anode material for high-performance sodium-ion batteries

K. J. Zhu et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Cobalt-based layered metal compound nanoplatelets for lithium-ion batteries

Peng Ma et al.

MATERIALS LETTERS (2017)

Add to Collection

Article Chemistry, Physical

New class of two-dimensional bimetallic nanoplatelets for high energy density and electrochemically stable hybrid supercapacitors

Zhiting Liu et al.

NANO RESEARCH (2017)

Add to Collection

Article Electrochemistry

CuS Microspheres as High-Performance Anode Material for Na-ion Batteries

He Li et al.

ELECTROCHIMICA ACTA (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Nickel Disulfide-Graphene Nanosheets Composites with Improved Electrochemical Performance for Sodium Ion Battery

Tianshi Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Chemistry, Physical

Synthesis of platinum/graphene composites by a polyol method: The role of graphite oxide precursor surface chemistry

Zhiting Liu et al.

CARBON (2015)

Add to Collection

Article Chemistry, Physical

Tuning the composition of metastable COxNiyMg100-x-y(OH)(OCH3) nanoplates for optimizing robust methane dry reforming catalyst

Xiaoli Fan et al.

JOURNAL OF CATALYSIS (2015)

Add to Collection

Article Engineering, Chemical

Controlling and Formation Mechanism of Oxygen-Containing Groups on Graphite Oxide

Zhiting Liu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Add to Collection

Article Electrochemistry

In Situ Electrochemical Generation of Mesostructured Cu2S/C Composite for Enhanced Lithium Storage: Mechanism and Material Properties

Fei Han et al.

CHEMELECTROCHEM (2014)

Add to Collection

Article Chemistry, Physical

High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance

Veronica Augustyn et al.

NATURE MATERIALS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation of graphene by a low-temperature thermal reduction at atmosphere pressure

Wufeng Chen et al.

NANOSCALE (2010)

Add to Collection

Article Chemistry, Multidisciplinary

Preparation and surface activity of single-crystalline NiO(111) nanosheets with hexagonal holes: A semiconductor nanospanner

Juncheng Hu et al.

ADVANCED MATERIALS (2008)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient preparation and catalytic activity of MgO(111) nanosheets

Kake Zhu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2006)

Add to Collection

© Peeref 2019-2024. All rights reserved.