☆ 4.7 Article

Fluorite-pyrochlore structured high-entropy oxides: Tuning the ratio of B-site cations for resistance to CMAS corrosion

CORROSION SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

High-entropy (Y0.2 Gd0.2 Dy0.2 Er0.2 Yb0.2 )2Hf2O7 ceramic: A promising thermal barrier coating material

Longkang Cong et al.

Summary: In this study, a novel high entropy hafnate (Y0.2Gd0.2Dy0.2Er0.2Yb0.2)(2)Hf2O7 was synthesized and characterized for potential use as a thermal barrier coating (TBC) material in gas turbines. The (Y0.2Gd0.2Dy0.2Er0.2Yb0.2)(2)Hf2O7 demonstrated excellent phase stability, chemical compatibility with Al2O3, and lower thermal conductivity compared to other TBC materials. These results suggest that (Y0.2Gd0.2Dy0.2Er0.2Yb0.2)(2)Hf2O7 is a promising candidate for the next generation TBC materials.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Ceramics

Graceful behavior during CMAS corrosion of a high-entropy rare-earth zirconate for thermal barrier coating material

Tian-Zhe Tu et al.

Summary: The study reveals that HEZ ceramics show a graceful behavior to CMAS corrosion, much better than LZ ceramics. HEZ only suffered from dissolution and re-precipitation due to CMAS corrosion, while additional grain boundary corrosion existed in the LZ system. The fine-grained structure of the precipitated high-entropy apatite resulted in a reaction layer without cracks. Therefore, HEZ is a promising candidate for TBCs with extreme resistance to CMAS corrosion.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Calcium-magnesium-alumina-silicate (CMAS) resistant high entropy ceramic (Y0.2Gd0.2Er0.2Yb0.2Lu0.2)2Zr2O7 for thermal barrier coatings

Shuxiang Deng et al.

Summary: A novel high-entropy material (Y0.2Gd0.2Er0.2Yb0.2Lu0.2)(2)Zr2O7 was successfully synthesized and shows promising properties as a thermal barrier coating material. It exhibits excellent thermal properties and corrosion resistance.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Ceramics

Phase evolution and thermophysical properties of high-entropy RE2(Y0.2Yb0.2Nb0.2Ta0.2Ce0.2)2O7 oxides

Liang Xu et al.

Summary: In this study, a series of high-entropy oxides were prepared to investigate the impact of incorporating heterovalent cations on thermal conductivity and phase stability. It was found that the high-entropy RE2(Y0.2Yb0.2Nb0.2Ta0.2Ce0.2)(2)O-7 oxides exhibit low thermal conductivity and high-temperature stability, making them potential candidates for thermal barrier coating materials.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Ceramics

High-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)2Ce2O7: A potential thermal barrier material with improved thermo-physical properties

Yun Xue et al.

Summary: By designing and synthesizing high-entropy (La0.2Nd0.2Sm0.2Eu0.2Gd0.2)(2)Ce2O7, the thermal expansion property of oxides is improved and the thermal conductivity is reduced. The multicomponent material has a higher thermal expansion coefficient and prominent thermal insulation behavior, and maintains phase stability at high temperatures, making it a promising TBC material.

JOURNAL OF ADVANCED CERAMICS (2022)

Add to Collection

Article Materials Science, Ceramics

Reaction mechanisms of Gd2Zr2O7 in silicate melts derived from CAS

Alice Dolmaire et al.

Summary: In this study, the infiltration mechanisms of sand and ashes (CAS) in aircraft thermal barrier coatings (TBC) at high temperatures were investigated. The reactivity between the pyrochlore phase Gd2Zr2O7 (GZ) and CMAS-derived oxides was examined to understand the diffusion, stability, and role of the reaction products in the CAS-GZ system. The diffusion mechanisms of Gd+III, Si+IV, and O-II at the GZ/SiO2 interface were discussed, providing insights into the predominant formation of Gd-oxyapatites at the silica-rich interfaces and the role of Gd2Si2O7 in hindering Si+IV species diffusion, which explains the effective prevention of CMAS infiltration by GZ coatings.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Ceramics

Sand corrosion, thermal expansion, and ablation of medium- and high-entropy compositionally complex fluorite oxides

Andrew J. Wright et al.

