☆ 4.7 Review

Exploring the use of mixed waste materials (MWM) in concrete for sustainable Construction: A review

CONSTRUCTION AND BUILDING MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Effect of municipal solid waste incineration bottom ash (MSWI-BA) on the structural performance of reinforced concrete (RC) beams

Jamal Khatib et al.

Summary: This paper investigates the use of municipal solid waste incineration bottom ash (MSWI-BA) in concrete application, specifically in reinforced concrete (RC) beams. The study shows that replacing 20% of fine aggregates with MSWI-BA can improve the compressive strength, tensile strength, and modulus of elasticity of concrete, but beyond 20% the properties decrease.

JOURNAL OF ENGINEERING DESIGN AND TECHNOLOGY (2023)

Add to Collection

Article Construction & Building Technology

Eco-friendly and cost-effective self-compacting concrete using waste banana leaf ash

Nusrat Jahan Mim et al.

Summary: The high requirements of cement content and admixtures in self-compacting concrete result in high production costs, limiting its use in everyday construction. This study investigates the characteristics of self-compacting concrete incorporating waste banana leaf ash (BLA) to reduce environmental effects while maintaining cost-effectiveness. The findings show that a 20% substitution of OPC with BLA demonstrates comparable strength to the control mix and significantly reduces CO2 emissions.

JOURNAL OF BUILDING ENGINEERING (2023)

Add to Collection

Article Engineering, Civil

Development of sustainable self-compacting concrete using recycled concrete aggregate and fly ash, slag, silica fume

Zhanggen Guo et al.

Summary: This study proposes a sustainable self-compacting concrete by replacing natural aggregates with recycled coarse aggregates and cement with supplementary cementitious materials. The combination of fly ash, slag, and silica fume can compensate for the negative effect of RCAs and increase the compressive strength. The research findings are significant for optimizing sustainability and reducing the use of nonrenewable resources.

EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING (2022)

Add to Collection

Review Construction & Building Technology

Recycling waste materials to produce self-sensing concretes for smart and sustainable structures: A review

Gustavo Henrique Nalon et al.

Summary: The construction industry is facing the challenge of applying sustainable materials and developing smart concretes. This paper reviews previous studies on combining strategies of incorporating recycled and waste materials into smart construction materials with self-sensing properties. Promising sustainable self-sensing composites (SSCs) are identified based on their electrical resistivity, strain-sensing properties, and damage-detection properties.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Study on the performance and sustainability of modified waste crumb rubber and steel slag powder/SBS composite modified asphalt mastic

Yongjun Meng et al.

Summary: This study proposes the incorporation of waste steel slag and waste rubber into asphalt to prepare asphalt mastic with increased mechanical properties and can thus concurrently limit environmental pollution from these wastes. The experimental results demonstrated that the coupling modified crumb rubber and steel slag powder significantly improved the high temperature performance of the asphalt mastic.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Strength, microstructure and nanomechanical properties of recycled aggregate concrete containing waste glass powder and steel slag powder

Pei-min Zhan et al.

Summary: This study investigates the effect of reusing construction and demolition wastes on the performance of recycled aggregate concrete (RAC) and the synergistic effect of steel slag powder (SSP) and waste glass powder (GP) on the compressive strength and microstructure of RAC. The results demonstrate that the incorporation of SSP and GP significantly improves the performance of RAC, enhancing its compressive strength and microstructure.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Construction & Building Technology

Fresh and hardened properties of recycled plastic fiber reinforced self-compacting concrete made with recycled concrete aggregate and fly ash, slag, silica fume

Chunru Dong et al.

Summary: This study investigates the influence of waste plastic fibers and supplementary cementitious materials (SCMs) on the properties of recycled aggregate self-compacting concrete (RA-SCC). The results show that the combined addition of SCMs and recycled plastic fibers can greatly improve the workability and mechanical properties of the concrete.

JOURNAL OF BUILDING ENGINEERING (2022)

Add to Collection

Article Green & Sustainable Science & Technology

How to promote sustainable development of construction and demolition waste recycling systems: Production subsidies or consumption subsidies

Feng Guo et al.

Summary: This paper develops a four-party evolutionary game model to study how to improve the recycling rate of construction waste in China. The results show that government subsidies can encourage enterprises to actively participate in construction waste recycling, but may not promote consumers to buy renewable products. Mobilizing public participation and regulating carbon trading price can have positive effects on construction waste recycling.

