☆ 4.7 Article

A modified Newmark block method for determining the seismic displacement of a slope reinforced by prestressed anchors

COMPUTERS AND GEOTECHNICS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Geological

Assessment of seismic behavior of back-to-back mechanically stabilized earth walls using 1g shaking table tests

Majid Yazdandoust et al.

Summary: This study investigates the seismic behavior of back-to-back MSE walls (BBMSEWs) by analyzing the effect of overlap length of reinforcements and arrangement of connecting two opposing walls. The results show that the fundamental frequency of BBMSEWs is strongly influenced by the arrangement of reinforcements, with a decrease observed in the f(f) value as the overlap length decreases. Increasing the overlap length and separating the bottom half of the walls can effectively reduce acceleration amplification in BBMSEWs. The failure surface geometry is found to be unaffected by overlap length changes, but rather determined by the arrangement of connecting two opposing walls. Additionally, increasing the a(y) values through overlap length and connection changes suggests that direct connection of walls and suitable overlap length can improve the seismic stability of BBMSEWs. It is also noted that while the use of overlapping reinforcement leads to increased lateral displacements, it can reduce mobilized reinforcement forces in BBMSEWs.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Three-dimensional rigorous upper-bound limit analysis of soil slopes subjected to variable seismic excitations

Ze-Hang Qian et al.

Summary: In this study, a semi-analytical model that combines the three-dimensional (3D) kinematic approach of limit analysis and the modified pseudo-dynamic method was developed to assess the critical safety factor of slopes from a realistic and holistic perspective. The model utilizes time-space dependent sinusoidal-cosinusoidal waves to represent cyclic effects of seismic waves and incorporates shaking amplitude and damping effect. A 3D discretized failure mechanism comprising a series of kinematically admissible triangle meshes was generated. Numerical simulations and comparisons of dynamic safety factors and plastic zones were conducted to evaluate the accuracy of the proposed model. Comparisons and parametric analyses highlighted the importance of considering the third dimension of slopes, damping ratios, and the relationship between shaking frequency and natural frequency.

COMPUTERS AND GEOTECHNICS (2022)

Add to Collection

Article Engineering, Geological

Centrifuge Modeling of the Seismic Behavior of Soft Clay Slopes

Cristian Yair Soriano Camelo et al.

Summary: This paper presents the results and analysis of two centrifuge experiments simulating the seismic response of a gentle slope in soft clay. The experiments found that the slope angle and shaking intensity had an impact on the seismic response, with the six-degree slope experiencing three times greater permanent displacements than the three-degree slope.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

Research on influence of anchor cable failure on slope dynamic response

Zhibo Jia et al.

Summary: Anchor cables are widely used in slope reinforcement and their fracture can cause slope instability. This study focuses on modifying the anchor cable model to simulate fracture effects. The dynamic response characteristics and the influence of pre-tension are analyzed. It is found that anchor cable failure significantly affects slope safety and can lead to the release of soil stress, resulting in larger residual displacement.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

A state parameter-based scaling law for centrifuge modelling

Qiang Ma et al.

Summary: A state parameter-based centrifuge scaling law is proposed in this paper to ensure the same shear strain between the model and the prototype. The proposed scaling law controls the model and the prototype to have the same initial state parameter by adjusting the void ratio of the model. The applicability of the proposed scaling law is confirmed by centrifuge model test results.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

Pseudo-dynamic analysis of reinforced slope with anchor cables

Jiaping Sun et al.

Summary: This work proposes a novel approach combining the minimum potential energy principle with the pseudo-dynamic method to determine the safety factor of reinforced slopes. By solving the mobilized shear stress on the slip surface using the moment equilibrium equation and introducing the elastic foundation coefficient, the slope stability is evaluated by calculating the ratio of the anti-sliding moment to the sliding moment. The method is efficient and accurate, and the influence of various factors on the safety factor is examined.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

Pseudo-static analysis of reinforced earth retaining walls

H. Alhajj Chehade et al.

Summary: This paper examines the seismic behavior of earth retaining walls using the upper bound theorem of limit analysis and discretization technique, with pseudo-static approach to model seismic effects. The extended methodology proposed is validated against conventional limit analysis results and a parametric study is conducted to identify the effects of key parameters on required reinforcement strength.

ACTA GEOTECHNICA (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Reliability analysis on permanent displacement of earth slopes using the simplified bishop method

Jian Ji et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Environmental Sciences

Seismic behavior of a single-form lattice anchoring structure and a combined retaining structure supporting soil slope: a comparison

Yu-liang Lin et al.

ENVIRONMENTAL EARTH SCIENCES (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Earthquake-induced slope displacements in heterogeneous soils with tensile strength cut-off

Guang-Hui Chen et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Effect of bedrock acceleration on dynamic and pseudo-static analyses of soil-pile systems

Hyunsung Lim et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Engineering, Geological

Numerical analysis of LEAP centrifuge tests on sloping liquefiable ground: Influence of dilatancy and post-liquefaction shear deformation

Ben He et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2020)

Add to Collection

Article Engineering, Geological

Allowable Displacement of Slope Supported by Frame Structure with Anchors under Earthquake

Shuaihua Ye et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2020)

Add to Collection

Article Engineering, Geological

Adjustment of spectral pseudo-static approach to account for soil plasticity and zone seismicity

Mourad Karray et al.

