☆ 4.6 Article

Composite anion exchange membranes based on polysulfone and silica nanoscale ionic materials for water electrolyzers

ELECTROCHIMICA ACTA (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Optimal operating conditions evaluation of an anion-exchange-membrane electrolyzer based on FUMASEP? FAA3-50 membrane

Irene Gatto et al.

Summary: Water electrolysis for hydrogen production is an environmentally friendly method, especially when powered by renewable energy sources. The use of anion-exchange membranes (AEMs) in electrolyzer technology has attracted growing interest. In this study, a FAA3-5 0 anion-exchange membrane is tested as the electrolyte/separator in a 5 cm2 electrolysis cell, with IrO2 and Pt/C catalysts at the anode and cathode, respectively. The effects of cell temperature, membrane-electrode assembly (MEA) procedure, and electrolyte choice on performance are analyzed, with the catalyst-coated membrane approach and diluted KOH solution showing potential for improved operation.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

Add to Collection

Article Chemistry, Physical

NiFe2O4 hierarchical nanoparticles as electrocatalyst for anion exchange membrane water electrolysis

A. Martinez-Lazaro et al.

Summary: A NiFe2O4 catalyst with nanoparticle morphology, obtained by hydrothermal treatment using glucose and urea as precursors, is investigated as an anode catalyst in an anion exchange membrane electrolyser. The catalyst shows higher current density and stability compared to benchmark catalyst IrO2.

JOURNAL OF POWER SOURCES (2023)

Add to Collection

Article Chemistry, Physical

Synthesis, characterization and water electrolyzer cell tests of poly (biphenyl piperidinium) Anion exchange membranes

Tommaso Caielli et al.

Summary: Water electrolyzers based on anion exchange membranes (AEMs) with poly(aryl piperidiniums) (PAPs) show promise for reducing the capital costs of green hydrogen production. Through optimized polymerization parameters, mechanically resistant PAP-based membranes with a thickness of 15 μm were obtained, exhibiting an impressive conductivity of 185 mS cm-1 and excellent stability in 1 M KOH solution at 80°C. These membranes outperformed a commercially available PAP-based membrane in an electrolyzer cell, demonstrating their potential as low-cost AEMs with easy synthesis.

JOURNAL OF POWER SOURCES (2023)

Add to Collection

Article Electrochemistry

Anion Exchange Membrane Water Electrolysis Based on Nickel Ferrite Catalysts

Angela Capri et al.

Summary: A nickel ferrite catalyst was prepared and successfully deposited on an anion exchange membrane. The catalyst demonstrated higher current density than commercial catalysts and showed good stability during a 120-hour test.

CHEMELECTROCHEM (2023)

Add to Collection

Article Biochemistry & Molecular Biology

On the Operational Conditions' Effect on the Performance of an Anion Exchange Membrane Water Electrolyzer: Electrochemical Impedance Spectroscopy Study

Irina V. Pushkareva et al.

Summary: The performance of an anion exchange membrane water electrolyzer was studied under different operational conditions using conventional time-domain techniques and electrochemical impedance spectroscopy (EIS). The study provided valuable data on the faradaic and non-faradaic processes in the membrane electrode assembly (MEA) and discussed their contribution to the total polarization resistance. The distribution of the AEMWE cell voltage contributions is important for accessing the key directions in improving system performance.

MEMBRANES (2023)

Add to Collection

Article Electrochemistry

A standard electrolyzer test cell design for evaluating catalysts and cell components for anion exchange membrane water electrolysis

Abdulhai H. Faqeeh et al.

Summary: This study designed a standard water electrolyzer test cell for evaluating the performance of novel electrocatalysts in anion exchange membrane water electrolysis. After optimization, the cell was found to deliver current densities of 1.40 A cm-2 and 2.74 A cm-2 at cell voltages of 2.0 V and at 60 degrees C, respectively. Guidance for assembling and operating the water electrolyzer, along with design drawings, is provided.

ELECTROCHIMICA ACTA (2023)

Add to Collection

Article Chemistry, Physical

Ruthenium-loaded titania nanotube arrays as catalysts for the hydrogen evolution reaction in alkaline membrane electrolysis

Laura Capozzoli et al.

Summary: In this study, a new electrocatalyst featuring ruthenium as the active phase and titania nanotube arrays as a dual-scale porosity support was introduced for alkaline membrane water electrolysis. The synthesis method and material characterization of the catalyst were reported. The catalyst's functionality was evaluated through cyclic voltammetry and linear sweep voltammetry, and the results showed that the novel electrode structure with ultralow PGM loading exhibited outstanding potential for application in alkaline membrane electrolyzers.

