☆ 4.7 Article

Buildability modeling of 3D-printed concrete including printing deviation: A stochastic analysis

CONSTRUCTION AND BUILDING MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Robotics

Reliable Monte Carlo localization for mobile robots

Naoki Akai

Summary: This paper focuses on the reliability of mobile robot localization and presents a novel localization framework that enables robust localization, reliability estimation, and quick relocalization. The method increases localization robustness by estimating known and unknown obstacles, but localization failure can occur due to unanticipated errors. It also includes a reliability estimation function and can seamlessly integrate a global localization method to achieve quick relocalization and mitigate noisy influence. Experimental results demonstrate the realization of reliable MCL for robust localization, self-failure detection, and quick failure recovery.

JOURNAL OF FIELD ROBOTICS (2023)

Add to Collection

Article Engineering, Civil

Wind-induced probabilistic failure analysis of super large cooling tower with random field properties

Yan-Ping Liang et al.

Summary: This study investigates an actual super large cooling tower under strong wind using the finite element analysis method and proposes a three-stage non-Gaussian random field representation to characterize the spatial variability of material properties. The results show that the spatial variability of material properties does not affect the wind-induced failure mode of the cooling tower, but it does affect the ultimate capacity.

JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2023)

Add to Collection

Article Chemistry, Analytical

A Structure-Based Iterative Closest Point Using Anderson Acceleration for Point Clouds with Low Overlap

Chao Zeng et al.

Summary: Traditional point-cloud registration algorithms require large overlap between scans, which limits data acquisition. In this work, we propose a method based on high-level feature extraction to establish structure correspondences and solve an optimization problem. By parameterizing the transform matrix with Lie algebra and introducing Anderson acceleration, our proposed ICP method achieves robust and accurate registration on laser datasets with low overlap, while maintaining competitive computational time compared to prevalent methods.

SENSORS (2023)

Add to Collection

Article Construction & Building Technology

Influence of structuration rate, with hydration accelerating admixture, on the physical and mechanical properties of concrete for 3D printing

Ariane Prevedello Rubin et al.

Summary: The study investigated the effects of the concave exponential evolution of structuration rate (Athix) with an aluminum sulfate-based hydration accelerating admixture on the physical and mechanical properties of 3D printed concretes. Three printable concrete mixes were used. The results showed that Athix had minimal impact on the physical and mechanical properties when using multiple batches for printing. However, it did affect critical deformation behavior and interlayer adhesion. In some cases, it improved compressive strength and enhanced physical/chemical interlayer bonding, potentially expanding the printing window.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Add to Collection

Article Construction & Building Technology

3D concrete printing for sustainable and economical construction: A comparative study

Mustafa Batikha et al.

Summary: This research compares the efficiency of 3D Concrete Printing (3DCP) to other construction methods in terms of construction duration, cost, and CO2 emissions. The study shows that, except for prefabricated modular concrete, 3DCP significantly reduces construction duration by about 95% and offers the greatest cost savings while producing approximately 32% less CO2 emissions compared to cold-formed steel.

AUTOMATION IN CONSTRUCTION (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Random fields representation over manifolds via isometric feature mapping-based dimension reduction

De-Cheng Feng et al.

Summary: This paper proposes a two-stage strategy to map manifolds to 2D Euclidean space using Isometric feature mapping, allowing for the generation of random fields over irregular geometries. The stochastic harmonic function method is used to generate random fields, and case studies on stochastic finite element analysis of different structures are performed to demonstrate applicability and efficiency of the proposed method.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2022)

Add to Collection

Article Construction & Building Technology

Geometric quality assurance for 3D concrete printing and hybrid construction manufacturing using a standardised test part for benchmarking capability

Richard Buswell et al.

Summary: The importance of quality control and assurance in 3D Concrete Printing is widely recognized, but there is a lack of systematic methods for evaluating, diagnosing, improving, monitoring, and comparing system performance within the field. This work draws inspiration from the test geometry approach in Additive Manufacturing to establish a reproducible benchmark for evaluating and assuring part geometric quality of 3DCP systems, providing useful information for process comparison and performance improvement. The test part and measurement approach offered by this work provide a means for cross-platform benchmarking of 3DCP system performance within the 3DCP community.

CEMENT AND CONCRETE RESEARCH (2022)

Add to Collection

Article Mechanics

Failure modeling of concrete: A peri-dynamical approach with bond-based correspondence to bi-scalar damage model

Jinggao Zhu et al.

Summary: In this paper, a peridynamic approach is employed to model the failure behavior of concrete. A bond-based correspondence framework is established based on the simplest peridynamic model, which allows for the incorporation of classical constitutive models. A thermodynamically consistent damage model, named the bi-scalar plasticity-damage model, is incorporated to capture the tensile and compressive behavior of concrete. The proposed model is validated through simulations of plain concrete and reinforced concrete cases, and the results show its capability in reproducing different failure modes of concrete.

ENGINEERING FRACTURE MECHANICS (2022)

Add to Collection

Article Construction & Building Technology

Numerical simulation of elastic buckling in 3D concrete printing using the lattice model with geometric nonlinearity

Ze Chang et al.

Summary: This paper investigates the buildability quantification of randomly meshed 3D printed concrete objects by considering the structural failure caused by elastic buckling. A newly proposed model is presented, which takes into account the relevant printing parameters and their influence on the printing process. Through computational tests and analysis, the model accurately reproduces the asymmetry of buckling failure and predicts the critical printing height in agreement with experimental data. The combined effect of material variability and non-uniform gravitational loading during sequential printing process is found to result in structural failure during 3D concrete printing.

AUTOMATION IN CONSTRUCTION (2022)

Add to Collection

Article Mathematics, Interdisciplinary Applications

A curing model for the numerical simulation within additive manufacturing of soft polymers using peridynamics

Philipp Hartmann et al.

