☆ 4.7 Article

Limit load space of rigid strip footing on sand slope subjected to combined eccentric and inclined loading

COMPUTERS AND GEOTECHNICS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Marine

Bearing capacity and deformation behavior of rigid strip footings on coral sand slopes

Zhao-gang Luo et al.

Summary: This study investigates the bearing capacity and deformation behavior of a rigid strip footing on coral sand slopes using model-scale tests. The results show that geogrid reinforcement significantly improves the bearing capacity of coral sand slopes. The bearing capacity increases with the increasing edge distance and the decreasing slope height and angle.

OCEAN ENGINEERING (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Bearing capacity of shallow strip foundations on reinforced soil subjected to combined loading using upper bound theorem of finite element limit analysis and second-order cone programming

Ardavan Izadi et al.

Summary: The bearing capacity of shallow strip foundations on both unreinforced and reinforced granular soils under combined loading conditions was analyzed using upper bound limit analysis and second-order cone programming. The inclusion of horizontal geogrid elements in the granular soil was used to reinforce the foundation. The results were compared and validated against different cases and showed that the reinforcement layer(s) significantly improved the bearing capacity in the V-M space.

COMPUTERS AND GEOTECHNICS (2023)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Limit load space of rigid strip footing on cohesive-frictional soil subjected to eccentrically inclined loads

Quang N. Pham et al.

Summary: This paper estimates the ultimate bearing capacity of rigid strip footings under eccentrically inclined loads using the rigid plastic finite element method. The study considers the effect of soil properties and footing width on the loading planes and clarifies the effect of positive and negative horizontal loads on the limit load space. The results show that the direction of the horizontal load has a notable effect on the bearing capacity, but this effect becomes negligible for large eccentricity lengths.

COMPUTERS AND GEOTECHNICS (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Seismic bearing capacity factor N? for a rough strip footing on sloping ground

Jyant Kumar et al.

Summary: The method of stress characteristics (MOSC) and finite elements limit analysis (FELA) were employed to compute the bearing capacity factor N gamma for a rough strip footing over sloping ground surface in the presence of horizontal pseudo-static earthquake inertial forces. Two different failure mechanisms were considered and the results from both analyses were found to be very close.

COMPUTERS AND GEOTECHNICS (2022)

Add to Collection

Article Engineering, Geological

Influence of failure mechanism on seismic bearing capacity factors for shallow foundations near slopes

Shangchuan Yang et al.

Summary: This study uses upper-bound kinematic limit analysis to determine the mechanism of failure and bearing capacity factors for shallow foundations near slopes subject to seismic action. The seismic bearing capacity factors are influenced by transitions in failure mechanism, soil properties, and finite configurations of slope and footing geometry, demonstrating significant non-linearity.

GEOTECHNIQUE (2021)

Add to Collection

Article Engineering, Geological

Ultimate Bearing Capacity of Rigid Footing on Two-Layered Soils of Sand-Clay

Quang N. Pham et al.

Summary: This study investigates the ultimate bearing capacity of a rigid footing on the free surface of sand overlying clay using rigid-plastic finite-element method. Interface elements and new constitutive equations were introduced to evaluate the interaction between the footing and the soil, and design charts and new bearing capacity formulas were developed. The study found that the failure mode of two-layered soils changes from general shear mode to punching shear mode with a reduction in the shear strength of the clay layer.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Eccentric bearing capacity of embedded strip footings placed on slopes

Chengchao Li et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Undrained stability analysis of eccentrically loaded strip footing lying on layered slope by finite element limit analysis

Gaoqiao Wu et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Engineering, Geological

Effect of Eccentric Load on the Undrained Bearing Capacity of Strip Footings above Voids

Gaoqiao Wu et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2020)

Add to Collection

Article Engineering, Geological

Limit load space of rigid footing under eccentrically inclined load

Quang N. Pham et al.

SOILS AND FOUNDATIONS (2020)

Add to Collection

Proceedings Paper Engineering, Civil

Bearing capacity of footing resting on sand for eccentric vertical load

Pham Ngoc Quang et al.