SUSTAINABLE PRODUCTION AND CONSUMPTION (2022)

Add to Collection

Review Green & Sustainable Science & Technology

Promoting sustainable materials using recycled rubber in concrete: A review

Jiangnan Mei et al.

Summary: There has been a significant increase in demand for vehicle tires in recent decades, leading to a rise in waste rubber globally. The current state of waste rubber recycling is unsustainable, with landfill dumping causing various health and environmental issues. This article analyzed relevant research papers and conducted a critical review to assess the application of recycled rubber as aggregate in cement-based composites. The study identified influential factors and their impact on the resulting material, highlighting the potential for sustainable construction materials and the need for further research in this area.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Review Engineering, Civil

Review of recycling waste plastics in asphalt paving materials

Lingyun You et al.

Summary: An ever-increasing demand for depleted natural resources is a major challenge for the global asphalt pavement industry. Recycling plastic waste in asphalt pavement is a possible solution to reduce environmental pressure and the demand for depleted natural resources. This review comprehensively evaluates the feasibility of various recycled plastics in asphalt pavement and identifies challenges and recommendations for the future.

JOURNAL OF TRAFFIC AND TRANSPORTATION ENGINEERING-ENGLISH EDITION (2022)

Add to Collection

Review Engineering, Civil

Prediction of the mechanical strength of concrete containing glass powder as partial cement replacement material

Rabab Raydan et al.

Summary: Utilizing glass powder as partial replacement for Portland cement can improve the durability and strength performance of concrete, with optimal performance observed at replacement levels between 10% and 15%.

INNOVATIVE INFRASTRUCTURE SOLUTIONS (2022)

Add to Collection

Article Construction & Building Technology

Production of Low-Cost, High-Strength Concrete with Waste Glass as Fine Aggregates Replacement

Ali Jahami et al.

Summary: This paper investigates the production of low-cost, high-strength concrete by replacing fine aggregates with waste glass sand. The study found that the presence of waste glass sand in the concrete enhances workability and improves mechanical properties. Furthermore, the addition of waste glass sand can significantly reduce production costs.

BUILDINGS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Concrete strength analysis using waste plastic as a partial replacement for sand

Sachindra Pratap Singh Rajawat et al.

Summary: The study investigates the effect of incorporating carbonated PET plastic wastes into concrete as a fine aggregate alternative on the achievable concrete strength. The results indicate that the compressive strength of concrete can be improved with an appropriate replacement proportion.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Investigating the fresh state performance of concrete containing iron slag and recycled concrete aggregates

Navdeep Singh et al.

Summary: Iron slag is a major industrial waste from the iron and steel manufacturing industry, and its disposal poses significant ecological threats. By utilizing industrial by-products like iron slag and recycled concrete aggregates, the workability, compressive strength, and permeability characteristics of concrete can be improved. The experimental study shows that the inclusion of iron slag and recycled concrete aggregates enhances the performance of concrete, encouraging their use in concrete manufacturing.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Strength characteristics of concrete using electronic plastic waste and coconut shell as natural aggregates

P. Krishna Kumar et al.

Summary: This experimental study investigated the effect of using electronic plastic waste (e-plastic waste) and Coconut Shell (CS) on the mechanical properties and strength characteristics of concrete. Different combinations were made by replacing aggregates with e-plastic waste, CS, and a combination of e-plastic waste and CS. The test results showed a decrease in density and compressive strength with the addition of both waste materials compared to conventional concrete. However, a specific combination of 15% e-plastic waste and 15% CS showed a similar failure pattern to conventional concrete. The concrete with CS exhibited greater toughness but showed brittle failure in the flexure test, while the concrete with e-plastic waste showed a ductile failure pattern with lesser resistance to compression and bonding.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Effect of the addition of nano glass powder on the compressive strength of high volume fly ash modified concrete

Ali M. Onaizi et al.

Summary: Using nanoparticles derived from waste glass bottles as a nano additive in high-volume fly ash (HVFA) concrete can improve early strength and compensate for the strength loss associated with fly ash. The study found that the workability of the concrete decreased when glass nanoparticles were added, but there was a significant improvement in compressive strength, especially when using 5% glass nanoparticles.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Experimental study on strength properties of concrete with partial replacement of coarse aggregate by rubber tyre waste

K. Dhivya et al.

Summary: This project studied the properties of modified concrete in which rubber tyre waste was used to partially replace coarse aggregates. The strength properties of different percentages of replacement were tested and compared with ordinary concrete.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Construction & Building Technology

The impact of RCA and fly ash on the mechanical and durability properties of polypropylene fibre-reinforced concrete exposed to freeze-thaw cycles and MgSO4 with ANN modeling

Oguzhan Yavuz Bayraktar et al.