JOURNAL OF POWER SOURCES (2023)

Add to Collection

Article Electrochemistry

Effect of LDH platelets on the transport properties and carbonation of anion exchange membranes

Cataldo Simari et al.

Summary: In this study, nanocomposite Anion Exchange Membranes (AEMs) based on tetramethylammonium Polysulfone ionomer and Layered Double Hydroxide (LDH) were extensively investigated. The effect of LDH filler on the performance of the membranes and the carbonation kinetics were studied. The results revealed that the presence of LDH filler improved the ionic conductivity and mechanical properties of the membranes, while reducing the rate of alkaline degradation.

ELECTROCHIMICA ACTA (2022)

Add to Collection

Article Thermodynamics

End-to-end value chain analysis of isolated renewable energy using hydrogen and ammonia energy carrier

Jinwoo Kim et al.

Summary: This study analyzed the long-distance end-to-end value chain of ammonia as an energy carrier and found that the overall energy efficiency can be improved by optimizing sub-processes. Adjusting the synthesis conditions and transport ship type of ammonia can lead to an improvement of up to 20.2%.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Chemistry, Physical

High-performance and durable water electrolysis using a highly conductive and stable anion-exchange membrane

Sun Young Kang et al.

Summary: The commercialization of anion-exchange membrane water electrolysis (AEMWE) is crucial for producing low-cost and high-purity hydrogen. In this study, a high-performance and stable AEMWE was developed by using an anion-exchange membrane without an aryl-ether backbone structure. The adapted AEM exhibited improved performance and better durability compared to the conventional AEM.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Green hydrogen standard in China: Standard and evaluation of low-carbon hydrogen, clean hydrogen, and renewable hydrogen

Wei Liu et al.

Summary: Building a low-carbon and clean hydrogen supply system has become a global consensus with the proposal of carbon neutral goals in various countries, the deepening of global action on climate change, and the acceleration of green economy recovery in the post epidemic era. The standards for green hydrogen have been discussed globally, and China has issued the first formal green hydrogen standard, providing calculation methods for greenhouse gas emissions of different hydrogen production paths.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

Add to Collection

Article Polymer Science

Two new anion exchange membranes based on poly(bis-arylimidazolium) ionenes blend polybenzimidazole

Na Yu et al.

Summary: The development of polymer membranes with excellent alkaline stability and high hydroxide conductivity is a huge challenge to fuel cells. The study successfully adjusted the physicochemical properties of the blend membranes through synthesis of two polymer membranes, demonstrating the technical feasibility of anion exchange membrane fuel cells.

POLYMER (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Anion-Exchange Membrane Water Electrolyzers

Naiying Du et al.

Summary: This article summarizes the latest advances in the field of water electrolyzers regarding catalysts, membranes, and membrane electrode assemblies, focusing on the research focus of AEPs, improvement methods for AEMs, and current challenges including OER and HER. Despite rapid advancements in the field, stability remains a major issue that needs to be addressed.

CHEMICAL REVIEWS (2022)

Add to Collection

Article Chemistry, Physical

Evaluating the effect of membrane-ionomer combinations and supporting electrolytes on the performance of cobalt nanoparticle anodes in anion exchange membrane electrolyzers

Shraboni Ghoshal et al.

Summary: This study investigates the influence of component choices and MEA fabrication in low temperature polymer electrolyte membrane electrolyzers. Changes in ionomer type, membrane, and supporting electrolyte were found to affect catalyst redox, resulting in variations in exchange current densities and Tafel slopes. Additionally, differences in membrane conductivity were identified as a key factor in performance variability among different MEAs, with higher conductivity minimizing ohmic losses.

JOURNAL OF POWER SOURCES (2021)

Add to Collection

Article Polymer Science

Polysulfone grafted with anthraquinone-hydroanthraquinone redox as a flexible membrane electrode for aqueous batteries

Xiaojiao Li et al.

Summary: This study designed a polysulfone grafted anthraquinone-hydroanthraquinone membrane, which was confirmed through characterization and battery performance tests to have potential applications in zinc ion batteries, with advantages in improving electrochemical performance.

POLYMER (2021)

Add to Collection

Article Biotechnology & Applied Microbiology

Green hydrogen as an alternative fuel for the shipping industry

Selma Atilhan et al.

Summary: This paper critically assesses the potential usage of green hydrogen in the shipping industry, evaluating production routes, techno-economic performance, storage, and safety, and benchmarking compared to existing production routes specific to shipping industry applications. Important metrics for liquid hydrogen are analyzed to evaluate production cost and GHG emissions for various routes, and a comparison is made for the safety and health issues of hydrogen compared to conventional and emerging maritime shipping fuels.