GEOTECHNICS FOR SUSTAINABLE INFRASTRUCTURE DEVELOPMENT (2020)

Add to Collection

Article Engineering, Geological

Numerical Investigation of Bearing Capacity of Spudcan Foundations in Clay Overlying Sand under Combined Loading

Yifa Wang et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Ultimate bearing capacity of strip footings on sand overlying clay under inclined loading

Gang Zheng et al.

COMPUTERS AND GEOTECHNICS (2019)

Add to Collection

Article Engineering, Geological

Undrained Bearing Capacity of Strip Footings Placed Adjacent to Two-Layered Slopes

Yao Xiao et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2019)

Add to Collection

Article Engineering, Geological

Bearing Capacity of an Eccentrically Loaded Strip Footing on Reinforced Sand Slope

A. Abdi et al.

SOIL MECHANICS AND FOUNDATION ENGINEERING (2019)

Add to Collection

Article Engineering, Geological

Ultimate bearing capacity of rigid footing under eccentric vertical load

Quang N. Pham et al.

SOILS AND FOUNDATIONS (2019)

Add to Collection

Article Engineering, Geological

Ultimate seismic bearing capacities and failure mechanisms for strip footings placed adjacent to slopes

Haizuo Zhou et al.

CANADIAN GEOTECHNICAL JOURNAL (2019)

Add to Collection

Article Engineering, Geological

Group effect on ultimate lateral resistance of piles against uniform ground movement

Quang N. Pham et al.

SOILS AND FOUNDATIONS (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

The bearing capacity and failure mechanism of a vertically loaded strip footing placed on the top of slopes

Haizuo Zhou et al.

COMPUTERS AND GEOTECHNICS (2018)

Add to Collection

Article Engineering, Geological

Bearing Capacity for Spread Footings Placed Near c′-φ′ Slopes

Ben Leshchinsky et al.

JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING (2017)

Add to Collection

Article Engineering, Geological

Bearing Capacity of Embedded Strip Footings on Cohesionless Soil Under Vertical and Horizontal Loads

Hadjer Yahia-Cherif et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Undrained capacity of surface foundations with zero-tension interface under planar V-H-M loading

Z. Shen et al.

COMPUTERS AND GEOTECHNICS (2016)

Add to Collection

Article Engineering, Geological

Discussion on size effect of footing in ultimate bearing capacity of sandy soil using rigid plastic finite element method

Du L. Nguyen et al.

SOILS AND FOUNDATIONS (2016)

Add to Collection

Article Engineering, Geological

Effect of footing width on Nγ and failure envelope of eccentrically and obliquely loaded strip footings on sand

Chong Tang et al.

CANADIAN GEOTECHNICAL JOURNAL (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Bearing capacity of strip footings on two-layered clay under combined loading

Pingping Rao et al.

COMPUTERS AND GEOTECHNICS (2015)

Add to Collection

Article Engineering, Geological

Bearing capacity of eccentrically loaded strip footings close to geotextile-reinforced sand slope

Emel Turker et al.

CANADIAN GEOTECHNICAL JOURNAL (2014)

Add to Collection

Article Engineering, Civil

Model studies of bearing capacity of strip footing on sand slope

M. Salih Keskin et al.

KSCE JOURNAL OF CIVIL ENGINEERING (2013)

Add to Collection

Article Engineering, Geological

Undrained Stability of Footings on Slopes

J. S. Shiau et al.

INTERNATIONAL JOURNAL OF GEOMECHANICS (2011)

Add to Collection

Article Computer Science, Interdisciplinary Applications

The influence of load inclination on the undrained bearing capacity of strip footings on slopes

Konstantinos Georgiadis

COMPUTERS AND GEOTECHNICS (2010)

Add to Collection

Article Engineering, Geological

Bearing capacity of strip footings on purely frictional soil under eccentric and inclined loads

D. Loukidis et al.

CANADIAN GEOTECHNICAL JOURNAL (2008)

Add to Collection

Article Engineering, Geological

Hybrid type rigid plastic finite element analysis for bearing capacity characteristics of surface uniform loading

S Kobayashi

SOILS AND FOUNDATIONS (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.