Summary: The experimental study investigated the impact of recycled coarse aggregate (RCA) and fly ash (FA) on polypropylene fiber reinforced concretes. The results showed that the combined use of RCA, FA, and PPF significantly improved the compressive strength of the concrete. Concrete mixtures with 25% FA and 50% RCA achieved approximately 60 MPa compressive strength. The use of RCA in concretes with 25% FA improved the mechanical properties.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Synergistic effect and mechanism of waste glass on the mechanical properties and autoclave stability of cementitious materials containing steel slag

Lingling Zhang et al.

Summary: Incorporating steel slag powder and waste glass powder as cement replacements can improve mechanical strength and autoclave stability. Waste glass, as an amorphous siliceous material, enriches hydration products and fully consumes f-CaO in steel slag, resulting in the lowest expansion rate of the blended paste.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Flexural response of fiber reinforced concrete beams with waste tires rubber and recycled aggregate

Md. Shahjalal et al.

Summary: This research investigates the impact of waste materials on recycled concrete, improving its mechanical properties through the introduction of crumb rubber and polypropylene fiber. Concrete beams with the mixture of materials exhibit enhanced performance, while existing design guidelines are inadequate in assessing their load-bearing capacity.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Review Chemistry, Physical

Palm Oil Fuel Ash-Based Eco-Efficient Concrete: A Critical Review of the Short-Term Properties

Mugahed Amran et al.

Summary: The huge demand for concrete due to rapid construction developments has led to the exploration of supplemental cementing materials to reduce carbon dioxide emissions from cement production. Palm-oil-fuel-ash (POFA) is a byproduct with high pozzolanic characteristics, commonly used as a binder in eco-efficient concrete. This paper reviews the material source, composition, production, and properties of POFA, providing insights into its potential application in the construction industry.

MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Properties of mortar and pervious concrete with co-utilization of coal fly ash and waste glass powder as partial cement replacements

Sangchul S. Hwang et al.

Summary: By optimizing the composition of cement mortar mix, the study produced pervious concrete with good flowability and high compressive strength. The use of prediction models identified the impact of coal fly ash and milled waste glass powder on the properties of the mixture, demonstrating that the co-utilization of waste materials FA and GP can enhance the rate and extent of compressive strength development.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Partially fly ash incorporated recycled coarse aggregate based concrete: Microstructure perspectives and critical analysis

Sushree Sunayana et al.

Summary: This paper presents experimental investigation of the microstructure of partial cement substituted fly ash incorporated recycled aggregate concrete (FARAC). Different testing techniques were adopted to examine the effects of various parameters on the concrete properties. The study found that while FARAC showed some advantages in microstructure, it did not directly translate into higher compressive strength. The reduction of heterogeneities in the new ITZ and thickness of the old ITZ, as well as the impact of microcracks passing through the bulk paste, were observed.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Experimental investigation on concrete partially replaced with waste glass powder and waste E-plastic

B. Balasubramanian et al.

Summary: The study investigated the combined effect of Waste Electronic Plastic (WEP) and Waste Glass Powder (WGP) in concrete, showing that within certain replacement levels, these waste materials can improve the mechanical and durability performance of concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Eco-friendly mortar: Optimum combination of wood ash, crumb rubber, and fine crushed glass

Najib Gerges et al.

Summary: Globally, the use of green and recycled materials in civil engineering applications is on the rise, with waste materials such as wood ash, crumb rubber, and fine crushed glass being explored as partial replacements and substitutes in mortar mixes. The research investigated the combined utilization of these materials in mortar mixes without the need for chemical treatments or additives, aiming to produce an eco-friendly product with increased strength properties.

CASE STUDIES IN CONSTRUCTION MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Structural Performance of Reinforced Concrete Beams Incorporating Cathode-Ray Tube (CRT) Glass Waste

Jad Bawab et al.

Summary: The study showed that adding CRT glass waste to concrete can increase compressive strength, flexural strength, and modulus of elasticity, especially at the 10% replacement level. The load carrying capacity of reinforced concrete beams is higher when 10% of sand is replaced with CRT glass. The failure mode of the beams is flexural failure, and the strain distribution showed better ductility in the control beam.

