Related references
Note: Only part of the references are listed.Bond performance between textile reinforced concrete (TRC) and brick masonry under conventional environment
Yin Shiping et al.
STRUCTURES (2022)
Theoretical analysis of the adhesion law of stainless steel FRCM strengthening systems
Emanuela Speranzini et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Diagonal tensile tests on historical brick masonry wallets strengthened with fabric reinforced cementitious mortar
Pelin E. Mezrea et al.
STRUCTURES (2021)
Effect of eccentricity on retrofitting efficiency of basalt textile reinforced concrete on partially damaged masonry columns
Jiyang Wang et al.
COMPOSITE STRUCTURES (2020)
Comparative experimental analysis on the in-plane shear performance of brick masonry walls strengthened with different fiber reinforced materials
Shuaian Cheng et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Masonry columns confined with glass textile-reinforced high ductile concrete (TRHDC) jacket
Tong Li et al.
ENGINEERING STRUCTURES (2020)
Lessons Learned on the Tensile and Bond Behavior of Fabric Reinforced Cementitious Matrix (FRCM) Composites
Gianmarco de Felice et al.
FRONTIERS IN BUILT ENVIRONMENT (2020)
Shear strengthening of masonry wallettes resorting to structural repointing and FRCM composites
Susanna Casacci et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
In-plane shear capacity of tuff masonry walls with traditional and innovative Composite Reinforced Mortars (CRM)
Marta Del Zoppo et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Analysis of FRCM and CRM parameters for the in-plane shear strengthening of different URM types
Marta Del Zoppo et al.
COMPOSITES PART B-ENGINEERING (2019)
Comparison of different types of TRM composites for strengthening masonry panels
Xuan Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Experimental In-Plane Shear Capacity of Clay Brick Masonry Panels Strengthened with FRCM and FRM Composites
Marta Del Zoppo et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2019)
Bond between Carbon Fabric-Reinforced Cementitious Matrix and Masonry Substrate
Luciano Ombres et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)
Ancient masonry arches and vaults strengthened with TRM, SRG and FRP composites: Experimental evaluation
Francesca Giulia Carozzi et al.
COMPOSITE STRUCTURES (2018)
Experimental investigation on the effect of mortar grade on the compressive behaviour of FRCM confined masonry columns
Giovanni Minafo et al.
COMPOSITES PART B-ENGINEERING (2018)
Full-scale tests on masonry vaults strengthened with Steel Reinforced Grout
Stefano De Santis et al.
COMPOSITES PART B-ENGINEERING (2018)
Experimental investigation of in-plane shear behaviour of grey clay brick masonry panels strengthened with SRG
Xuan Wang et al.
ENGINEERING STRUCTURES (2018)
In-Plane Shear Strength Improvement of Hollow Concrete Masonry Panels Using a Fabric-Reinforced Cementitious Matrix
N. Ismail et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)
State-of-the-art on strengthening of masonry structures with textile reinforced mortar (TRM)
Leonidas Alexandros S. Kouris et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
External Jacketing of Unreinforced Historical Masonry Piers with Open-Grid Basalt-Reinforced Mortar
Pelin E. Mezrea et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2017)
Diagonal Shear and Out-of-Plane Flexural Strength of Fabric-Reinforced Cementitious Matrix-Strengthened Masonry Walletes
S. Lalit Sagar et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2017)
Round Robin Test on tensile and bond behaviour of Steel Reinforced Grout systems
Stefano De Santis et al.
COMPOSITES PART B-ENGINEERING (2017)
Comparative experimental analysis on the compressive behaviour of masonry columns strengthened by FRP, BFRCM or steel wires
Marinella Fossetti et al.
COMPOSITES PART B-ENGINEERING (2017)
Analytical stress-strain law of FRP confined masonry in compression: Literature review and design provisions
Giovanni Minafo et al.
COMPOSITES PART B-ENGINEERING (2017)
An innovative structural and energy retrofitting system for URM walls using textile reinforced mortars combined with thermal insulation: Mechanical and fire behavior
Thanasis C. Triantafillou et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Experimental investigation of tuff masonry panels reinforced with surface bonded basalt textile-reinforced mortar
Giancarlo Marcari et al.
COMPOSITES PART B-ENGINEERING (2017)
Influence of mechanical properties, anisotropy, surface roughness and porosity of brick on FRP debonding force
Enrico Sassoni et al.
COMPOSITES PART B-ENGINEERING (2017)
Experimental Investigation on Bond Behavior of Cement-Matrix-Based Composites for Strengthening of Masonry Structures
Valerio Alecci et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2016)
Steel reinforced grout systems for the strengthening of masonry structures
Stefano De Santis et al.
COMPOSITE STRUCTURES (2015)
Experimental and analytical study to evaluate the effectiveness of an in-plane reinforcement for masonry walls using GFRP meshes
Natalino Gattesco et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Earthquake Performance of Two Vintage URM Buildings Retrofitted Using Surface Bonded GFRP: Case Study
Dmytro Dizhur et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)
Diagonal compression tests on masonry walls strengthened with a GFRP mesh reinforced mortar coating
N. Gattesco et al.
BULLETIN OF EARTHQUAKE ENGINEERING (2015)
Shear strengthening of wall panels through jacketing with cement mortar reinforced by GFRP grids
Marco Corradi et al.
COMPOSITES PART B-ENGINEERING (2014)
Current practice and open issues in strengthening historical buildings with composites
Maria Rosa Valluzzi et al.
MATERIALS AND STRUCTURES (2014)
Out-of-plane behaviour of infill masonry panels strengthened with composite materials
Maria Rosa Valluzzi et al.
MATERIALS AND STRUCTURES (2014)
Strengthening of masonry arches with Textile-Reinforced Mortar: experimental behaviour and analytical approaches
Leire Garmendia et al.
MATERIALS AND STRUCTURES (2014)
In-plane behaviour of tuff masonry strengthened with inorganic matrix-grid composites
Fulvio Parisi et al.
COMPOSITES PART B-ENGINEERING (2013)
In-Plane Shear Improvement of Unreinforced Masonry Wall Panels Using NSM CFRP Strips
Dmytro Dizhur et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2013)
In-Plane Lateral Response of a Full-Scale Masonry Subassemblage with and without an Inorganic Matrix-Grid Strengthening System
N. Augenti et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2011)
Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading
Catherine G. Papanicolaou et al.
MATERIALS AND STRUCTURES (2007)
Experimental in-plane behavior of tuff masonry strengthened with cementitious matrix-grid composites
A. Prota et al.
JOURNAL OF COMPOSITES FOR CONSTRUCTION (2006)