☆ 4.7 Article

Short-term durability of GFRP stirrups under wet-dry and freeze-thaw cycles

CONSTRUCTION AND BUILDING MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Civil

Bond between Sand-Coated GFRP Bars and Normal-Strength, Self-Compacting, and Fiber-Reinforced Concrete under Seawater and Alkaline Solution

Milad Shakiba et al.

Summary: The bond durability between fiber-reinforced polymer (FRP) bars and concrete is examined after exposure to seawater and alkaline solution. The study finds that beams with sand-coated GFRP bars have less reduction in bond strength after exposure to seawater compared to alkaline solution, while the opposite effect is observed for beams with steel bars. Additionally, the type of concrete plays a role in the bond durability, with higher density, strength, and lower permeability resulting in greater bond strength and less reduction.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2023)

Add to Collection

Article Construction & Building Technology

Bond durability between anchored GFRP bar and seawater concrete under offshore environmental conditions

Hamidreza Kazemi et al.

Summary: The lower bond strength of FRP bars to concrete compared to steel bars has hindered the widespread use of FRP-reinforced concrete under extreme loading. Additionally, the bond degradation between FRP reinforcement and concretes in aggressive environments is a concern. This study used an innovative anchorage system to strengthen the bond between seawater concrete and GFRP bars, and found that the system improved the bond strength and changed the failure mode.

MATERIALS AND STRUCTURES (2023)

Add to Collection

Review Construction & Building Technology

Durability of tubular sea water sea sand concrete and fibre-reinforced polymer hybrid structures: Mechanisms and effective parameters: Critical overview and discussion

Benzen Benny et al.

Summary: In order to reduce the adverse environmental impacts of ordinary concrete, researchers have proposed using seawater and sea sand concrete (SWSSC) reinforced with fibre-reinforced polymer (FRP) composites as an environmentally friendly alternative. Carbon FRP has been found to have superior structural performance, but its high cost limits its widespread application. Glass and basalt fibers, on the other hand, show significant mechanical property degradation in SWSSC environment. Therefore, a clear understanding of the degradation mechanisms and the effective parameters of different FRP tubes used with SWSSC is crucial to overcome these challenges.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Engineering, Multidisciplinary

A case study on the feasibility of using static-cast fibre-reinforced concrete electric poles fully reinforced with glass fibre reinforced polymer bars and stirrups

Milad Shakiba et al.

Summary: This study investigated the structural performance of full-scale reinforced concrete utility poles fully reinforced with glass fibre reinforced polymer (GFRP) bars through experimental methods. An innovative anchorage system was used to address the weak bond strength between GFRP bars and concrete. The crack propagation and load-carrying capacity of GFRP-reinforced fibre-reinforced concrete (FRC) poles were compared with normal concrete poles.

RESULTS IN ENGINEERING (2023)

Add to Collection

Article Polymer Science

Fibre-Reinforced Polymer Reinforced Concrete Members under Elevated Temperatures: A Review on Structural Performance

Fariborz Sharifianjazi et al.

Summary: This paper reviews over 100 research studies focused on the structural responses of FRP-reinforced/strengthened concrete structures after exposure to elevated temperatures. It is generally accepted that the ultimate strength, bond strength, and structure stiffness of concrete decrease as the temperature increases. However, the mechanical properties of the resin seem to be preserved at high temperatures in the case of post curing.

POLYMERS (2022)

Add to Collection

Article Construction & Building Technology

Performance of glued-in rod timber joints under seawater and UV exposure cycles

Mohammad Shekarchi et al.

Summary: This paper investigates the pull-out performance of glued-in rod timber connections under different exposure conditions including seawater wetting/drying cycles and seawater wetting/drying plus UV radiation cycles. The results show that the connection resistance decreases significantly under harsh environmental conditions, with the failure mode changing from ductile to brittle.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Enhancement of the bond behaviour between sand coated GFRP bar and normal concrete using innovative composite anchor heads

Milad Shakiba et al.

Summary: In this experimental study, innovative anchorage systems made from glass fibre cloth and epoxy resin were used to enhance the bond behaviour between GFRP bars and concrete. The results showed that the anchor systems significantly increased the ultimate tensile load of GFRP bars in high-strength concrete.

MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Construction & Building Technology

Residual flexural capacity of pre-cracked RC beams exposed to chloride penetration at the sea surface temperature

Masoume Hoseinzade et al.

Summary: This study investigated the behavior of pre-cracked reinforced concrete beams in a chloride environment. The results showed that wetting-drying cycles had more negative effects on the specimens than full immersion, and the corrosion ratio of steel was directly correlated with crack width and exposure conditions.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Construction & Building Technology

Bond-slip performance of GFRP and steel reinforced beams under wet-dry and freeze-thaw cycles: The effect of concrete type

Milad Shakiba et al.

Summary: This experimental study investigates the bond-slip performance between glass fibre reinforced polymer (GFRP) bars and different types of concrete under freeze-thaw and wet-dry cycles. The results show that GFRP reinforced beams experience less bond strength reduction compared to steel reinforced beams. Steel reinforced beams fail due to concrete crushing, while GFRP reinforced beams fail due to GFRP surface peeling-off. Steel reinforced beams also experience greater stiffness reductions than GFRP reinforced beams when subjected to seawater wet-dry cycles.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Civil

Enhancement of punching strength in GFRP reinforced single footings by means of handmade GFRP shear bands

Alireza Doostmohamadi et al.

Summary: In this study, four full-scale specimens were cast to investigate the effects of handmade GFRP shear bands on the punching behavior of single footings. The results showed that the use of GFRP shear bands increased cracking resistance, maximum tolerable deflection, and failure time, providing an early warning for occupants.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Using four-point flexure test to investigate effects of temperature and bar size on the tensile properties of GFRP bars

Seyed Mohammad Hosseini et al.

Summary: This experimental study investigates the mechanical behavior of GFRP bars at different temperatures and finds that temperature variation degrades their tensile strength. The results obtained from four-point flexure test slightly differ from those obtained from direct tensile test. Analysis using probability models shows that the diameter of the bars significantly affects the tensile strength variations under temperature fluctuations.

POLYMER TESTING (2022)

Add to Collection

Review Construction & Building Technology

A review on mechanical properties and deterioration mechanisms of FRP bars under severe environmental and loading conditions

Guangyan Feng et al.

Summary: Rebar corrosion is a common issue in reinforced concrete structures, but it can be effectively resolved by replacing steel rebar with FRP bar. However, the mechanical performance of FRP bars can still deteriorate under severe conditions. Therefore, it is important to understand the degradation mechanisms and enhance their durability performance. This study critically reviews the influences of various factors on the mechanical properties of FRP bars and evaluates their degradation in different solutions. It also discusses the effects of wet-dry and freeze-thaw cycles. Prediction models for the long-term durability of FRP bars are summarized. The findings of this study provide insights for the research and application of FRP bars in severe conditions.

CEMENT & CONCRETE COMPOSITES (2022)

Add to Collection

Article Mechanics

Durability of fibre-reinforced polymer-wood composite members: An overview

Milad Bazli et al.

Summary: This paper reviews over 100 research studies on the durability of timber structures strengthened with FRP composites, highlighting the significant degradation in performance when exposed to harsh environments. The level of degradation depends on the type of environment and conditioning duration, and discusses the degradation values of mechanical characteristics, failure modes, and degradation mechanisms.

COMPOSITE STRUCTURES (2022)

Add to Collection

Review Construction & Building Technology

Durability of FRP bars and FRP bar reinforced seawater sea sand concrete structures in marine environments

Kaijian Zhang et al.

Summary: FRP materials have durability issues in marine environments, with the alkaline environment and salt ions accelerating the dissolution of resin and weakening bonding between FRP bars and concrete, resulting in reduced mechanical properties and decreased load-bearing capacity of components.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Engineering, Civil

Bond-slip behaviour between GFRP/steel bars and seawater concrete after exposure to environmental conditions

Hamidreza Kazemi et al.

Summary: This experimental study investigated the bond-slip durability of glass fibre reinforced polymer (GFRP) and steel bars embedded in seawater concrete. The results showed that seawater and wet-dry cycles had minimal effects on the bond strength of steel bars, but had some impact on GFRP.

