4.7 Article

Effective removal of heavy metal-lead and inorganic salts by microporous carbon derived from Zeolitic Imidazolate Framework-67 electrode using capacitive deionization

Related references

Note: Only part of the references are listed.
Article Engineering, Environmental

Up-shifting the desalination rate limit of capacitive deionization via integrating chloride-capturing Bi nanocluster with flow-through cell architecture

Lihao Wang et al.

Summary: Faradic electrode-directed capacitive deionization (faradic-based CDI) is a green and eco-friendly technique with potential in addressing freshwater crisis. However, its practical applications are limited by slow desalination kinetics. In this study, a synergetic strategy combining material design and cell architecture was proposed to improve the desalination rate limit of faradic-based CDI. The integration of ultrasmall Bi nanoclusters impregnated carbon nanofibers as electrodes and a flow-through CDI system resulted in super-fast desalinization and excellent cyclic stability. This research opens up new possibilities for highly-efficient desalination systems based on faradic-based CDI.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Environmental

In situ synthesis of ultrasmall NaTi2(PO4)3 nanocube decorated carbon nanofiber network enables ultrafast and superstable rocking-chair capacitive deionization

Kai Wang et al.

Summary: Faradic-based capacitive deionization (CDI) has attracted attention in the desalination community. However, it faces issues such as imbalanced ion storage capacity, low desalination rate, and poor cycling stability. This study proposes an innovative strategy using carbon nanofiber-reinforced NaTi2(PO4)3 (eCNF/NTP) and a rational rocking-chair capacitive deionization (RCDI) cell architecture. The RCDI system equipped with eCNF/NTP electrode exhibits an excellent desalination performance and cycling stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Engineering, Chemical

Flexible nitrogen-doped carbon nanofiber-reinforced hierarchical hollow iron oxide nanorods as a binder-free electrode for efficient capacitive deionization

Ming Gao et al.

Summary: This study focuses on the development of a nitrogen-doped carbon nanofiber-reinforced hierarchical hollow iron oxide nanorods (Fe2O3@CNFs) material for efficient capacitive deionization desalination. The Fe2O3@CNFs material exhibits a unique hierarchical porous structure and prevents the agglomeration of Fe2O3 nanorods, leading to improved ionic/electronic transport. Without the addition of any binders or conductive additives, this material shows a high adsorption capacity (114.97 mg/g) and a rapid salt adsorption rate (7.79 mg/g min).

DESALINATION (2023)

Article Engineering, Environmental

Green double organic salt activation strategy for one-step synthesis of N-doped 3D hierarchical porous carbon for capacitive deionization

Mingxing Shi et al.

Summary: This study develops a green double organic salt activation strategy for fabricating high-performance CDI desalination using lotus stem. The resulting 3DNHPC exhibits a suitable porous structure and abundant surface active sites, showing excellent salt removal capability and adsorption capacity, as well as maintaining high stability.

CHEMICAL ENGINEERING JOURNAL (2023)

Article Chemistry, Multidisciplinary

In Situ Synthesis of Bismuth Nanoclusters within Carbon Nano-Bundles from Metal-Organic Framework for Chloride-Driven Electrochemical Deionization

Yong Liu et al.

Summary: The authors proposed a novel strategy to synthesize ultrasmall bismuth nanoclusters and applied them in electrochemical deionization to address global freshwater scarcity. This method achieved ultrafast desalination and outstanding stability.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Engineering, Chemical

Electro-enhanced adsorption of lead ions from slightly-polluted water by capacitive deionization

Ranran Wang et al.

Summary: In this study, rGO/NCDs composites were successfully synthesized for optimizing the preparation process of CDI electrode, exhibiting excellent electrochemical properties and superhydrophilic property. The CDI tests showed that the electrosorption capacity of rGO/25%NCDs electrode was higher, indicating a good removal effect on Pb2+ pollutants.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Review Engineering, Environmental

Recent progress in materials and architectures for capacitive deionization: A comprehensive review

Shreerang D. Datar et al.

Summary: Capacitive deionization is an emerging electrochemical technique for water desalination, with extensive research being conducted on architectures and materials to enhance electrosorption performance. Asymmetric architectures with faradaic materials are found to have superior performance compared to symmetric architectures. Faradaic materials also outperform carbon-based materials. Customization of architectures and materials allows for selectivity of target components and heavy metal removal. Factors such as synthesis procedures, additives, operational modes, and fouling can affect electrosorption performance. Further research is needed to fully understand and improve the performance of capacitive deionization.

