☆ 4.7 Article

Durability assessment of concrete with natural and Linz Donawitz slag as coarse aggregates

CONSTRUCTION AND BUILDING MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Review Construction & Building Technology

A review of steel slag as a substitute for natural aggregate applied to cement concrete

Zhennan Li et al.

Summary: This article summarizes the feasibility and effects of using steel slag as a substitute for natural aggregate in concrete, verifying its excellent engineering properties. Steel slag has certain effects on the physical properties and microstructure of concrete but is controversial in some aspects. Finally, the article proposes future research trends for concrete with steel slag aggregate.

ROAD MATERIALS AND PAVEMENT DESIGN (2023)

Add to Collection

Article Construction & Building Technology

Utilisation of aged and unaged basic oxygen furnace steel slag aggregates in pavement quality concrete

Binod Kumar

Summary: The study evaluated the properties of pavement quality concrete (PQC) with aged and unaged basic oxygen furnace (BOF) slag as coarse aggregates. Workability, air content, strength, drying shrinkage, expansion, abrasion resistance, and expansive potential were assessed. Fresh slag concrete showed a slight increase in air content and workability. The compressive and flexural strength of concrete with aged and unaged slag aggregates was lower than that of normal concrete. The reduction in strength was higher for concrete with aged slag aggregates due to a dusty coating. Drying shrinkage increased with steel slag content. Slag concrete exhibited better abrasion resistance than conventional concrete. Normal water curing for 90 days did not cause deterioration, but accelerated aging at 70 degrees C resulted in localized cracking and eruptions. Both aged and unaged slag aggregates can be used for road construction.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2023)

Add to Collection

Review Polymer Science

Mechanical Properties and Durability of Geopolymer Recycled Aggregate Concrete: A Review

Peng Zhang et al.

Summary: This paper summarizes the research on Geopolymer recycled aggregate concrete (GPRAC), including its mechanical properties, durability, and microscopic aspects. It is found that GPRAC can be improved by factors such as curing temperature, precursor materials, fibers, nanoparticles, and mix ratios. Using multiple precursor materials tends to show better performance. Furthermore, using modified recycled aggregates can reduce porosity and water absorption. The results show that GPRAC meets engineering requirements and has advantages over traditional concrete in terms of reducing carbon emissions and environmental pollution.

POLYMERS (2023)

Add to Collection

Review Construction & Building Technology

Self-compacting lightweight aggregate concrete and its properties: A review

Pawan Kumar et al.

Summary: This paper comprehensively analyzes different properties of lightweight aggregates (LWA) based on self-compacting concrete (SCC), highlighting their use as green materials in the construction sector. The study concludes that incorporating LWA in SCC improves or shows equivalent performance compared to control SCC, making it a recommended choice for sustainable development. The paper also highlights various types of LWA, such as expanded clay aggregates and walnut shells, and reviews their effects on the fresh, mechanical, and durability properties of SCC.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

Performance evaluation of steel slag high performance concrete for sustainable pavements

Ragaa T. Abd El-Hakim et al.

Summary: This paper presents the results of an experimental study on high-performance concrete mixes containing various percentages of electric arc furnace steel slag (EAFSS) coarse aggregate. The research also investigated the use of steel slag powder (SSP) and silica fume (SF) as mineral fillers. The findings suggest that concrete mixes with 50% EAFSS exhibit the best mechanical properties and performance. Using SSP powder with or instead of SF did not significantly improve the concrete properties.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Improving mechanical behavior and microstructure of concrete by using BOF steel slag aggregate

M. H. Lai et al.

Summary: Research shows that replacing coarse and fine aggregates with BOFSS in concrete can significantly improve the later-age compressive strength and microstructure of concrete. Therefore, using BOFSS in concrete benefits environmental protection and material greenness, while enhancing the performance of concrete.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Construction & Building Technology

Steel slags in cement-based composites: An ultimate review on characterization, applications and performance

Ana Carolina Pereira Martins et al.

