Related references
Note: Only part of the references are listed.A machine learning model to predict unconfined compressive strength of alkali-activated slag-based cemented paste backfill
Chathuranga Balasooriya Arachchilage et al.
JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2023)
The roles of cenosphere in ultra-lightweight foamed geopolymer concrete (UFGC)
Jinyan Shi et al.
CERAMICS INTERNATIONAL (2022)
Flexural strength and fatigue properties of interfacial transition zone at the microscale
Yidong Gan et al.
CEMENT & CONCRETE COMPOSITES (2022)
Thermal properties of calcium sulfoaluminate cement-based mortars incorporated with expanded perlite cured at cold temperatures
Guangping Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
A green ultra-lightweight chemically foamed concrete for building exterior: A feasibility study
Jinyan Shi et al.
JOURNAL OF CLEANER PRODUCTION (2021)
Feasibility of recycling waste carbon black in cement mortar production: Environmental life cycle assessment and performance evaluation
Mohammad R. Irshidat et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Utilization of Pyrolytic Carbon Black Waste for the Development of Sustainable Materials
Faizan Ali et al.
PROCESSES (2020)
Reducing GHG emissions through efficient tire consumption in open pit mines
Edmo Rodovalho et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Industrial Waste Utilization of Carbon Dust in Sustainable Cementitious Composites Production
Mohammad R. Irshidat et al.
MATERIALS (2020)
Effect of layer-distributed carbon nanotube (CNT) on mechanical and piezoresistive performance of intelligent cement-based sensor
Wenkui Dong et al.
NANOTECHNOLOGY (2020)
High-value utilization of waste tires: A review with focus on modified carbon black from pyrolysis
Junqing Xu et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2020)
Concrete made with waste marble powder and supplementary cementitious material for sustainable development
Deepankar Kumar Ashish
JOURNAL OF CLEANER PRODUCTION (2019)
Exploring the relation between the flow of mortar and specific surface area of its constituents
Y. Ghasemi et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Effect of the Interfacial Transition Zone on ultrasonic wave attenuation and velocity in concrete
Manda Ramaniraka et al.
CEMENT AND CONCRETE RESEARCH (2019)
Evaluation of recycled nano carbon black and waste erosion wires in electrically conductive concretes
Heydar Dehghanpour et al.
CONSTRUCTION AND BUILDING MATERIALS (2019)
Relationship between the thermal properties and degree of saturation of cementitious grouts used in vertical borehole heat exchangers
Daehoon Kim et al.
ENERGY AND BUILDINGS (2019)
Devulcanisation and reclaiming of tires and rubber by physical and chemical processes: A review
Lauris Bockstal et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Reverse logistics network design for large off-the-road scrap tires from mining sites with a single shredding resource scheduling application
Jorge Oyola-Cervantes et al.
WASTE MANAGEMENT (2019)
Upgrading pyrolytic carbon-blacks (CBp) from end-of-life tires: Characteristics and modification methodologies
Jiaxue Yu et al.
FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2019)
Recycled carbon black from waste of tire industry: thermal study
Rana Ida Sugatri et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2018)
Structural, mechanical and hygrothermal properties of lightweight concrete based on the application of waste plastics
Martina Zaleska et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Solar-Powered Pyrolysis of Scrap Rubber from Mining Truck End-of-Life Tires - A Case Study for the Mining Industry in the Atacama Desert, Chile
Gustavo Diaz-Ferran et al.
INTERNATIONAL CONFERENCE ON CONCENTRATING SOLAR POWER AND CHEMICAL ENERGY SYSTEMS (SOLARPACES 2017) (2018)
Thermal conductivity of concrete - A review
Iman Asadi et al.
JOURNAL OF BUILDING ENGINEERING (2018)
Effect of Moisture Content on Thermal Properties of Porous Building Materials
Vaclav Koci et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2017)
Reducing environmental impacts via improved tyre wear management
Edmo da Cunha Rodovalho et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Effect of thermal insulation using leather and carpentry wastes on thermal comfort and energy consumption in a residential building
Hicham Lakrafli et al.
ENERGY EFFICIENCY (2017)
Assessment of Recovered Carbon Black Obtained by Waste Tires Steam Water Thermolysis: An Industrial Application
L. Moulin et al.
WASTE AND BIOMASS VALORIZATION (2017)
The influence of moisture content on the thermal conductivity of external thermal mortars
M. Gloria Gomes et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Thermal conductivity of structural lightweight aggregate concrete
Sofia Real et al.
MAGAZINE OF CONCRETE RESEARCH (2016)
Mechanical and thermophysical properties of lightweight aggregate concretes
Hasan Oktay et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
Thermal properties of lightweight dry-mix shotcrete containing. expanded perlite aggregate
W. V. Liu et al.
CEMENT & CONCRETE COMPOSITES (2014)
Aerogel-incorporated concrete: An experimental study
Tao Gao et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Thermal conductivity, compressive strength and ultrasonic wave velocity of cementitious composite containing waste PET lightweight aggregate (WPLA)
Semiha Akcaozoglu et al.
COMPOSITES PART B-ENGINEERING (2013)
Moisture content influence on the thermal conductivity and diffusivity of wood-concrete composite
Driss Taoukil et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Study of carbon black obtained by pyrolysis of waste scrap tyres
Zuzana Jankovska et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2013)
Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete
Ozkan Sengul et al.
ENERGY AND BUILDINGS (2011)
Measurements of thermal properties of insulation materials by using transient plane source technique
Saleh A. Al-Ajlan
APPLIED THERMAL ENGINEERING (2006)
Effect of microstructure of ITZ on compressive strength of concrete prepared with recycled aggregates
CS Poon et al.
CONSTRUCTION AND BUILDING MATERIALS (2004)
Thermo physical characteristics of economical building materials
P Meukam et al.
CONSTRUCTION AND BUILDING MATERIALS (2004)
On the origin of eigenstresses in lightweight aggregate concrete
P Lura et al.
CEMENT & CONCRETE COMPOSITES (2004)
Relationship between ultrasonic velocity and compressive strength for high-volume mineral-admixtured concrete
R Demirboga et al.
CEMENT AND CONCRETE RESEARCH (2004)
The effects of expanded perlite aggregate, silica fume and fly ash on the thermal conductivity of lightweight concrete
R Demirboga et al.
CEMENT AND CONCRETE RESEARCH (2003)
Strength properties of lightweight concrete made with basaltic pumice and fly ash
E Yasar et al.
MATERIALS LETTERS (2003)
Factors affecting the thermal properties of concrete and applicability of its prediction models
MI Khan
BUILDING AND ENVIRONMENT (2002)
Environmental effects of recycled rubber in light-fill applications
HS Liu et al.
RUBBER CHEMISTRY AND TECHNOLOGY (2000)