Journal
COMPUTERS AND GEOTECHNICS
Volume 159, Issue -, Pages -Publisher
ELSEVIER SCI LTD
DOI: 10.1016/j.compgeo.2023.105431
Keywords
Self -weight consolidation; Analytical solution; Horizontal drain; Variable load; Layered soil
Ask authors/readers for more resources
This study proposes an analytical solution to describe the self-weight consolidation of a two-layer soil under variable load and semi-permeable boundary condition. The solution is validated against field tests, analytical solutions, and numerical simulations. The study investigates the influence of boundary drainage capacity, self-weight, load rate, and soil layering features. It is found that the consolidation ratio difference between complete pervious and semi-permeable boundary conditions decreases with increasing semi-permeability coefficient. The excess pore pressure is affected by the self-weight, with the maximum pressure appearing below the middle depth, especially at the early stages. The dissipation of excess pore pressure is hindered when the soil layer with lower consolidation coefficient is at the bottom. A design curve for the time of consolidation completion is provided, which can serve as a useful reference in engineering practices for two-layer soil consolidation.
In this study, an analytical solution is proposed to describe one-dimensional self-weight consolidation of twolayer soil under variable load and semi-permeable boundary condition. The analytical solution is comprehensively validated against existing field test, analytical solution and numerical simulation results. The influence of drainage capacity of boundary, self-weight, load rate, and soil layering features are then investigated. The difference of consolidation ratio between the complete pervious boundary condition and the semi-permeable boundary condition decreases with increasing semi-permeability coefficient R. Considering the self-weight will increase the excess pore pressure and make the maximum pressure appear below the middle depth, especially at the early time. The effect will be weaker and weaker and finally disappear. The dissipation of excess pore pressure is significantly impeded if the soil layer with lower consolidation coefficient is at the bottom. Finally, the design curve of the time for practical completion of consolidation (tst) is provided. An almost flat part can be observed in the curve if the relative thickness of the layer with lower consolidation coefficient ranges from 0.1 to 0.23, indicating that the influence of relative thickness on tst is negligible over this range, which provides a helpful reference for two-layer soil consolidation in engineering practices.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available