CURRENT OPINION IN CHEMICAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Comparative study of anion exchange membranes for low-cost water electrolysis

I. Pushkareva et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Engineering, Chemical

Preparation of anion exchange membrane by efficient functionalization of polysulfone for electrodialysis

Ying Liu et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

High-performance alkaline water electrolysis using Aemion™ anion exchange membranes

Patrick Fortin et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Polymer Science

Development of Polymeric Membranes Based on Quaternized Polysulfones for AMFC Applications

Alessandra Carbone et al.

POLYMERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Titanium Dioxide Grafted on Graphene Oxide: Hybrid Nanofiller for Effective and Low-Cost Proton Exchange Membranes

Cataldo Simari et al.

NANOMATERIALS (2020)

Add to Collection

Article Chemistry, Physical

Effect of anion exchange ionomer content on electrode performance in AEM water electrolysis

Alaa Y. Faid et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

Add to Collection

Article Engineering, Chemical

Porous polybenzimidazole membranes with high ion selectivity for the vanadium redox flow battery

Xuefu Che et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

Add to Collection

Article Electrochemistry

High-performance anion-exchange membrane water electrolysis

Ji Eun Park et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Electrochemistry

Pressurized operation of anion exchange membrane water electrolysis

Hiroshi Ito et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Electrochemistry

Graphene oxide and sulfonated-derivative: Proton transport properties and electrochemical behavior of Nafion-based nanocomposites

Cataldo Simari et al.

ELECTROCHIMICA ACTA (2019)

Add to Collection

Article Environmental Sciences

Fabrication and characterization of pyridinium functionalized anion exchange membranes for acid recovery

Muhammad Imran Khan et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Review Chemistry, Physical

The potential of proton exchange membrane-based electrolysis technology

Katherine Ayers

CURRENT OPINION IN ELECTROCHEMISTRY (2019)

Add to Collection

Article Engineering, Chemical

Crosslinked norbornene copolymer anion exchange membrane for fuel cells

Chao Wang et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Add to Collection

Review Chemistry, Physical

Review of cell performance in anion exchange membrane fuel cells

Dario R. Dekel

JOURNAL OF POWER SOURCES (2018)

Add to Collection

Article Polymer Science

Water Uptake Study of Anion Exchange Membranes

Yiwei Zheng et al.

MACROMOLECULES (2018)

Add to Collection

Article Chemistry, Physical

NMR investigation on nanocomposite membranes based on organosilica layered materials bearing different functional groups for PEMFCs

Isabella Nicotera et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Chemistry, Physical

Anionic conducting composite membranes based on aromatic polymer and layered double hydroxides

Maria Luisa Di Vona et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

A facile approach to fabricating organosilica layered material with sulfonic groups as an efficient filler for polymer electrolyte nanocomposites

Apostolos Enotiadis et al.

NEW JOURNAL OF CHEMISTRY (2017)

Add to Collection

Article Chemistry, Physical

Effect of Water on the Stability of Quaternary Ammonium Groups for Anion Exchange Membrane Fuel Cell Applications

Dario R. Dekel et al.

CHEMISTRY OF MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Nafion® nanocomposite membranes with enhanced properties at high temperature and low humidity environments

Lamprini G. Boutsika et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Add to Collection

Article Chemistry, Physical

An NMR study on the molecular dynamic and exchange effects in composite Nafion/sulfated titania membranes for PEMFCs

Isabella Nicotera et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Constructing ionic highway in alkaline polymer electrolytes

Jing Pan et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Review Electrochemistry

Polymer electrolyte membrane water electrolysis: status of technologies and potential applications in combination with renewable power sources

A. S. Arico et al.

JOURNAL OF APPLIED ELECTROCHEMISTRY (2013)

Add to Collection

Article Engineering, Chemical

Electrochemical characterization of a PEM water electrolyzer based on a sulfonated polysulfone membrane

S. Siracusano et al.

JOURNAL OF MEMBRANE SCIENCE (2013)

Add to Collection

Article Chemistry, Physical

Green methods for hydrogen production

Ibrahim Dincer

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Add to Collection

Article Engineering, Chemical

High ionic exchange capacity polyphenylsulfone (SPPSU) and polyethersulfone (SPES) cross-linked by annealing treatment: Thermal stability, hydration level and mechanical properties

M. L. Di Vona et al.

JOURNAL OF MEMBRANE SCIENCE (2010)

Add to Collection

Article Chemistry, Physical

Anionic polysulfone ionomers and membranes containing fluorenyl groups for anionic fuel cells

Junfeng Zhou et al.

JOURNAL OF POWER SOURCES (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.