BUILDINGS (2021)

Add to Collection

Article Construction & Building Technology

Field study on concrete footpath with recycled plastic and crushed glass as filler materials

Yat Choy Wong et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Durability performance of waste granite and glass powder added concrete

Kishan Lal Jain et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Influence of a steel slag powder-ground fly ash composite supplementary cementitious material on the chloride and sulphate resistance of mass concrete

Xiao Han et al.

POWDER TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Comparison of Drying Shrinkage of Concrete Specimens Recycled Heavyweight Waste Glass and Steel Slag as Aggregate

So Yeong Choi et al.

MATERIALS (2020)

Add to Collection

Article Environmental Sciences

Structural Assessment of Reinforced Concrete Beams Incorporating Waste Plastic Straws

Jamal M. Khatib et al.

ENVIRONMENTS (2020)

Add to Collection

Article Construction & Building Technology

Strength evaluation of utilizing recycled plastic waste and recycled crushed glass in concrete footpaths

Alireza Mohammadinia et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Investigating the effects of steel slag powder on the properties of self-compacting concrete with recycled aggregates

Zhihong Pan et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Utilization of unprocessed steel slag as fine aggregate in normal- and high-strength concrete

Yongchang Guo et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Mechanical properties of recycled aggregate concrete containing crumb rubber and polypropylene fiber

F. M. Zahid Hossain et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates

Yong Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Sustainable design of pervious concrete using waste glass and recycled concrete aggregate

Jian-Xin Lu et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Multicriteria Analysis of Glass Waste Application

Danguole Bisikirske et al.

ENVIRONMENTAL AND CLIMATE TECHNOLOGIES (2019)

Add to Collection

Proceedings Paper Construction & Building Technology

Reinforcement of building plaster by waste plastic and glass

Kennouche Salim et al.

3RD INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY (ICSI 2019) (2019)

Add to Collection

Article Construction & Building Technology

Combined influence of glass powder and granular steel slag on fresh and mechanical properties of self-compacting concrete

Shahir Rehman et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Mechanical properties and mechanisms of fiber reinforced fly ash-steel slag based geopolymer mortar

Xiaolu Guo et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Workability, strength, and durability of concrete containing recycled plastic fibers and styrene-butadiene rubber latex

Ankur C. Bhogayata et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Modelling and optimisation of concrete containing recycled concrete aggregate and waste glass

Nader Biglarijoo et al.

MAGAZINE OF CONCRETE RESEARCH (2017)

Add to Collection

Article Construction & Building Technology

Mechanical properties of concrete with recycled aggregates and waste glass

Viviana Letelier et al.

STRUCTURAL CONCRETE (2017)

Add to Collection

Review Construction & Building Technology

Practical recycling applications of crushed waste glass in construction materials: A review

Abbas Mohajerani et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Mechanical properties and spalling at elevated temperature of high performance concrete made with reactive and waste inert powders

Msheer Hasan Ali et al.

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2017)

Add to Collection

Article Construction & Building Technology

Mechanical properties of the concrete containing recycled fibers and aggregates

Mohsen Ahmadi et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Performance of concrete made with steel slag and waste glass

Xin Yu et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Construction & Building Technology

Portland-composite and composite cement concretes made with coarse recycled and recycled glass sand aggregates: Engineering and durability properties

Sevket Can Bostanci et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Green concrete production incorporating waste carpet fiber and palm oil fuel ash

A. S. M. Abdul Awal et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Performance of pavements incorporating waste glass: The current state of the art

Ali Jamshidi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Article Construction & Building Technology

Development of Processing Methods to Improve Strength of Concrete with 100% Recycled Coarse Aggregate

Yu-chang Liang et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)

Add to Collection

Article Construction & Building Technology

Utilization of fine recycled aggregates in concrete with fly ash and steel slag

E. Anastasiou et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

The use of steel slag aggregate to enhance the mechanical properties of recycled aggregate concrete and retain the environment

Hisham Qasrawi

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Engineering, Mechanical

Cement and concrete as an engineering material: An historic appraisal and case study analysis

Colin R. Gagg

ENGINEERING FAILURE ANALYSIS (2014)

Add to Collection

Article Construction & Building Technology

Combined effects of recycled aggregate and fly ash towards concrete sustainability

Kyuhun Kim et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Green Concrete Made with RCA and FRP Scrap Aggregate: Fresh and Hardened Properties

M. Shahria Alam et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)

Add to Collection

Article Construction & Building Technology

Durability of mortar using waste glass powder as cement replacement

Ana Mafalda Matos et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

Article Construction & Building Technology

Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement

Roz-Ud-Din Nassar et al.

CONSTRUCTION AND BUILDING MATERIALS (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.