☆ 4.7 Article

A micromechanical fatigue damage model for quasi-brittle rocks subjected to triaxial compressive cyclic loads

COMPUTERS AND GEOTECHNICS (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Damage evaluation of rock salt under multilevel cyclic loading with constant stress intervals using AE monitoring and CT scanning

Kai Zhao et al.

Summary: This study investigates the damage evolution of salt caverns under cyclic loading, using acoustic emission monitoring and CT scanning to evaluate stability. Results show that damage accumulates with increasing cycles and loading stages, with different types of cracks present in the rock salt.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Anisotropic mechanical characteristics and energy evolution of artificial columnar jointed rock masses subjected to multi-level cyclic loading

Tao Zhang et al.

Summary: This study investigates the effect of joint dip angle, fatigue effect, and stress level on the mechanical properties and failure behavior of CJRM specimens. The results indicate that the relationship between the characteristic stress and joint dip angle follows a typical U-shaped pattern, and the fatigue effect increases the number and distribution of cracks in CJRM specimens.

INTERNATIONAL JOURNAL OF FATIGUE (2022)

Add to Collection

Article Engineering, Geological

A Novel Staged Cyclic Damage Constitutive Model for Brittle Rock Based on Linear Energy Dissipation Law: Modelling and Validation

Fengqiang Gong et al.

Summary: A novel staged cyclic damage constitutive model for brittle rock is proposed and verified in this study. The model accurately reflects the cyclic loading-unloading behaviors and hysteresis process of brittle rocks by considering the accumulation effect of plastic strain, providing an important reference for studying rock damage and constitutive model for brittle rocks.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Add to Collection

Article Engineering, Geological

Investigations on the macro-meso cumulative damage mechanism of the discontinuities in soft-hard interbedded rock mass under pre-peak cyclic shear loading

Bin Xu et al.

Summary: The macro-meso cumulative damage mechanism of discontinuities in soft-hard interbedded rock mass was investigated through laboratory tests and numerical calculations. The shear stress-displacement curve can be divided into six stages, and the variations of shear strength and displacement under different conditions were analyzed. The curve of meso cumulative damage crack number shows different characteristics in the early, middle, and later stages. Typical failure modes of rock discontinuities were summarized, including compaction-crack initiation failure, cyclic dislocation-penetration failure, and separation-gnawing failure. The distribution of cumulative damage cracks was evaluated.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2022)

Add to Collection

Article Engineering, Mechanical

Experimental study on creep properties of salt rock under long-period cyclic loading

Junbao Wang et al.

Summary: The creep behavior of salt rock under long-period cyclic loading is affected by the maximum cycling stress and period. The creep process can be divided into different stages, and different trends are observed when damage occurs.

INTERNATIONAL JOURNAL OF FATIGUE (2021)

Add to Collection

Article Engineering, Mechanical

A variational-based homogenization model for plastic shakedown analysis of porous materials with a large range of porosity

J. Zhang et al.

Summary: A new homogenization model is developed for porous media, with a macroscopic fatigue criterion being established based on the variational principle. Dirac's measure is adopted to simplify the volume integral, showing the dependence of the plastic shakedown limit load on the invariants of the macroscopic stress tensor. The new criterion significantly improves the accuracy of plastic shakedown limit prediction for porous materials with large values of porosity.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Micromechanical modelling of short- and long-term behavior of saturated quasi-brittle rocks

Shuang-Shuang Yuan et al.

MECHANICS OF MATERIALS (2020)

Add to Collection

Article Engineering, Geological

Strengthening effects of cyclic load on rock and concrete based on experimental study

Chen Weichang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Add to Collection

Article Mechanics

Shakedown of porous material with Drucker-Prager dilatant matrix under general cyclic loadings

J. Zhang et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Engineering, Mechanical

Using acoustic emission technique to monitor damage progress around joints in brittle materials

M. Naderloo et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)

Add to Collection

Article Engineering, Mechanical

Hysteresis energy-based failure indicators for concrete and brittle rocks under the condition of fatigue loading

Zhengyang Song et al.

INTERNATIONAL JOURNAL OF FATIGUE (2018)

Add to Collection

Article Engineering, Mechanical

Shakedown of porous materials

J. Zhang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Engineering, Mechanical

Experimental and theoretical investigation of the frequency effect on low cycle fatigue of shape memory alloys

Yahui Zhang et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2017)

Add to Collection

Article Energy & Fuels

Shale failure processes and spatial distribution of fractures obtained by AE monitoring

Shan Wu et al.

JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING (2017)

Add to Collection

Article Engineering, Geological

Micromechanics of rock damage: Advances in the quasi-brittle field

Qizhi Zhu et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2017)

Add to Collection

Article Engineering, Geological

Damage constitutive model based on energy dissipation for intact rock subjected to cyclic loading

X. S. Liu et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)

Add to Collection

Article Engineering, Geological

A unified micromechanics-based damage model for instantaneous and time-dependent behaviors of brittle rocks

L. Y. Zhao et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Analytical and numerical analysis of frictional damage in quasi brittle materials

Q. Z. Zhu et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)

Add to Collection

Article Geochemistry & Geophysics

Experimental investigation on mechanical damage characteristics of sandstone under triaxial cyclic loading

Sheng-Qi Yang et al.

GEOPHYSICAL JOURNAL INTERNATIONAL (2015)

Add to Collection

Article Engineering, Geological

Effects of cyclic dynamic loading on the mechanical properties of intact rock samples under confining pressure conditions

Enlong Liu et al.

ENGINEERING GEOLOGY (2012)

Add to Collection

Article Mechanics

Micromechanical analysis of damage in saturated quasi brittle materials

Ni Xie et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2012)

Add to Collection

Article Mechanics

A micromechanics-based thermodynamic formulation of isotropic damage with unilateral and friction effects

Q. Z. Zhu et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2011)

Add to Collection

Article Engineering, Geological

Investigation and modeling on fatigue damage evolution of rock as a function of logarithmic cycle

Jian-Qing Xiao et al.

INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2011)

Add to Collection

Article Mechanics

Micromechanical analysis of coupling between anisotropic damage and friction in quasi brittle materials: Role of the homogenization scheme

Q. Z. Zhu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)

Add to Collection

Article Mechanics

An energy release rate-based plastic-damage model for concrete

JY Wu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)

Add to Collection

Article Engineering, Mechanical

Damage model for fatigue loading of concrete

A Alliche

INTERNATIONAL JOURNAL OF FATIGUE (2004)

Add to Collection

Article Engineering, Mechanical

Description of creep in inherently anisotropic frictional materials

S Pietruszczak et al.

JOURNAL OF ENGINEERING MECHANICS (2004)

Add to Collection

Article Engineering, Mechanical

Micromechanical analysis of anisotropic damage in brittle materials

V Pensée et al.

JOURNAL OF ENGINEERING MECHANICS (2002)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A continuum damage mechanics model for concrete reinforced with randomly distributed short fibers

X Peng et al.

COMPUTERS & STRUCTURES (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.