Summary: The new class of CCFOs shows improved protective properties at intermediate temperatures, but also higher chemical reactivity with sand at elevated temperatures. The high-entropy oxide exhibits no grain boundary penetration at all temperatures, but significant reaction and precipitation occur. Additionally, these materials have higher thermal expansion coefficients compared to conventional materials.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

A new class of high-entropy fluorite oxides with tunable expansion coefficients, low thermal conductivity and exceptional sintering resistance

Liang Xu et al.

Summary: The high-entropy fluorite-type oxides (HEFOs) synthesized in this study possess unique thermal expansion coefficients and low thermal conductivities, making them suitable candidates for high-temperature thermal barrier coatings and insulating materials.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Add to Collection

Article Materials Science, Ceramics

Effects of surface roughness on CMAS corrosion behavior for thermal barrier coating applications

Lei Guo et al.

Summary: Reducing the surface roughness of thermal barrier coating materials such as YSZ, GdPO4, and LaPO4 improves their resistance to CMAS corrosion, as observed in this study.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Review Materials Science, Ceramics

High-entropy ceramics: Present status, challenges, and a look forward

Huimin Xiang et al.

Summary: High-entropy ceramics are solid solutions of inorganic compounds with diverse crystal and electronic structures, providing large space for property tuning through band structure and phonon engineering. In addition to traditional strengthening, hardening, and low thermal conductivity, HECs exhibit new properties such as colossal dielectric constant and super ionic conductivity. Challenges in processing, characterization, and property predictions are highlighted, along with future directions for material exploration and in-depth characterization.

JOURNAL OF ADVANCED CERAMICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Single-phase duodenary high-entropy fluorite/pyrochlore oxides with an order-disorder transition

Andrew J. Wright et al.

Summary: A series of duodenary high-entropy oxides containing eleven metal cations have been investigated in this study, showing single high-entropy phases with order-disorder transitions and reduced thermal conductivity as composition changes. The study suggests a new route to tailor high-entropy ceramics by controlling cation ordering vs. disordering, with abrupt increases in Young's modulus at low mixing concentrations near endmembers.

ACTA MATERIALIA (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Calcia-magnesia-alumina-silicate (CMAS) attack mechanisms and roadmap towards Sandphobic thermal and environmental barrier coatings

Andy Nieto et al.

Summary: This review critically examines the current understanding of CMAS degradation mechanisms and mitigation approaches, emphasizing the importance of designing materials approaches to mitigate CMAS attack and presenting key future research areas for 'sandphobic' thermal and environmental barrier systems.

INTERNATIONAL MATERIALS REVIEWS (2021)

Add to Collection

Article Materials Science, Ceramics

A novel CMAS-resistant material based on thermodynamic equilibrium design: Apatite-type Gd10(SiO4)6O3

Di Wu et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Add to Collection

Review Nanoscience & Nanotechnology

High-entropy ceramics

Corey Oses et al.

NATURE REVIEWS MATERIALS (2020)

Add to Collection

Article Materials Science, Coatings & Films

Improving the thermal shock resistance and fracture toughness of synthesized La2Ce2O7 thermal barrier coatings through formation of La2Ce2O7/YSZ composite coating via air plasma spraying

A. M. Fathi Dehkharghani et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Influence of Y3Al5O12 doping on mechanical properties and thermal conductivity of Sm2Zr2O7-Y3Al5O12 composite ceramics

Shuqin Wu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Ceramics

Estimation of CMAS infiltration depth in EB-PVD TBCs: A new constraint model supported with experimental approach

Ravisankar Naraparaju et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Thermophysical properties of solution precursor plasma-sprayed La2Ce2O7 thermal barrier coatings

Bei-Bei Feng et al.

RARE METALS (2019)

Add to Collection

Article Materials Science, Ceramics

Thermal and mechanical properties of Ta2O5 doped La2Ce2O7 thermal barrier coatings prepared by atmospheric plasma spraying

Hao Zhang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Zirconium silicate growth induced by the thermochemical interaction of yttria-stablized zirconia coatings with molten CMAS deposits

Guozheng Li et al.

