Related references
Note: Only part of the references are listed.Progress in interlaminar toughening of aerospace polymer composites using particles and non-woven veils
O. Inal et al.
AERONAUTICAL JOURNAL (2022)
Interlaminar fracture and crack-healing capability of carbon fiber/epoxy composites toughened with 3D-printed poly-ε-caprolactone grid structures
Bertan Beylergil
JOURNAL OF APPLIED POLYMER SCIENCE (2022)
On mode-I and mode-II interlaminar crack migration and R-curves in carbon/epoxy laminates with hybrid toughening via core-shell rubber particles and thermoplastic micro-fibre veils
Mehmet Cagatay Akbolat et al.
COMPOSITES PART B-ENGINEERING (2022)
On the R-curve behaviour of carbon/epoxy laminates with core-shell rubber nanoparticle and micro-fibre veil hybrid toughening: Carbon vs PPS veils
Sheng Wang et al.
POLYMER (2022)
Interleaving light veils to minimise the trade-off between mode-I interlaminar fracture toughness and in-plane properties
S. M. Garcia-Rodriguez et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)
Experimental and statistical analysis of carbon fiber/epoxy composites interleaved with nylon 6,6 nonwoven fabric interlayers
Bertan Beylergil et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Towards balancing in-plane mechanical properties and impact damage tolerance of composite laminates using quasi-UD woven fabrics with hybrid warp yarns
K. B. Katnam et al.
COMPOSITE STRUCTURES (2019)
Effect of polyamide-6,6 (PA 66) nonwoven veils on the mechanical performance of carbon fiber/epoxy composites
Bertan Beylergil et al.
COMPOSITE STRUCTURES (2018)
Innovative materials of this era for toughening the epoxy matrix: A review
Jitha S. Jayan et al.
POLYMER COMPOSITES (2018)
Compression properties of composite laminates reinforced with rectangular z-pins
Julian Hoffmann et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
Improvement of Mode I Interlaminar Fracture Toughness of Stitched Glass/Epoxy Composites
D. Goektas et al.
APPLIED COMPOSITE MATERIALS (2017)
Enhancement of interlaminar fracture toughness of carbon fiber-epoxy composites using polyamide-6,6 electrospun nanofibers
Bertan Beylergil et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
The reversibility of Mode-I and -II interlaminar fracture toughness after hydrothermal aging of Carbon/Benzoxazine composites with a thermoplastic toughening interlayer
N. H. Nash et al.
COMPOSITE STRUCTURES (2016)
Toughening performance of glass fibre composites with core-shell rubber and silica nanoparticle modified matrices
Shamsiah Awang Ngah et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
The influence of a thermoplastic toughening interlayer and hydrothermal conditioning on the Mode-II interlaminar fracture toughness of Carbon/Benzoxazine composites
N. H. Nash et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Enhanced toughness and glass transition temperature of epoxy nanocomposites filled with solvent-free liquid-like nanocrystal-functionalized graphene oxide
Peipei Li et al.
MATERIALS & DESIGN (2016)
The influence of hydrothermal conditioning on the Mode-I, thermal and flexural properties of Carbon/Benzoxazine composites with a thermoplastic toughening interlayer
N. H. Nash et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Influence of z-pin length on the delamination fracture toughness and fatigue resistance of pinned composites
F. Pegorin et al.
COMPOSITES PART B-ENGINEERING (2015)
Effect of core-shell rubber (CSR) nano-particles on mechanical properties and fracture toughness of an epoxy polymer
Dong Quan et al.
POLYMER (2015)
Effect of hydrothermal ageing on the thermal and delamination fracture behaviour of CFRP composites
Sabina Alessi et al.
COMPOSITES PART B-ENGINEERING (2014)
Effect of hygrothermal conditioning on the fracture toughness of carbon/epoxy composites cured in autoclave/Quickstep
Laraib Alam Khan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013)
The mechanical properties and toughening mechanisms of an epoxy polymer modified with polysiloxane-based core-shell particles
J. Chen et al.
POLYMER (2013)
Hybrid polymeric composites reinforced with sisal fibres and silica microparticles
Leandro Jose da Silva et al.
COMPOSITES PART B-ENGINEERING (2012)
The mechanisms and mechanics of the toughening of epoxy polymers modified with fullerene C60
Vjacheslav V. Zuev
POLYMER ENGINEERING AND SCIENCE (2012)
Resistance to delamination of 3D woven textile composites evaluated using End Notch Flexure (ENF) tests: Experimental results
M. Pankow et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)
Influence of mode ratio and hygrothermal condition on the delamination toughness of a thermoplastic particulate interlayered carbon/epoxy composite
B. D. Davidson et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Properties and failure mechanisms of z-pinned laminates in monotonic and cyclic tension
P. Chang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Effect of reinforcement and solvent content on moisture absorption in epoxy composite materials
FU Buehler et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2000)