CANADIAN GEOTECHNICAL JOURNAL (2019)

Add to Collection

Article Engineering, Geological

Sliding stability and lateral displacement analysis of reinforced soil retaining walls

Peng Xu et al.

GEOTEXTILES AND GEOMEMBRANES (2019)

Add to Collection

Article Engineering, Geological

Shaking table modeling of MSE/soil nail hybrid retaining walls

Majid Yazdandoust

SOILS AND FOUNDATIONS (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Limit analysis under seismic conditions of a slope reinforced with prestressed anchor cables

Minjia Yan et al.

COMPUTERS AND GEOTECHNICS (2019)

Add to Collection

Article Engineering, Geological

Model establishment and response analysis of slope reinforced by frame with prestressed anchors under seismic considering the prestress

Shuaihua Ye et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2019)

Add to Collection

Article Engineering, Geological

Framework to assess pseudo-static approach for seismic stability of clayey slopes

Mourad Karray et al.

CANADIAN GEOTECHNICAL JOURNAL (2018)

Add to Collection

Article Engineering, Geological

Influence of slope property variabilities on seismic sliding displacement analysis

Wenqi Du et al.

ENGINEERING GEOLOGY (2018)

Add to Collection

Article Engineering, Geological

Application of a Probabilistic Assessment of the Permanent Seismic Displacement of a Slope

Yubing Wang et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2018)

Add to Collection

Article Engineering, Geological

Seismic response of a sheet-pile wall with anchoring frame beam by numerical simulation and shaking table test

Yu-liang Lin et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2018)

Add to Collection

Article Engineering, Civil

Predicting seismic permanent displacement of soil walls under surcharge based on limit analysis approach

Mohammad Mahdi Aminpour et al.

EARTHQUAKE ENGINEERING AND ENGINEERING VIBRATION (2018)

Add to Collection

Article Engineering, Geological

Seismic displacement along a log-spiral failure surface with crack using rock Hoek-Brown failure criterion

Lian-heng Zhao et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2017)

Add to Collection

Article Engineering, Geological

Experimental and numerical study on the seismic behavior of anchoring frame beam supporting soil slope on rock mass

Yu-liang Lin et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2017)

Add to Collection

Article Engineering, Geological

Effect of the vertical earthquake component on permanent seismic displacement of soil slopes based on the nonlinear Mohr-Coulomb failure criterion

Lian-heng Zhao et al.

SOILS AND FOUNDATIONS (2017)

Add to Collection

Article Engineering, Geological

A one-step Newmark displacement model for probabilistic seismic slope displacement hazard analysis

Wenqi Du et al.

ENGINEERING GEOLOGY (2016)

Add to Collection

Article Engineering, Geological

Effects of vertical seismic force on initiation of the Daguangbao landslide induced by the 2008 Wenchuan earthquake

Yingbin Zhang et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2015)

Add to Collection

Article Engineering, Geological

Seismic stability and displacement analyses of earth slopes using non-circular slip surface

Masahiro Shinoda

SOILS AND FOUNDATIONS (2015)

Add to Collection

Article Engineering, Geological

Displacement versus pseudo-static evaluation of the seismic performance of sliding retaining walls

Giovanni Biondi et al.

BULLETIN OF EARTHQUAKE ENGINEERING (2014)

Add to Collection

Article Engineering, Civil

Prediction of seismic displacements in gravity retaining walls based on limit analysis approach

Mohammad Mojallal et al.

STRUCTURAL ENGINEERING AND MECHANICS (2013)

Add to Collection

Article Engineering, Civil

An analytical technique for estimation of seismic displacements in reinforced slopes based on horizontal slices method (HSM)

Ali Ghanbari et al.

GEOMECHANICS AND ENGINEERING (2013)

Add to Collection

Article Environmental Sciences

Seismic stability analysis of soil nail reinforced slope using kinematic approach of limit analysis

Siming He et al.

ENVIRONMENTAL EARTH SCIENCES (2012)

Add to Collection

Article Engineering, Geological

A new analytical method for calculating seismic displacements in reinforced retaining walls

M. Mojallal et al.

GEOSYNTHETICS INTERNATIONAL (2012)

Add to Collection

Article Engineering, Civil

Decoupled Solution for Seismic Permanent Displacement of Earth Slopes Using Deformation-Dependent Yield Acceleration

Mohammad H. Baziar et al.

JOURNAL OF EARTHQUAKE ENGINEERING (2012)

Add to Collection

Article Engineering, Geological

Stability analysis of multi-directional anchored rock slope subjected to surcharge and seismic loads

Sanjay Kumar Shukla et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2011)

Add to Collection

Article Engineering, Geological

Seismic Displacement of Slopes Reinforced with Piles

Xinpo Li et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2010)

Add to Collection

Article Engineering, Geological

Earthquake-induced displacements of gravity retaining walls and anchor-reinforced slopes

Aurelian C. Trandafir et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2009)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Design implications of the vertical pseudo-static coefficient in slope analysis

Robert Shukha et al.

COMPUTERS AND GEOTECHNICS (2008)

Add to Collection

Article Engineering, Geological

Pseudo-static seismic analysis of reinforced soil wall - Effect of oblique displacement

G. V. Narasimha Reddy et al.

GEOTEXTILES AND GEOMEMBRANES (2008)

Add to Collection

Article Engineering, Geological

Assessment of the vertical distribution on seismic ground motion

K Sato et al.

SOIL DYNAMICS AND EARTHQUAKE ENGINEERING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.