CORROSION SCIENCE (2019)

Add to Collection

Article Materials Science, Ceramics

Transient and steady states of Gd2Zr2O7 and 2ZrO2•Y2O3 (ss) interactions with calcium magnesium aluminium silicates

Sandrine Duluard et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Engineering, Mechanical

Ceramic Matrix Composite Materials for Engine Exhaust Systems on Next-Generation Vertical Lift Vehicles

Michael J. Walock et al.

JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Charge-Induced Disorder Controls the Thermal Conductivity of Entropy-Stabilized Oxides

Jeffrey L. Braun et al.

ADVANCED MATERIALS (2018)

Add to Collection

Article Engineering, Mechanical

Damage mechanisms in an EB-PVD thermal barrier coating system during TMF and TGMF testing conditions under combustion environment

Florent Mauget et al.

INTERNATIONAL JOURNAL OF FATIGUE (2017)

Add to Collection

Article Chemistry, Physical

Wetting and Spreading of Molten Volcanic Ash in Jet Engines

Wenjia Song et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)

Add to Collection

Article Materials Science, Ceramics

Gadolinium oxide solubility in molten silicate: dissolution mechanism and stability of Ca2Gd8(SiO4)6O2 and Ca3Gd2(Si3O9)2 silicate phases

F. Perrudin et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

La2(Zr0.7Ce0.3)2O7 thermal barrier coatings prepared by electron beam-physical vapor deposition that are resistant to high temperature attack by molten silicate

Xin Zhou et al.

CORROSION SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Calcia-magnesia-alumino-silicate (CMAS)-induced degradation and failure of air plasma sprayed yttria-stabilized zirconia thermal barrier coatings

Amanda R. Krause et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Multidisciplinary Sciences

Volcanic ash melting under conditions relevant to ash turbine interactions

Wenjia Song et al.

NATURE COMMUNICATIONS (2016)

Add to Collection

Article Materials Science, Ceramics

Mechanical and thermal properties of fine-grained quasi-eutectoid (La1-xYbx)2Zr2O7 ceramics

Xiaorui Ren et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2015)

Add to Collection

Article Materials Science, Coatings & Films

Degradation of La2Zr2O7 and other novel EB-PVD thermal barrier coatings by CIVIAS (CaO-MgO-Al2O3-SiO2) and volcanic ash deposits

Uwe Schulz et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal-barrier coatings for more efficient gas-turbine engines

David R. Clarke et al.

MRS BULLETIN (2012)

Add to Collection

Article Materials Science, Ceramics

High-Temperature Corrosion of EB-PVD Yttria Partially Stabilized Zirconia Thermal Barrier Coatings with an Artificial Volcanic Ash Overlay

Peter Mechnich et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2011)

Add to Collection

Article Materials Science, Ceramics

Thermal conductivity of plasma sprayed SM2Zr2O7 coatings

Jianhua Yu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)

Add to Collection

Article Thermodynamics

Application of Neumann-Kopp rule for the estimation of heat capacity of mixed oxides

J. Leitner et al.

THERMOCHIMICA ACTA (2010)

Add to Collection

Article Materials Science, Ceramics

Thermochemical interaction of thermal barrier coatings with molten CaO-MgO-Al2O3-SiO2 (CMAS) deposits

Stephan Kramer et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructural aspects of the sintering of thermal barrier coatings

V Lughi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Add to Collection

Article Materials Science, Ceramics

Ceramic materials for thermal barrier coatings

XQ Cao et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2004)

Add to Collection

Article Chemistry, Multidisciplinary

Lanthanum-cerium oxide as a thermal barrier-coating material for high-temperature applications

XQ Cao et al.

ADVANCED MATERIALS (2003)

Add to Collection

Review Multidisciplinary Sciences

Materials science - Thermal barrier coatings for gas-turbine engine applications

NP Padture et al.

SCIENCE (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal conductivity of dense and porous yttria-stabilized zirconia

KW Schlichting et al.

JOURNAL OF MATERIALS SCIENCE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.