Summary: Steel slags, by-products in the steel industry, consist of calcium, silicon, ferric, aluminum, and magnesium oxides. Despite concerns over expansive compounds in cement-based composites, mitigation strategies have been proposed. Activating techniques enhance the binding properties of steel slag powder for potential use as SCM.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Review Environmental Sciences

Utilization of Linz-Donawitz slag from steel industry for waste minimization

S. K. Singh et al.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Mechanical performance study of pervious concrete using steel slag aggregate through laboratory tests and numerical simulation

Guotong Wang et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Application of steel slag in cement treated aggregate base course

Jinzhou Liu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Construction & Building Technology

Utilization of unprocessed steel slag as fine aggregate in normal- and high-strength concrete

Yongchang Guo et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

Durability of concrete with electric arc furnace slag aggregate

M. A. Gonzalez-Ortega et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Construction & Building Technology

The setting behavior, mechanical properties and drying shrinkage of ternary blended concrete containing granite quarry dust and processed steel slag aggregate

Jay Sern Lim et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Developing biotechnological technique for reuse of wastewater and steel slag in bio-concrete

Shekhar Saxena et al.

JOURNAL OF CLEANER PRODUCTION (2019)

Add to Collection

Article Construction & Building Technology

Impact of use of steel slag as coarse aggregate and wastewater on fresh and hardened properties of concrete

Shekhar Saxena et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Cement-Based Materials Containing Graphene Oxide and Polyvinyl Alcohol Fiber: Mechanical Properties, Durability, and Microstructure

Wenguang Jiang et al.

NANOMATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Life Cycle Assessment (LCA) of Different Kinds of Concrete Containing Waste for Sustainable Construction

Francesco Colangelo et al.

BUILDINGS (2018)

Add to Collection

Article Engineering, Environmental

Is gravel becoming scarce? Evaluating the local criticality of construction aggregates

Dimitra Ioannidou et al.

RESOURCES CONSERVATION AND RECYCLING (2017)

Add to Collection

Article Construction & Building Technology

Mechanical and durability characteristics of High Performance Concrete containing steel slag and crystalized slag as aggregates

Yasmina Biskri et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Steel furnace slag aggregate expansion and hardened concrete properties

Alexander S. Brand et al.

CEMENT & CONCRETE COMPOSITES (2015)

Add to Collection

Article Construction & Building Technology

Utilization of carbonated and granulated steel slag aggregate in concrete

Bo Pang et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

The use of steel slag aggregate to enhance the mechanical properties of recycled aggregate concrete and retain the environment

Hisham Qasrawi

CONSTRUCTION AND BUILDING MATERIALS (2014)

Add to Collection

Article Construction & Building Technology

Utilization of weathered basic oxygen furnace slag in the production of hydraulic road binders

P. -Y. Mahieux et al.

CONSTRUCTION AND BUILDING MATERIALS (2009)

Add to Collection

Article Engineering, Environmental

Evaluation of steel slag coarse aggregate in hot mix asphalt concrete

Perviz Ahmedzade et al.

JOURNAL OF HAZARDOUS MATERIALS (2009)

Add to Collection

Article Construction & Building Technology

Influence of fly ash as cement replacement on the properties of recycled aggregate concrete

Shi Cong Kou et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2007)

Add to Collection

Article Engineering, Civil

Use of steel slag aggregate in asphalt concrete mixes

Ibrahim M. Asi et al.

CANADIAN JOURNAL OF CIVIL ENGINEERING (2007)

Add to Collection

Review Engineering, Environmental

Studies on the corrosion resistance of reinforced steel in concrete with ground granulated blast-furnace slag - An overview

Ha-Won Song et al.

JOURNAL OF HAZARDOUS MATERIALS (2006)

Add to Collection

Article Construction & Building Technology

Comparison of properties of steel slag and crushed limestone aggregate concretes

M Maslehuddin et al.

CONSTRUCTION AND BUILDING MATERIALS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.