WATER ENVIRONMENT RESEARCH (2022)

Article Engineering, Environmental

Functionalization of mesoporous carbons derived from pomelo peel as capacitive electrodes for preferential removal/recovery of copper and lead from contaminated water

Jiming Lu et al.

Summary: This study demonstrates the effectiveness of functionalized bio-sorbents derived from pomelo peel in rapidly and efficiently decontaminating water, with the potential for large-scale remediation strategies of contaminated wastewater.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Materials Science, Multidisciplinary

Improved electrosorption performance using acid treated electrode scaffold in capacitive deionization

Shreerang D. Datar et al.

Summary: This study successfully addresses the prevalent issue of co-ion expulsion in capacitive deionization (CDI) by using acid treated polyurethane sponge as a scaffold and nitrogen-doped carbon derived from camphor soot as an electrode material. The modified electrodes exhibit enhanced electrosorption performance and cyclic stability.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Article Chemistry, Physical

Zeolitic imidazolate framework-67 derived porous carbon electrodes for efficient capacitive deionization

Shreerang D. Datar et al.

Summary: Capacitive deionization (CDI) is a promising and environmentally friendly technology for water desalination. In this study, porous carbon derived from ZIF-67 is synthesized and studied for its electrosorption and deionization capabilities, showing significant improvements in specific capacitance and electrosorption capacity.

APPLIED SURFACE SCIENCE (2022)

Article Green & Sustainable Science & Technology

Efficient electro-assisted adsorption/desorption of phosphate on MOF-derived hierarchically porous carbon electrode

Mingming He et al.

Summary: In this study, a hierarchically porous carbon electrode derived from MOF (ZrMC) was fabricated for the selective electrosorption of phosphate. The electrode demonstrated high removal rate and maximum adsorption capacity, attributed to its porous structure, conductivity, and active centers. Additionally, the electrode showed excellent desorption capacity when a reversed voltage was applied. The electrosorption mechanism was comprehensively clarified by FTIR and XPS measurements.

JOURNAL OF CLEANER PRODUCTION (2022)

Article Energy & Fuels

Adsorption mechanism of a cationic dye on a biomass-derived micro- and mesoporous carbon: structural, kinetic, and equilibrium insight

Hosein Banna Motejadded Emrooz et al.

Summary: This research investigated the adsorption characteristics of methylene blue on Azolla-derived micro- and mesoporous carbon, finding that the porous activated carbon has a high adsorption capacity and the diffusion of methylene blue is a limiting factor in the adsorption process. Furthermore, the degree of graphitization of the carbon material decreases during adsorption, and surface nitrogen functional groups have an influence on the adsorption of methylene blue.

BIOMASS CONVERSION AND BIOREFINERY (2021)

Article Engineering, Chemical

Removal of AV 90 dye using ordered mesoporous carbon materials prepared via nanocasting of KIT-6: Adsorption isotherms, kinetics and thermodynamic analysis

Dilsad Dolunay Eslek Koyuncu et al.

Summary: By utilizing KIT-6 as a template, CMK-8 type ordered mesoporous carbon materials were synthesized. The optimal conditions for obtaining high uniformity, surface area, pore volume, and wall thickness were determined to be 2 M NaOH concentration and one leaching cycle. Adsorption studies showed that the highest removal efficiency for Acid Violet 90 dye was achieved at pH 2, with a Langmuir isotherm model providing the best fit to the data.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Environmental

Controlled synthesis of bismuth oxychloride-carbon nanofiber hybrid materials as highly efficient electrodes for rocking-chair capacitive deionization

Yong Liu et al.

Summary: The high-performance Cl--removal electrode material BiOCl-CNF was successfully designed by anchoring bismuth oxychloride nanostructures on electrospun carbon nanofibers, demonstrating outstanding desalination efficacy in terms of desalination capacity, energy consumption, and desalination rate. The results show that delicate design in Cl--removal electrode materials is crucial for improving desalination performance, with the BiOCl-CNF based RCDI system surpassing existing systems in the literature.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Food Science & Technology

Effect of metal atom in zeolitic imidazolate frameworks (ZIF-8 & 67) for removal of Pb2+ & Hg2+ from water

Khalil Ahmad et al.