ENGINEERING STRUCTURES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Bond between Fibre-Reinforced Polymer Tubes and Sea Water Sea Sand Concrete: Mechanisms and Effective Parameters: Critical Overview and Discussion

Johanna Dorothea Luck et al.

Summary: Using FRP in construction can prevent corrosion issues, while SWSSC can reduce environmental problems and resource shortages. The paper reviews the bond performance between FRP tube and concrete, highlighting the importance of bond strength and cyclic behavior.

FIBERS (2022)

Add to Collection

Article Construction & Building Technology

Durability of glass-fibre-reinforced polymer composites under seawater and sea-sand concrete coupled with harsh outdoor environments

Milad Bazli et al.

Summary: This article investigated the durability of different glass-fibre-reinforced polymer composites under harsh outdoor conditions and analyzed the parameters affecting their mechanical properties. The study found that the mechanical properties of the composites would decrease under different environmental conditions.

ADVANCES IN STRUCTURAL ENGINEERING (2021)

Add to Collection

Article Mechanics

Effect of mat anchorage on flexural bonding strength between concrete and sand coated GFRP bars

Milad Shakiba et al.

Summary: The study found that the use of anchorage systems can significantly improve the bond between concrete and GFRP bars, but increasing the diameter, length, and number of anchorages did not have a significant impact on bonding. Additionally, as the compressive strength of the concrete increased, the stress developed in GFRP bars also increased. The empirical relations proposed by various international codes and guidelines were found to provide conservative results for development length.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Mechanics

Study on the durability of GFRP bars and carbon/glass hybrid fiber reinforced polymer (HFRP) bars aged in alkaline solution

Yunfeng Pan et al.

Summary: The study found that the remaining interlaminar shear strengths of HFRP bars were larger than that of GFRP bars after being aged in alkaline solution, and deterioration of HFRP bars occurred at the CFRP/CFRP interface in alkaline solution. The long-term interlaminar shear strength of GFRP and HFRP bars aged in alkaline solution was predicted using the Arrhenius theory. The research shows that the CFRP layer enhances the durability of GFRP bars in alkaline environment due to the delayed water and OH- diffusion in CFRP and the better alkaline resistance of CFRP.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Influence of elevated temperatures on the bond behaviour of ribbed GFRP bars in concrete

Ines C. Rosa et al.

Summary: This study investigates the bond behavior between GFRP rebars and concrete at moderately elevated temperatures through steady-state tensile and pull-out tests. The results show that the surface finish and Tg value of the rebars are key parameters affecting bond strength under increased temperatures.

CEMENT & CONCRETE COMPOSITES (2021)

Add to Collection

Article Construction & Building Technology

Degradation of glass fiber reinforced polymer (GFRP) bars in concrete environment

Paulina Arczewska et al.

Summary: The paper investigates the degradation of tensile, shear, and flexure properties of glass fiber reinforced polymer (GFRP) bars when immersed in a highly alkaline solution. The study shows that immersion in high pH solutions reduces the strength of the bars, with degradation rate dependent on the temperature and shape of the bars. Smaller diameter bars deteriorate faster than larger ones, and bars under flexural strength degrade faster than those under direct tensile and shear strengths.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Construction & Building Technology

Hybrid fibre reinforced polymer and seawater sea sand concrete structures: A systematic review on short-term and long-term structural performance

Milad Bazli et al.

Summary: This paper systematically reviews the use of hybrid seawater sea sand concrete and fibre reinforced polymer composites in coastal areas, discussing their ecological benefits, structural performance, and microstructural properties. Various systems, including FRP reinforced SWSSC beams and SWSSC filled FRP tubes, are presented and recommendations for future investigations are made. This overview aims to provide a foundation for better understanding the mechanical and microstructural properties of FRP-SWSSC structures in aggressive environments.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Experimental investigation of residual flexural capacity of damaged reinforced concrete beams exposed to elevated temperatures

Mohammadmahdi Esfahani et al.