Summary: This paper presents the modelling and simulation of extrusion-based Additive Manufacturing processes of curing polymers, aiming to effectively control the geometry of implants through numerical simulations. A process-dependent large strain curing model is formulated to simulate material behavior, allowing for material spreading in a fluid-like state while reducing the accumulation of elastic stored energy.

COMPUTATIONAL PARTICLE MECHANICS (2021)

Add to Collection

Review Construction & Building Technology

A review of 3D printed concrete: Performance requirements, testing measurements and mix design

Shaodan Hou et al.

Summary: 3D printed concrete (3DPC) plays an important role in the industrialization of the construction industry, but faces challenges such as printing materials and different performance requirements in applications. The study emphasizes the printability, mechanical properties, and durability requirements of 3DPC, and the need for specialized testing methods and more accurate testing standards for 3DPC structures.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A discrete lattice model for assessment of buildability performance of 3D-printed concrete

Ze Chang et al.

Summary: In this study, a lattice model is used to analyze the 3D concrete printing process and propose new failure criteria, simulation techniques, and parameter analyses. The model successfully replicates plastic collapse modes and yields valuable insights on the impact of non-uniform gravitational load and material variation. Validation with experimental data shows good agreement for certain structures but discrepancies for others, prompting further discussion on possible reasons and improvements.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Development of Communication Protocols between BIM Elements and 3D Concrete Printing

Eric Forcael et al.

Summary: This research focuses on developing communication protocols for architectural and structural design firms to connect BIM projects with robots capable of printing 3D concrete elements. It aims to provide effective communication between BIM-designed elements and additive concrete manufacturing using an articulated robotic arm, by preparing computer code and analyzing test results.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Construction & Building Technology

Effect of testing procedures on buildability properties of 3D-printable concrete

Lorenzo Casagrande et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Review Construction & Building Technology

Extrusion-based additive manufacturing with cement-based materials - Production steps, processes, and their underlying physics: A review

V Mechtcherine et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Article Construction & Building Technology

Elastic buckling and plastic collapse during 3D concrete printing

A. S. J. Suiker et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Article Construction & Building Technology

Modelling of 3D concrete printing based on computational fluid dynamics

Raphael Comminal et al.

CEMENT AND CONCRETE RESEARCH (2020)

Add to Collection

Article Construction & Building Technology

Direct shear test for the assessment of rheological parameters of concrete for 3D printing applications

Roshan Jayathilakage et al.

MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Chemistry, Physical

The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing

Yu Chen et al.

MATERIALS (2019)

Add to Collection

Article Automation & Control Systems

Structural failure during extrusion-based 3D printing processes

R. J. M. Wolfs et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Construction & Building Technology

3D concrete printing: A lower bound analytical model for buildability performance quantification

Jacques Kruger et al.

AUTOMATION IN CONSTRUCTION (2019)

Add to Collection

Article Construction & Building Technology

Large-scale digital concrete construction-CONPrint3D concept for on-site, monolithic 3D-printing

Viktor Mechtcherine et al.

AUTOMATION IN CONSTRUCTION (2019)

Add to Collection

Article Construction & Building Technology

Triaxial compression testing on early age concrete for numerical analysis of 3D concrete printing

R. J. M. Wolfs et al.

CEMENT & CONCRETE COMPOSITES (2019)

Add to Collection

Article Construction & Building Technology

Design of 3D printable concrete based on the relationship between flowability of cement paste and optimum aggregate content

Chao Zhang et al.

CEMENT & CONCRETE COMPOSITES (2019)

Add to Collection

Article Construction & Building Technology

Early age mechanical behaviour of 3D printed concrete: Numerical modelling and experimental testing

R. J. M. Wolfs et al.

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Construction & Building Technology

Rheological requirements for printable concretes

Nicolas Roussel

CEMENT AND CONCRETE RESEARCH (2018)

Add to Collection

Article Engineering, Mechanical

Mechanical performance of wall structures in 3D printing processes: Theory, design tools and experiments

A. S. J. Suiker

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)

Add to Collection

Proceedings Paper Automation & Control Systems

Improvement of the mobile robot location dedicated for habitable house construction by 3D printing

Kevin Subrin et al.

IFAC PAPERSONLINE (2018)

Add to Collection

Article Construction & Building Technology

Structural built-up of cement-based materials used for 3D-printing extrusion techniques

A. Perrot et al.

MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Mathematics, Interdisciplinary Applications

A rate-dependent stochastic damage-plasticity model for quasi-brittle materials

Xiaodan Ren et al.

COMPUTATIONAL MECHANICS (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Multiscale hydro-thermo-mechanical model for early-age and mature concrete structures

Libor Jendele et al.

ADVANCES IN ENGINEERING SOFTWARE (2014)

Add to Collection

Article Mechanics

Stochastic Harmonic Function Representation of Stochastic Processes

Jianbing Chen et al.

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2013)

Add to Collection

Article Engineering, Multidisciplinary

Peridynamic states and constitutive modeling

S. A. Silling et al.

JOURNAL OF ELASTICITY (2007)

Add to Collection

Article Mechanics

An energy release rate-based plastic-damage model for concrete

JY Wu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)

Add to Collection

Article Chemistry, Multidisciplinary

Capillary forces between two spheres with a fixed volume liquid bridge: Theory and experiment

YI Rabinovich et al.

LANGMUIR (2005)

Add to Collection

Article Engineering, Multidisciplinary

Convergence study of the truncated Karhunen-Loeve expansion for simulation of stochastic processes

SP Huang et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2001)

Add to Collection

Article Materials Science, Multidisciplinary

Reformulation of elasticity theory for discontinuities and long-range forces

SA Silling

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.