Summary: Heavy metals, such as lead and mercury, pose a major threat to underground water, and the construction of effective materials is crucial to mitigating water pollution. The synthesized MOFs in the study displayed excellent ability to remove lead and mercury, with high environmental remediation performance.

FOOD AND CHEMICAL TOXICOLOGY (2021)

Article Chemistry, Physical

Selective fluoride removal in capacitive deionization by reduced graphene oxide/hydroxyapatite composite electrode

Gyuleen Park et al.

Summary: This study achieved selective fluoride removal in a CDI system using rGO/HA composite material, which showed a significantly higher fluoride removal capacity compared to the traditional AC electrode. Experimental results demonstrate an increase in fluoride removal capacity with the application of adequate voltage. Furthermore, the rGO/HA electrode exhibits stability and reusability in operation.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Materials Science, Multidisciplinary

Facile synthesis of Mg-formate MOF-derived mesoporous carbon for fast capacitive deionization

Taimoor Hussain et al.

Summary: This study presents a facile method for the fast synthesis of small-size magnesium formate MOF and its conversion into mesoporous carbon material with good electrochemical performance. The Mg-MOF-derived carbon electrode demonstrated high capacitive deionization capacity and a super fast desalination rate.

JOURNAL OF MATERIALS SCIENCE (2021)

Article Engineering, Chemical

Capacitive deionization of NaCl solution with hierarchical porous carbon materials derived from Mg-MOFs

Chun-Ping Li et al.

Summary: In this study, a novel carbon material (MMCK) derived from Mg-MOF-74 with super hydrophilicity and rich porous structure was prepared and investigated for capacitive deionization in NaCl aqueous solution. The MMCK showed high oxygen doping amount and exhibited a high electrosorption capacity, indicating its potential as a promising material for CDI.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Engineering, Chemical

Comparative study of electrosorption performance of solar reduced graphene oxide in flow-between and flow-through capacitive deionization architectures

Shreerang D. Datar et al.

Summary: A comparison was made between flow-between and flow-through capacitive deionization setups using solar reduced graphene oxide (SRGO) as an electrode material. Different cations (sodium and potassium) were studied to analyze their effect on electrosorption performance, with different voltage and salt solution concentrations used. The results were validated using Langmuir and Freundlich adsorption isotherms, along with a modified Donnan (mD) model for additional validation.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Chemistry, Physical

Selective electrosorption of Ca2+ by MXene cathodes coupled with NiAl-LMO anodes through ion intercalation

Jingqiu Sun et al.

Summary: A titanium carbide (MXene)-layered electrosorption electrode with high selectivity for Ca2+ was fabricated, showing potential for desalination applications; Ca2+ adsorption by the MXene electrode was significantly enhanced when a Ni-Al layered metal oxide anion intercalation electrode was used as the counter electrode, leading to improved Ca2+ removal efficiency and stability in capacitive deionization.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Review Chemistry, Multidisciplinary

Recent Advances in Faradic Electrochemical Deionization: System Architectures versus Electrode Materials

Yong Liu et al.

Summary: Traditional carbon-based CDI systems have low desalination capacity, and research has shifted towards the development of faradic electrochemical desalination systems using faradic materials. Focus is primarily on faradic reactions and materials, yet the correlation between faradic materials and system architectures remains relatively unexplored.

ACS NANO (2021)

Review Chemistry, Multidisciplinary

New Strategies for Novel MOF-Derived Carbon Materials Based on Nanoarchitectures

Chaohai Wang et al.

Article Engineering, Chemical

Capacitive deionization with MoS2/g-C3N4 electrodes

Shichao Tian et al.

DESALINATION (2020)

Article Engineering, Chemical

Highly efficient water softening by mordenite modified cathode in asymmetric capacitive deionization

Pengfei Nie et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Article Engineering, Environmental

Electro-assisted Adsorption of Zn(II) on Activated Carbon Cloth in Batch-Flow Mode: Experimental and Theoretical Investigations

Wangwang Tang et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Chemistry, Physical

Selective adsorption of fluoride from drinking water using NiAl-layered metal oxide film electrode

Zhaoyu Bai et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2019)

Article Nanoscience & Nanotechnology

ZIF-67-Derived N-Doped Co/C Nanocubes as High-Performance Anode Materials for Lithium-Ion Batteries