Summary: The study revealed that both elevated temperatures and pre-existing damages significantly affected the crack initiation and maximum crack width of concrete; the initial stiffness of beam specimens decreased with increasing exposed temperature, with a maximum reduction of 58%, in nearly the same reduction rate as the compressive strength of concrete; the residual flexural capacity of beam specimens was also sensitive to elevated temperatures, showing up to a 30% reduction. The effect of pre-existing cracks was more significant in the ductility ratio of beam specimens, with a higher reduction rate of ductility with respect to temperature compared to other response parameters.

ENGINEERING STRUCTURES (2021)

Add to Collection

Article Construction & Building Technology

Bond durability of basalt-fiber-reinforced-polymer bars embedded in lightweight aggregate concrete subjected to freeze-thaw cycles

Peng Deng et al.

Summary: The study found through experiments that the bonding performance of BFRP bars embedded in lightweight aggregate concrete is significantly affected under freeze-thaw cycles, and the fitting model is consistent with the experimental results.

STRUCTURAL CONCRETE (2021)

Add to Collection

Article Construction & Building Technology

The durability of seawater sea-sand concrete beams reinforced with metal bars or non-metal bars in the ocean environment

Zhiqiang Dong et al.

ADVANCES IN STRUCTURAL ENGINEERING (2020)

Add to Collection

Article Mechanics

Durability study of concrete-covered basalt fiber-reinforced polymer (BFRP) bars in marine environment

Zhongyu Lu et al.

COMPOSITE STRUCTURES (2020)

Add to Collection

Article Construction & Building Technology

Effects of UV radiation, moisture and elevated temperature on mechanical properties of GFRP pultruded profiles

Milad Bazli et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Bar size effect on long-term durability of sand-coated basalt-FRP composite bars

Ahmed H. Ali et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Effect of polyolefin macro fibers and handmade GFRP anchorage system on improving the bonding behavior of GFRP bars embedded in self-compacting lightweight concrete

Alireza Doostmohamadi et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Durability of pultruded GFRP tubes subjected to seawater sea sand concrete and seawater environments

Milad Bazli et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Mechanical properties of pultruded GFRP profiles under seawater sea sand concrete environment coupled with UV radiation and moisture

Milad Bazli et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Polymer Science

Strength Degradation in Curved Fiber-reinforced Polymer (FRP) Bars Used as Concrete Reinforcement

Thanongsak Imjai et al.

POLYMERS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Durability of seawater and sea sand concrete filled filament wound FRP tubes under seawater environments

Milad Bazli et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Bond performance between FRP tubes and seawater sea sand concrete after exposure to seawater condition

Milad Bazli et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Mechanics

Effect of thermal cycles on mechanical response of pultruded glass fiber reinforced polymer profiles of different geometries

Armin Jafari et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Polymer Science

Effect of Fibers Configuration and Thickness on Tensile Behavior of GFRP Laminates Exposed to Harsh Environment

Milad Bazli et al.

POLYMERS (2019)

Add to Collection

Correction Engineering, Civil

Bond-slip behaviour between FRP tubes and seawater sea sand concrete (vol 178, 10758, 2019)

Milad Bazli et al.

ENGINEERING STRUCTURES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Durability performance and long-term prediction models of sand-coated basalt FRP bars

Ahmed H. Ali et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of sustained load and seawater and sea sand concrete environment on durability of basalt- and glass-fibre reinforced polymer (B/GFRP) bars

Zike Wang et al.

CORROSION SCIENCE (2018)

Add to Collection

Article Engineering, Civil

Theoretical model for seawater and sea sand concrete-filled circular FRP tubular stub columns under axial compression

Y. L. Li et al.

ENGINEERING STRUCTURES (2018)

Add to Collection

Article Engineering, Civil

Effect of Sequential Exposure to UV Radiation and Water Vapor Condensation and Extreme Temperatures on the Mechanical Properties of GFRP Bars

Hamed Ashrafi et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2018)

Add to Collection

Article Materials Science, Characterization & Testing

Flexural and web crippling properties of GFRP pultruded profiles subjected to wetting and drying cycles in different sea water conditions

Asghar Vatani Oskouei et al.

