Related references
Note: Only part of the references are listed.Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete
Jun Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Experimental and analytical investigation on chloride ions transport in concrete considering the effect of dry-exposure ratio under diurnal tidal environment
Yuanzhan Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2022)
Effect of exposure temperatures on chloride penetration resistance of concrete incorporating polypropylene Fibers, silica fume and metakaolin
Khaled A. Alawi Al-Sodani
CONSTRUCTION AND BUILDING MATERIALS (2022)
Experimental investigation on chloride-ion penetration resistance of slag containing fiber-reinforced concrete under drying-wetting cycles
Weige Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Numerical and experimental research on the effect of rainfall on the transporting behavior of chloride ions in concrete
Jun Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
The corrosion resistance of engineered cementitious composite (ECC) containing high-volume fly ash and low-volume bentonite against the combined action of sulfate attack and dry-wet cycles
Xiaoyi Quan et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Numerical model of the effect of water vapor environment on the chloride transport in concrete
Jun Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Investigation on mechanical and micro properties of concrete incorporating seawater and sea sand in carbonized environment
Jun Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Prediction of chloride concentration with elevation in concrete exposed to cyclic drying-wetting conditions in marine environments
Xueli Ju et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Influence of the rainfall intensity on the chloride ion distribution in concrete with different levels of initial water saturation
Hesong Jin et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Investigation of using limestone calcined clay cement (LC3) in engineered cementitious composites: The effect of propylene fibers and the curing system
Jun Liu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Influence of deicing salt on the surface properties of concrete specimens after 20 years
Jun Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Modeling the effect of temperature gradient on moisture and ionic transport in concrete
Yu Bai et al.
CEMENT & CONCRETE COMPOSITES (2020)
Evaluation of chloride ion penetration through concrete surface electrical resistivity of field naturally degraded structures present in marine environment
Carlos Eduardo Tino Balestra et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The difference in chloride ion diffusion coefficient of concrete made with drinking water and wastewater
Mohammad Sheikh Hassani et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Experimental investigation on the effect of sulfate attack on chloride diffusivity of cracked concrete subjected to composite solution
Feng Xu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Vertical water transport model in concrete based on the coupled effects of the capillarity, gravity and evaporation
Peng Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Steel-concrete interface influence on chloride threshold for corrosion - Empirical reinforcement to theory
Amit Kenny et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
The characterization of chloride effect on concrete water sorption and its application in the modelling of concrete conditions in tidal zones
Yu Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Degradation progress of Portland cement mortar under the coupled effects of multiple corrosive ions and drying-wetting cycles
Shukai Cheng et al.
CEMENT & CONCRETE COMPOSITES (2020)
Service life of reinforced concrete seawalls suffering from chloride attack: Theoretical modelling and analysis
Changyi Yang et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
A multi-phase mesoscopic simulation model for the diffusion of chloride in concrete under freeze-thaw cycles
Xuandong Chen et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Chloride diffusion behavior of engineered cementitious composite under dry-wet cycles
Renjuan Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Chloride profile modeling contemplating the convection zone based on concrete structures present for more than 40 years in different marine aggressive zones
Carlos Eduardo Tino Balestra et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Time-dependent correlation between micro-structural parameters and gas permeability of concrete in a natural tidal environment
Junzhi Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Contribution for durability studies based on chloride profiles analysis of real marine structures in different marine aggressive zones
Carlos Eduardo Tino Balestra et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Time-dependent corrosion process and non-uniform corrosion of reinforcement in RC flexural members in a tidal environment
Yanhong Gao et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Randomness of bidirectional chloride corrosion of sluice gate and time to corrosion initiation of reinforcement in a strong tidal environment
Yurong Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Research on chloride diffusion and flexural behavior of beams strengthened with TRC subjected to dry-wet cycles
Hua Yun-tao et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Randomness of critical chloride concentration of reinforcement corrosion in reinforced concrete flexural members in a tidal environment
Yanhong Gao et al.
OCEAN ENGINEERING (2019)
Closed-form solutions for modeling chloride transport in unsaturated concrete under wet-dry cycles of chloride attack
Aruz Petcherdchoo
CONSTRUCTION AND BUILDING MATERIALS (2018)
Prediction of chloride ingress into blended cement concrete: Evaluation of a combined short-term laboratory-numerical procedure
Mehdi Nemati Chari et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Experimental research and mechanism analysis on chloride ingress at different concrete zone along altitude in marine environment. Part 1. Moisture distribution
Linglei Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Quantifying maximum phenomenon in chloride ion profiles and its influence on service-life prediction of concrete structures exposed to seawater tidal zone - A field oriented study
Mehdi Khanzadeh Moradllo et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Prediction model of long-term chloride diffusion into plain concrete considering the effect of the heterogeneity of materials exposed to marine tidal zone
Yuanzhan Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effects of coarse aggregates on chloride diffusion coefficients of concrete and interfacial transition zone under experimental drying-wetting cycles
Yuanzhan Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Instantaneous chloride diffusion coefficient and its time dependency of concrete exposed to a marine tidal environment
Junzhi Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Time-and-Depth-Dependent Model of Chloride Diffusion Coefficient for Concrete Members Considering the Effect of Coarse Aggregate
Yuanzhan Wang et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2018)
Behavior of mortar exposed to different exposure conditions of sulfate attack
Xiao-tong Yu et al.
OCEAN ENGINEERING (2018)
Numerical and experimental study of moisture and chloride transport in unsaturated concrete
Congtao Sun et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Chlorine diffusion resistivity of sustainable green concrete in harsh marine environments
Mandi Valipour et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Time-dependent chloride penetration in concrete in marine environments
Lingjie Wu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Chloride transport and microstructure of concrete with/without fly ash under atmospheric chloride condition
Jun Liu et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Influence of pore structure and moisture distribution on chloride maximum phenomenon in surface layer of specimens exposed to cyclic drying-wetting condition
Honglei Chang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
The effect of moisture transport on chloride penetration in concrete
Lydia Homan et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Chloride penetration in concrete exposed to cyclic drying-wetting and carbonation
Hailong Ye et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Degradation of fly ash concrete under the coupled effect of carbonation and chloride aerosol ingress
Jun Liu et al.
CORROSION SCIENCE (2016)
Experimental Analysis of Chloride Penetration into Concrete Subjected to Drying-Wetting Cycles
Chunhua Lu et al.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)
Chloride penetration into concrete in an offshore platform-analysis of exposure conditions
Ronaldo Alves de Medeiros-Junior et al.
OCEAN ENGINEERING (2015)
Chloride ion transport mechanism in concrete due to wetting and drying cycles
Xu Gang et al.
STRUCTURAL CONCRETE (2015)
Predicting water permeability and relative gas permeability of unsaturated cement-based material from hydraulic diffusivity
Chunsheng Zhou
CEMENT AND CONCRETE RESEARCH (2014)
Reinforced concrete in marine environment: Effect of wetting and drying cycles, height and positioning in relation to the sea shore
M. H. F. Medeiros et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Initial corrosion presented by chloride threshold penetration of concrete up to 10 year-results under marine site
T. Cheewaket et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)