Lei Wang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Engineering, Environmental

A novel monolith ZnS-ZIF-8 adsorption material for ultraeffective Hg (II) capture from wastewater

Fengtai Liu et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

Article Chemistry, Analytical

Electrochemical sensing of lead in drinking water using β-cyclodextrin-modified MWCNTs

Arif Ul Alam et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Article Engineering, Environmental

Removal of lead ions from water by capacitive deionization electrode materials derived from chicken feathers

T. Alfredy et al.

JOURNAL OF WATER REUSE AND DESALINATION (2019)

Article Engineering, Environmental

Selective removal of lead ions through capacitive deionization: Role of ion-exchange membrane

Qianqian Dong et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Engineering, Environmental

Capacitive deionization using nitrogen-doped mesostructured carbons for highly efficient brackish water desalination

Xingtao Xu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Engineering, Environmental

ZIF-67 derived hollow cobalt sulfide as superior adsorbent for effective adsorption removal of ciprofloxacin antibiotics

Chunhong Liang et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Engineering, Environmental

High-Performance Capacitive Deionization via Manganese OxideCoated, Vertically Aligned Carbon Nanotube

Wenbo Shi et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY LETTERS (2018)

Article Chemistry, Multidisciplinary

1 Zn-doped ZIF-67 as catalyst for the CO2 fixation into cyclic carbonates

Adriano Zanon et al.

JOURNAL OF CO2 UTILIZATION (2017)

Article Nanoscience & Nanotechnology

Co3O4-x-Carbon@Fe2-yCoyO3 Heterostructural Hollow Polyhedrons for the Oxygen Evolution Reaction

Wangwang Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Physical

Visible-light reduction CO2 with dodecahedral zeolitic imidazolate framework ZIF-67 as an efficient co-catalyst

Jiani Qin et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2017)

Article Engineering, Environmental

Individual and competitive removal of heavy metals using capacitive deionization

Zhe Huang et al.

JOURNAL OF HAZARDOUS MATERIALS (2016)

Article Chemistry, Physical

Nanoporous carbons derived from MOFs as metal-free catalysts for selective aerobic oxidations

Xi Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

Article Chemistry, Multidisciplinary

Metal-organic framework-derived porous carbon polyhedra for highly efficient capacitive deionization

Yong Liu et al.

CHEMICAL COMMUNICATIONS (2015)

Article Materials Science, Multidisciplinary

Improvement of water softening efficiency in capacitive deionization by ultra purification process of reduced graphene oxide

Trinh Ngoc Tuan et al.

CURRENT APPLIED PHYSICS (2015)

Article Electrochemistry

Nitrogen-doped porous carbon spheres for highly efficient capacitive deionization

Yong Liu et al.

ELECTROCHIMICA ACTA (2015)

Article Engineering, Chemical

Evaluation of operational parameters for a capacitive deionization reactor employing asymmetric electrodes

Julio J. Lado et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2014)

Article Chemistry, Multidisciplinary

Recent advances in micro-/nano-structured hollow spheres for energy applications: From simple to complex systems

Xiaoyong Lai et al.

ENERGY & ENVIRONMENTAL SCIENCE (2012)

Article Chemistry, Analytical

A comparative study on electrosorptive behavior of carbon nanotubes and graphene for capacitive deionization

Haibo Li et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2011)

Article Chemistry, Multidisciplinary

Ion exchange and adsorption equilibrium studies on clinoptilolite, bentonite and vermiculite

V. J. Inglezakis et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2010)

Article Chemistry, Analytical

Migration of Co2+ in zeolite CoY induced by water, ammonia and pyridine adsorption

Kinga Gora-Marek

VIBRATIONAL SPECTROSCOPY (2010)

Review Chemistry, Multidisciplinary

Metal-organic framework materials as catalysts

JeongYong Lee et al.

CHEMICAL SOCIETY REVIEWS (2009)

Article Engineering, Chemical

Electrodialysis-Based Separation Technologies: A Critical Review

Tongwen Xu et al.

AICHE JOURNAL (2008)

Article Engineering, Chemical

Electrochemical water softening: principle and application

C. Gabrielli et al.

DESALINATION (2006)

Article Engineering, Chemical

Nitrate removal with reverse osmosis in a rural area in South Africa

JJ Schoeman et al.

DESALINATION (2003)