POLYMER TESTING (2018)

Add to Collection

Article Construction & Building Technology

Durability test on the flexural performance of seawater sea-sand concrete beams completely reinforced with FRP bars

Zhiqiang Dong et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Engineering, Civil

Bond Properties of FRP-concrete Interface with Nano-modified Epoxy Resin under Wet-dry Cycles

Yue Li et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2017)

Add to Collection

Article Construction & Building Technology

Experiments and probabilistic models of bond strength between GFRP bar and different types of concrete under aggressive environments

Milad Bazli et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Laboratory assessment and durability performance of vinyl-ester, polyester, and epoxy glass-FRP bars for concrete structures

Brahim Benmokrane et al.

COMPOSITES PART B-ENGINEERING (2017)

Add to Collection

Article Engineering, Multidisciplinary

Effect of harsh environments on mechanical properties of GFRP pultruded profiles

Milad Bazli et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Engineering, Multidisciplinary

Effects of moisture on the long-term performance of adhesively bonded FRP/steel joints used in bridges

Mohsen Heshmati et al.

COMPOSITES PART B-ENGINEERING (2016)

Add to Collection

Article Engineering, Civil

Characterization and Comparative Durability Study of Glass/Vinylester, Basalt/Vinylester, and Basalt/Epoxy FRP Bars

Brahim Benmokrane et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2015)

Add to Collection

Article Construction & Building Technology

Bond strength of different strengthening systems - Concrete elements under freeze-thaw cycles and salt water immersion exposure

Firas Al-Mahmoud et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Engineering, Multidisciplinary

Effect of harsh environmental conditions on the tensile properties of GFRP bars

Yousef A. Al-Salloum et al.

COMPOSITES PART B-ENGINEERING (2013)

Add to Collection

Review Construction & Building Technology

Independent environmental effects on durability of fiber-reinforced polymer wraps in civil applications: A review

Paul Boeer et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Flexural durability of FRP bars embedded in fiber-reinforced-concrete

Huanzi Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Engineering, Civil

Bond Durability of FRP Bars Embedded in Fiber-Reinforced Concrete

Abdeldjelil Belarbi et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2012)

Add to Collection

Article Mechanics

Bond strength of CFRP-concrete elements under freeze-thaw cycles

Pierluigi Colombi et al.

COMPOSITE STRUCTURES (2010)

Add to Collection

Article Engineering, Civil

Wet Lay-Up Manufactured FRPs for Concrete and Masonry Repair: Influence of Water on the Properties of Composites and on Their Epoxy Components

Margherita Stefania Sciolti et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)

Add to Collection

Article Engineering, Civil

Temperature as an Accelerating Factor for Long-Term Durability Testing of FRPs: Should There Be Any Limitations?

Mathieu Robert et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2010)

Add to Collection

Article Mechanics

Short-term durability test for GFRP rods under various environmental conditions

Hyeong-Yeol Kim et al.

COMPOSITE STRUCTURES (2008)

Add to Collection

Article Mechanics

Accelerated aging tests for evaluations of durability performance of FRP reinforcing bars for concrete structures

Yi Chen et al.

COMPOSITE STRUCTURES (2007)

Add to Collection

Article Construction & Building Technology

FRP-confined concrete under axial cyclic compression

L. Lam et al.

CEMENT & CONCRETE COMPOSITES (2006)

Add to Collection

Article Construction & Building Technology

Creep and durability of sand-coated glass FRP bars in concrete elements under freeze/thaw cycling and sustained loads

Kader Laoubi et al.

CEMENT & CONCRETE COMPOSITES (2006)

Add to Collection

Article Construction & Building Technology

Durability issues of FRP rebars in reinforced concrete members

Francesca Ceroni et al.

CEMENT & CONCRETE COMPOSITES (2006)

Add to Collection

Article Engineering, Civil

Durability of FRP composite bridge deck materials under freeze-thaw and low temperature conditions

Hwai-Chung Wu et al.

JOURNAL OF BRIDGE ENGINEERING (2006)

Add to Collection

Article Construction & Building Technology

Durability of FRP rods for concrete structures

F Micelli et al.

CONSTRUCTION AND BUILDING MATERIALS (2004)

Add to Collection

Article Engineering, Civil

Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure

VM Karbhari et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2003)

Add to Collection

Article Polymer Science

Low-temperature hygrothermal degradation of ambient cured E-glass/vinylester composites

VM Karbhari et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.